PRODUCT OVERVIEW-PURE
Front Panel
①③ ④ ⑤ ⑦② ⑥
1.VIDEO INPUT
Video input from external devices such
as DVD players, video gaming devices or
camcorders.
2.AUDIO INPUT L/R
Audio input from external devices such
as DVD players, video gaming devices or
camcorders.
3.POWER LED
The green light lit indicates power on
4.RESET
To reset the Device
5.MODE
Viewing mode (On/On), Erase EEPROM (On/
Off), software update (Off/On), PAL/NTSC/
SECAM mode switch (Off/Off)
6.RS232
Connects to PC for updating software with
RS232 cable 2 and 3 pin crossed
7.IR SENSOR
Remote control focus point
⊕Mode: 4 different modes. Each mode has a different function.
1 2
Viewing mode
Erase EEPROM mode (to erase EEPROM software)
a. Press reset button after switching.
b. Wait for screen displays "Erased. Power off"
Loader mode (for software upgrade)
a. Press reset button after switching.
b. OSD shows "Loader Invoke mode"
c. Set switch 1 to ON.
d. Update software by "Winupload".
Press reset to cycle through the video mode. Each time the reset button is pressed, the
video mode will change from PAL -> NTSC -> SECAM and back to PAL.
