HeroCamper K3600-50/EU Instrucciones de montaje
K3600-50/EU
Aircondition
INSTALLATION GUIDE AND USER MANUAL
Please read all instructions carefully before using the unit and keep instructions for future reference.
1
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
1. Introduction
2. Instllation guide
3. Operation instructions
4. Specifications parameters
5. Product maintenance
6. Troubleshooting guide
7. Warranty
2
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Introduction
3
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Exploded Parts List
Key components:
1. Air-conditioner main unit ×1
2. Reinforced roof support ×1
3. Mounting frame ×1
4. Plenum unit ×1
Fastener components:
5. M8 x 110 mm bolts ×4
6. Fixing washers ×4
7. Round washers ×4
8. Spring washers x4
9. Screws for plenum ×4
1
2
4
3
5
6
7
8
9
4
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Operations
K3600-50 creates a comfortable environment for a recreational vehicle or
caravan.
It is recommended the user should consult caravan manufacturer to
understand total heat-load, as well to choose a suitable air-conditioner,
some tips to reduce heat-load and improve performance:
•Park the caravan at a shaded place to avoid direct sunshine
exposure, close all the doors, skylights and windows, draw
the curtains and open the sunshade.
•Turn off any unnecessary electrical appliances to reduce the
heat-load.
•Turn off any unnecessary electrical appliances to reduce the
heat-load.
•Set suitable temperature by remote control to avoid frequent
start and stop.
5
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Condensation
Condensation usually happens in areas where the air humidity is
comparatively high and when warm moist air within the caravan meets
with the cold air from the outlet. In this case, please pay attention to the
following measures:
•Close all the doors, skylights, windows and draw the curtains
to decrease any warm moist air from entering.
•In the operation of the air-conditioner, condensate (water) will
be produced on the roof. Please select High Fan mode to
increase circulation to decrease condensation degree.
Please note that damage caused by the condensate
water is not covered by warranty.
6
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Choosing 230V power and using generator
K3600-50 requires a stabile 230V AC power source, and may require a
generator in some remote circumstance.
Requirements for inverter generator include: efficient power source;
stable current; output sine wave, which shall meet the requirements of the
compressor. The user should consult with the generator supplier for their
recommendations.
Please note that damage caused by using a generator is
not covered by warranty
7
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Installation requirements
•The RV or caravan roof and cutout needs to be able to support the
air-conditioners weight (42kg).
•Minimum thickness of roof: ≥23mm; maximum thickness of roof:
≤55mm.
Installation instructions
•Read and understand this manual thoroughly before installation.
•Abide by the wiring rules in theinstallation.
•Do not add other parts or restructure the product during the
installation.
•The installers shall be qualified refrigeration technicians.
•Consult with dealer in the case of unusual applications or
installation conditions that are not specifically covered by this
manual.
8
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Preparation
•The main unit should be
installed in the center of roof,
it is recommended to have a
min 100mm space around the
top unit.
•Before installing please verify
there is suitable space in the
ceiling to accept the plenum.
•The installation position
(400x400mm) should avoid
skylight, solar panels, roof
vents, heaters, lights and all
electrical connections.
9
#HeroCamper™ –Lammefjordsvej 5 –6715 Esbjerg N –Denmark
Phone +45 7022 5840 –sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Preparation (continued)
•Please check with your caravan manufacturer to confirm the
roof can bear the weight of the air-conditioner and maintain a
level surface to avoid accumulating condensate/water.
•Please consult with your caravan manufacturer for the best
solution if there is a requirement to cut a mounting hole if
provision has not been made for an air conditioner.
•Cut a 400 x 400 hole and reinforce with the appropriate sized
timber frame (see pic). This is to ensure the roof will not crush
on installation and air does not enter the ceiling space.
•In some instances a separate metal frame may be required to
reinforce the roof structure. Consult with your caravan
manufacturer/installer to reach a suitable solution.
Tabla de contenidos
Idiomas:
Otros manuales de Acondicionador de aire de HeroCamper
