Herutu WCP-LR16U Manual de usuario

Simple Contact Wireless Transfer Unit

WCP-LR16U

INSTRUCTION MANUAL V1.00

Please use this operation manual correctly on reading well.

Please keep it carefully to be able to read immediately, when required.

 
Table of Contents 
1．Outline...................................................................................................................................................................1 
2．Body andAccessories...........................................................................................................................................2 
2-1．WCP-LR16U...................................................................................................................................................2 
2-2．Options...........................................................................................................................................................2 
3．Safety Precautions (Be Sure to Read This)..........................................................................................................3 
4．Names and functions of each part........................................................................................................................6 
4-1．Names of each part........................................................................................................................................6 
4-2．About LED for monitoring...............................................................................................................................7 
5．How to use............................................................................................................................................................8 
5-1．Use procedure................................................................................................................................................8 
6．Functions and settings........................................................................................................................................10 
6-1．Configuration switch.....................................................................................................................................10 
6-1-1．Communication channel settings..........................................................................................................11 
6-1-2．Set number settings ..............................................................................................................................11 
6-1-3．Terminal input/output settings ...............................................................................................................12 
6-1-4．Setting the periodic transmission time..................................................................................................13 
6-1-5．Setting the input judgment time.............................................................................................................14 
6-1-6．Setting the communication mode..........................................................................................................15 
6-1-7．Startup of the Communication environment checking function............................................................16 
7．Installation and connection .................................................................................................................................17 
7-1．Installation....................................................................................................................................................17 
7-2．Installation location.......................................................................................................................................18 
7-3．Connection to the terminal block..................................................................................................................19 
7-3-1．Power input terminal block....................................................................................................................19 
7-3-2．Error output terminal block....................................................................................................................19 
7-3-3．I/O terminals..........................................................................................................................................20 
7-3-4．Connection cable...................................................................................................................................22 
7-4．Communication environment checking function..........................................................................................23 
8．Communication...................................................................................................................................................24 
8-1．Communication type ....................................................................................................................................24 
8-2．communication error output.........................................................................................................................25 
9．Notes for use.......................................................................................................................................................26 
9-1．Response time .............................................................................................................................................26 
9-2．Selecting communication channel ...............................................................................................................27 
10．Specification......................................................................................................................................................28 
11．Dimensions Drawing .........................................................................................................................................29 
12．Troubleshooting.................................................................................................................................................31 
13．After service and Warranty................................................................................................................................33 
 
 

1．Outline

WCP-LR16U is a simple contact wireless transfer unit using the 920 MHz band wireless communication. The

device wirelessly transfers contact signals from external devices. Use of the device enables wireless transfer of

up to 16 contacts between manufacturing facilities and industrial equipment that are located far from each other.

Wireless communication with 920 MHz band LoRa modulation achieves reliable communication.

The device is configured to be used in pairs(1:1).

◆The configuration is 1:1.

◆With 920 MHz band LoRa modulation, highly reliable bi-directional communication is achieved.

◆Operation settings can be easily performed with the configuration switches.

◆Selectable from 15 wireless channels.

◆The communication mode can be selected from “Standard mode” and “Long- range mode”.

◆The transfer method of contacts can be selected from “uni-directional 16 contacts” and

“bi-directional 8 contacts”.

◆You can check the wireless communication status and terminal input/output status with the LED for

Monitoring.

◆When using the terminals in the input setting, you can switch between “Voltage contact input” and

“Non-voltage contact input”.

◆You can determine the installation location using “Communication environment checking function” that

displays the communication environment between the paired units in 5 levels.

◆When a wireless communication error occurs, you will be notified by lighting of the LED for Error Indication

and an error output.

◆The power supply is DC24V±10％.

