HIK VISION DS-KD8003-IME2 Manual de usuario
Module Door Staon
User Manual
UD30508B
Legal Informaon
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instrucons for using and managing the
Product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change,
without noce, due to rmware updates or other reasons. Please
nd the latest version of this Manual at the Hikvision website
( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of
professionals trained in supporng the Product.
Trademarks
and other Hikvision's trademarks
and logos are the properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of
their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
i
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATTER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored
and processed. To protect data, the development of Hikvision
devices incorporates privacy by design principles. For example,
for device with facial recognion features, biometrics data is
stored in your device with encrypon method; for ngerprint
device, only ngerprint template will be saved, which is
impossible to reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and
transfer data in accordance with the applicable data protecon
laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as,
implemenng reasonable administrave and physical security
controls, conduct periodic reviews and assessments of the
eecveness of your security controls.
ii
Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
iii
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
iv
This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable
harmonized European standards listed under
the EMC Direcve 2014/30/EU, the RoHS
Direcve 2011/65/EU
2012/19/EU (WEEE direcve): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collecon points. For more
informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may include
leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the
baery to your supplier or to a designated
collecon point. For more informaon
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operaon is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference
that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaon
est autorisée aux deux condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepble d'en
compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent
émeeur radio peut fonconner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intenon des autres ulisateurs, il faut choisir
v
le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et ulisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
Power Source Detail
The power source should be qualied and meet limited power
source or PS2 requirements according to IEC 60950-1 or IEC
62368-1 standard.
vi
Contents
1 Introducon ............................................................. 1
2 Appearance .............................................................. 1
3 Terminal and Wiring ................................................. 7
3.1 Terminal Descripon ............................................. 7
3.2 Module Door Staon Wiring ............................... 10
3.2.1 Door Lock Wiring ....................................... 10
3.2.2 Door Contact Wiring .................................. 11
3.2.3 Exit Buon Wiring ...................................... 11
3.2.4 RS-485 Card Reader Wiring ....................... 11
4 Installaon ............................................................. 12
4.1 Congure Sub Module Address .......................... 12
4.2 Two-Module Installaon ..................................... 13
4.2.1 Two-Module Surface Mounng ................. 13
4.2.2 Two-Module Flush Mounng .................... 16
4.3 Three-Module Installaon .................................. 19
4.3.1 Three-Module Surface Installaon ............ 19
4.3.2 Three-Module Flush Mounng .................. 22
4.4 More-Than-Three Module Installaon ............... 25
4.4.1 More-than-Three Module Surface Mounng
............................................................................. 25
4.4.2 More-Than-Three Module Flush Mounng
............................................................................. 29
5 Acvaon ............................................................... 34
5.1 Acvate Device via Client Soware .................... 34
5.2 Edit Network Parameters .................................... 35
6 Remote Conguraon via Web ............................... 35
6.1 Live View ............................................................. 35
6.2 User Management .............................................. 36
6.3 Device Management ........................................... 36
vii
6.4 Remote Conguraon ......................................... 37
6.4.1 Local Parameters Sengs .......................... 37
6.4.2 System Sengs .......................................... 38
6.4.3 Network Sengs ....................................... 40
6.4.4 Video & Audio Sengs .............................. 43
6.4.5 Image Sengs ........................................... 44
6.4.6 Event Sengs ............................................ 47
6.4.7 Schedule Sengs ....................................... 48
6.4.8 Intercom Sengs ....................................... 49
6.4.9 Access Control Sengs .............................. 53
6.4.10 Theme Sengs ........................................ 54
7 Conguraon via Client Soware ............................ 55
7.1 Device Management ........................................... 55
7.1.1 Add Online Device ..................................... 55
7.1.2 Add Device by IP Address .......................... 56
7.1.3 Add Device by IP Segment ......................... 56
7.2 Live View via Door Staon .................................. 56
7.3 Remote Conguraon ......................................... 57
7.3.1 Device Management .................................. 57
7.3.2 Local Parameters Sengs .......................... 57
7.3.3 System Sengs .......................................... 58
7.3.4 Network Sengs ....................................... 61
7.3.5 Video & Audio Sengs .............................. 63
7.3.6 Image Sengs ........................................... 65
7.3.7 Schedule Sengs ....................................... 67
7.3.8 Intercom Sengs ....................................... 68
7.3.9 Access Control Sengs .............................. 71
7.4 Organizaon Management ................................. 73
7.4.1 Add Organizaon ....................................... 73
7.4.2 Modify and Delete Organizaon ................ 74
viii
7.5 Person Management ........................................... 74
7.5.1 Add Person ................................................ 74
7.5.2 Modify and Delete Person ......................... 75
7.5.3 Import and Export Person Informaon ...... 75
7.5.4 Get Person Informaon from Device ......... 76
7.5.5 Change Person to Other Organizaon ....... 76
7.5.6 Issue Card in Batch .................................... 76
8 Video Intercom Operaon ...................................... 77
8.1 Video Intercom Operaon via Device ................. 77
8.1.1 Call Resident .............................................. 77
8.1.2 Issue Card .................................................. 79
8.1.3 Unlock Door ............................................... 79
8.2 Video Intercom Operaon via Client Soware ... 80
8.2.1 Receive Call from Door Staon .................. 80
8.2.2 Live View via Door Staon ......................... 81
8.2.3 View Call Logs ............................................ 81
8.2.4 Search Video Intercom Informaon .......... 82
A. Relevant Instrucons for External Power Supply and
Wiring of 2-wire Video Intercom Products (2020-1-20)
.................................................................................. 85
B. Communicaon Matrix and Device Command ....... 88
ix
Otros manuales para DS-KD8003-IME2
2
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de HIK VISION
HIK VISION
HIK VISION DS-KH9510- WTE1B Manual de usuario
HIK VISION
HIK VISION KD8023E6 Series Manual de usuario
HIK VISION
HIK VISION DS-K3B802X Series Manual de usuario
HIK VISION
HIK VISION DS-KB2411-IM Manual de usuario
HIK VISION
HIK VISION DS-KM8301 Manual de usuario
HIK VISION
HIK VISION DS-KIS203T Manual de usuario
HIK VISION
HIK VISION DS-KH6100-E1 Manual de usuario
HIK VISION
HIK VISION D Series Manual de usuario
HIK VISION
HIK VISION VDP-H2211 Manual de usuario
HIK VISION
HIK VISION DS-KIS703-P Manual de usuario
HIK VISION
HIK VISION DS-KD8002-VM Manual de usuario
HIK VISION
HIK VISION DS-1350HMI Manual de usuario
HIK VISION
HIK VISION DS-KD-M Manual de usuario
HIK VISION
HIK VISION KB8113 Manual de usuario
HIK VISION
HIK VISION DS-KIS204T Manual de usuario
HIK VISION
HIK VISION DS-TMC403-E Manual de usuario
HIK VISION
HIK VISION DS-KD8003-IME2 Manual de usuario
HIK VISION
HIK VISION DS-KH8520-WTE1 Manual de usuario
HIK VISION
HIK VISION DS-KM9503 Manual de usuario
HIK VISION
HIK VISION DS-KIS202 Manual de usuario
