Tél.+33 1 34 34 11 55 www.myhexagone.com 9
5 –Your warrantee
These conditions correspond to the French laws in force at the date of printing.
Manufacturers Conditions
A - Conditions
We guarantee that all materials are technically sound and free of defects of materials and manufacture and
that they are consistent with the state of the art and techniques at the time of marketing. Subsequent
technological modifications applied to our products due to technological progress cannot give rise to any
intervention on our part.
The warranty is limited to the repair or replacement of the equipment if a compliance defect is recognised.
The choice of the solution is at our discretion given that any application of the warranty could not exceed the
resulting direct prejudice suffered and cannot lead to unreasonable costs to the dealer or the manufacturer.
The warranty is cancelled as of right if the equipment has been worked upon by a third party who does not
belong to our workshop or by a repairer not certified by us or if modifications have been applied without our
written consent. The warranty is also cancelled as of right if the operation and maintenance does not comply
with the operation manual supplied with the equipment at purchase time.
All legal warranties as described in section 1641 of the Civil Code are applicable. Any text that could become
Law after the printing of the present guarantee and whose terms would be in the order of public interest would
automatically apply even if they are different from the present conditions.
The following are excluded from the warranty:
The replacement of components liable to wear and tear such as Tracks, Brushes, Belts, Filter Bags.
Electrical faults caused by storm or bad electrical connections.
Damage due to impact.
Any breakdown related or non-related to replacement with non-genuine parts.
Problems arising as a result of non-compliance to the instructions of the operation manual.
Under no circumstances can the repair or replacement done under guarantee result in the extension or
renewal of the duration of the guarantee of the equipment.
B –Purpose Of The Warranty
The warranty period is limited by 2 years or 1200 hours of work (first period achieved stop the warranty. To
ensure good working conditions we advice you to ask for an overhaul every 1000 hours for the pump and
every 2000 hours for the driving motors.Every pump without any overhaul after 1000 hours of work will not be
covered by the warranty anymore by he manufacturer.
During the warranty period defined above, any component that is recognized to be faulty will be repaired or
replaced by a new component or one that is in good operating condition.
The transport and labor costs will be the responsibility of the user. In the case of a return to our workshop, the
two-way transport costs will be the responsibility of the user and the labor costs will be the responsibility of the
manufacturer. The immobilization and lost operation time of the equipment due to repairs cannot give rise to
any benefit. In any case, the legal warranty of the seller continues to apply under section 4 of Decree n° 78-
464 of the 24th of March 1978.
C –Transport Damage
The equipment is transported at the risk of the consignee. The latter is responsible for verifying that the
equipment is in perfect condition before accepting delivery. We cannot be held responsible in this matter.
D - Compliance
This equipment has been designed and manufactured according to the following standards:
• NF C15-100 - Very low power supply for security
• NF EN 50 081-1 and NF EN50 082-1st June 1992 Electromagnetic compatibility –Generic standard for
emission / immunity - Part I : residential, commercial and light industry
• NF EN 50 082-1st June 1992
Additional information relative to CE certification: the swimming pool cleaning Robot is certified CE
according to the following guidelines:
• C.E.M. 89/336/CEE and 92/31/CEE
• Low voltage 73/23/CEE with which the equipment is compliant.