The device can be used withAC100-240V by using the optional AC adapter.

uni-directional 16 contacts

bi-directional 8 contacts

◆In Standard mode, “communication distance of approx. 300m(328yd) indoors / approx.1,000m (1,094 yd) in

line of sight”, and in Long-range mode, the communication distance can be extended to “communication

distance of approx. 2,000m (2.187 yd) in line of sight”. (※depending on usage conditions)

As demo units are available, it is recommended to perform a communication test, etc. in advance.

2．Body and Accessories

2-1．WCP-LR16U

2-2．Options

・Antenna mounting kit（cable 3m）SMAR3-3D2V

The kit is a set of a bracket and coaxial cable. The supplied dipole antenna can be installed away from the

main unit.

・AC Adapter ADB24050-F （With connection cable）

WCP-LR16U body ×1

Cable 1.5m

Connection cable 1.8m

Dipole antenna ×1

(MEGWX-467XRSBX-920)

Insertion bridge ×2

※Shipped mounted on "A-B" terminal

block.端子台(A-B)に取り付けて出荷

Bracket

Coaxial cable

3.0m

Examples of Use

3．Safety Precautions (Be Sure to Read This)

This section describes the matters to be observed in order to prevent harm to the users and other persons

and damages to the property.

■The following marks and displays classify and describe the extent of harm and damage caused by failing

to observe the display content and using this product wrongly.

This display column shows "a failure to do observe it could result in only the

personal injury or property damage".

■Handling this product

●This product is the wireless communication equipment made of precision parts. Do not

disassemble or modify it. Or the accident or fault may occur.

■Use and storage environment

●DO NOT USE OR STORE the product in the following places to prevent defects, malfunction,

deterioration, fire, and electric shock:

・Do not use and store it in places exposed to direct sunlight,

・Do not use and store it in places where liquids, foreign substances, corrosive gases or

combustible gases can enter the product,

・Do not use and store it in places with high humidity or where there is abundant oil smoke,

dust, sand, etc. ,

・Do not use it in an unstable place such as a wobbling table or an inclined plane,

・Do not use it in a place with vibration.

This display column shows "a failure to do observe it could result in death or

serious personal injury".

■Handling this product

●Do not use this product for application that requires the extremely high reliability affecting the

human life.

●Do not use this product in the area which the radio wave reaches or not.

! Warning

! Caution

■Handling the AC adapter

Be sure to observe the followings in order to prevent the accidents such as heat generation, damage, or

ignition of AC adapter.

●Do not place the AC adapter close to fire or insert them into fire. Or they may be burst and

ignited, resulting in the accident.

●Use the AC adapter and main body only at the specified power supply voltage in order to

prevent burst and ignition accidents.

●Do not use main body at the location where they easily get wet. Or the accidents including heat

generation, ignition, or electric shock and faults may occur.

●Do not touch main body, power cord, and power supply terminal base with wet hands. Or the

accident such as an electric shock may occur.

●Do not damage the power cord of the AC adapter. Short-circuit or heat generation may cause

fire or electric shock.

●Do not use the power supply terminal base with dusts attached. Short-circuit or heat

generation may cause fire or electric shock.

●Do not give a strong shock to the AC adapter.

Or the accident or fault may occur.

●If you find a deformation in the AC adapter, do not use it.

Or the accident or fault may occur.

●Do not charge the main body at the location where the flammable gas is generated.

Or the ignition accident may occur.

●Never disassemble main body. Or the accident or fault may occur.

■If a problem occurs during use

Remove the power plug from the outlet because it may cause fire and electric shock. Request the dealer

or our company to repair it.

●When smoke comes or there is a strange smell, immediately stop usage and remove the

power plug from the outlet because it may cause fire and electric shock. Request the dealer or

our company to repair it.

●Do not use this product when its AC adapter cable or the power switch of the main unit is

damaged.

Using the cord damaged continuously may cause fire or electric shock.

■Notes on the Radio Law

〇Disassembly or modification of the device having an approva l is prohibited by the law.

〇Do not use this product for the ap plication that may cause harm to human body or damage to other

devices and equipment. Do not use this product near the devices th at may malfunction due to radio waves

emitted from this product.

〇This product is available only in the U.S.Aand Cananda. It is not available in other countries or regions.

The wireless module “HRF-SG01-US” incorporated in the unit obtains FCC (Federal Communications

Commission), CRF47 Telecommunication, Part15.212 certification of Modular Transmitter, and Part15 subpart

C Module certification of “International Radiators”, based on the above.

In addition, the wireless module “HRF-SG01-US” is approved for use in Canada according to Industry Cananda

(IC) radio standard specification (RSS) RSS-210 and RSS-Gen.

■FCC/IC Warning

Information about FCC Standard.

FCC CAUTION

Change or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interface, and (2) This device must accept any interface

received, including interface that may cause undesired operation:

Information about FCC Standard and IC standard.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)

this device must accept any interference, including interference that may cause undesired operation of

the device.

Le présent appareil est conforme aux la partie 15des règles de la FCC et CNR d'Industrie Canada

applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

4．Names and functions of each part

4-1．Names of each part

No.

Name

Description

①

Power switch

Turns the power supply of the main unit ON/OFF.

②

Power input terminal block

Inputs operating power supply (DC24V±10%).

③

Error output terminal block

Outputs signals to external devices when a communicator error occurs.

④

Configuration switch

Used to configure the wireless communication channels, set No. and

various operation settings.

⑤

LED for Monitoring

Displays the status of the power supply, communication error, wireless

transmission /reception, and contact input/output.

⑥

Antenna terminal

Connect the supplied antenna or the coaxial cable in the optional

antenna mounting kit. Its shape is an SMA reverse connector.

⑦

I/O terminal block(1-8)

A terminal block for contact input/output of the terminals 1–8.

⑧

Input specification switching

terminal block(1-8)

A terminal block for switching the contact input specifications of the

terminals 1–8 (Voltage / Non-voltage).

⑨

I/O terminal block(9-16)

A terminal block for contact input/output of the terminals 9–16.

⑩

Input specification switching

terminal block(9-16)

A terminal block for switching the contact input specifications of the

terminals 9–16 (Voltage / Non-voltage).

⑪

Mounting hole

A mounting hole used to fix the main unit. (4-Φ4.5)

⑫

USB connector

It is a USB connector for maintenance. Customers must not connect this

connector.

②Power input terminal block

①Power switch

③Error output terminal block

④Configuration switch

⑤LED for Monitoring

⑥Antenna terminal

⑦I/O terminal block(1-8)

⑨I/O terminal block(9-16)

⑧Input specification

switching terminal block(1-8)

⑩Input specification

switching terminal block(9-16)

⑪Mounting hole ×4

⑫USB connector

4-2．About LED for monitoring

The device has an LED for Monitoring that indicates the operation status. The indication of each LED for

Monitoring is listed in the table below.

LED

Name

Description

POWER

LED for power indication

Lights up in green when the power is turned ON.

ERROR

LED for Communication Error

Indication

Lights up in red when a wireless communication error with the

paired unit occurs. This LED is synchronized with the error

output.

TX/RX

LED for Wireless

Communication Monitoring

Indicates the wireless communication status. Lights up in red

during transmission and lights up in green during reception.

IN/OUT 1-8

LED for Monitoring I / O 1-8

Indicates the input/output status of the I/O terminals 1–8.

Setting the input terminals:

Lights up in green during input of the terminals 1–8.

Setting the output terminals:

Lights up in red during output of the terminals 1–8.

IN/OUT 9-16

LED for Monitoring I / O 9-16

Indicates the input/output status of the I/O terminals 9–16.

Setting the input terminals:

Lights up in green during input of the terminals 9–16.

Setting the output terminals:

Lights up in red during output of the terminals 9–16.

【LED for Monitoring】

Tabla de contenidos

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario