Hercules Prophetview 920 Pro Manual de usuario
© 2003 Guillemot Corporation S.A., rue du Chêne Héleuc, 56910 Carentoir, France (414 196 758 R.C.S. Rennes)
FRANÇAIS ESPAÑOLITALIANO PORTUGUÊSNEDERLAND ENGLISHDEUTSCH
FRANÇAIS ESPAÑOLITALIANO PORTUGUÊSNEDERLAND ENGLISHDEUTSCH
CONTENTS
1. FEATURES ........................................................................................................................2
2. RECOMMENDED USE ...................................................................................................... 3
3. CONNECTING YOUR PROPHETVIEW 920 PRO TO A PC............................................. 4
4. DRIVER INSTALLATION................................................................................................... 5
4.1. Driver installation for Windows 98............................................................................... 5
4.2. Driver installation for Windows Millennium ................................................................. 5
4.3. Driver installation for Windows 2000........................................................................... 6
4.4. Driver installation for Windows XP.............................................................................. 7
5. OSD MENU FUNCTIONS .................................................................................................. 8
5.1. OSD buttons................................................................................................................ 8
5.2. Auto-adjust.................................................................................................................. 8
5.3. Brightness setting ....................................................................................................... 8
5.4. Main menu .................................................................................................................. 9
6. HARDWARE OPTIONS................................................................................................... 11
6.1. Anti-theft device ........................................................................................................ 11
6.2. Wall mounting ........................................................................................................... 11
7. TECHNICAL SPECIFICATIONS...................................................................................... 12
8. TROUBLESHOOTING ..................................................................................................... 13
9. TECHNICAL SUPPORT .................................................................................................. 14
9.1. Warranty information................................................................................................. 14
9.2. Save time by registering your product online!........................................................... 14
2/16 – User Manual
1. FEATURES
The HERCULES Prophetview 920 Pro is a high quality, 17-inch TFT-LCD (Thin Film Transistor –
Liquid Crystal Display) monitor that works in conjunction with VGA graphics boards.
Your Prophetview 920 Pro offers a large display area and is suitable for use as a 19-inch class
monitor, at a recommended resolution of 1280x1024 pixels.
Distortion-free and unsusceptible to electromagnetic interference, the Prophetview 920 Pro’s
sharp, lifelike picture, wide viewing angle and space-saving design make it the ultimate monitor
for home or business users!
!TFT-LCD monitor
The Prophetview 920 Pro’s sleek 17-inch LCD panel (equivalent to a 19-inch CRT monitor) takes
up very little space on your desktop, leaving more room available for other peripheral devices.
Desk space can now be used more efficiently than ever, thanks to the panel’s impressive depth of
only 28mm!
!Plug and Play compatible
Windows will automatically install the drivers for your monitor.Your Prophetview 920 Pro conforms
to the VESA (Video Electronics Standards Association) and DDC1/2B standards. The picture
adjustment function allows the image quality to be adjusted to match the input signal.
!Low power consumption
Your Prophetview 920 Pro features very low power consumption (<35W in power on mode, <4W
in standby mode) and auto power switch (90~264V).
!Easy-to-use On-Screen Display (OSD) menu
Your monitor’s display is easily configurable using the OSD menu and its 4-button system. You
may either use the auto-adjust function or manually adjust the advanced settings.
!Environmentally friendly
As the Prophetview 920 Pro is TCO95 compliant, power consumption can be reduced by using
your monitor in combination with a computer that conforms to the VESA DPMS (Display Power
Management Signaling) standard.
Mode Power indicator Power consumption
Power on Green <35W
Standby Amber <4W
Deep sleep No light <4W
FRANÇAIS ESPAÑOLITALIANO PORTUGUÊSNEDERLAND ENGLISHDEUTSCH
User Manual – 3/16
2. RECOMMENDED USE
For optimum performance, please note the following when setting up and using your Prophetview
920 Pro:
!Do not open up your Prophetview 920 Pro. Opening or removing the cover may expose you
to dangerous shock hazards or other risks. Warning: warranty is void if the monitor has
been opened.
!Unplug the monitor’s power cord and disconnect it from your computer before cleaning. Do
not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
!Avoid using your Prophetview 920 Pro in extreme heat or humidity, as this may cause color
loss or damage.
!Place your Prophetview 920 Pro on a flat surface to prevent it from falling.
!Install your Prophetview 920 Pro in a well-ventilated room, and do not cover the ventilation
openings.
!Keep all liquids and chemicals away from your Prophetview 920 Pro.
!Switch off both your Prophetview 920 Pro and your computer before connecting or
disconnecting the VGA cable.
!To protect your Prophetview 920 Pro during electrical storms, disconnect it from your
computer and unplug its power cord. This will prevent it from being damaged by lightning or
power surges.
!Handle your Prophetview 920 Pro with care when moving it. Make sure that you keep hold
of all packaging materials, in case you need to transport your Prophetview 920 Pro in the
future.
4/16 – User Manual
3. CONNECTING YOUR PROPHETVIEW 920 PRO TO A PC
Remove your Prophetview 920 Pro from its packaging along with the various different elements
required for installation:
TFT-LCD monitor AC power adapter Power cord
Installation CD-ROM
- Switch off your computer.
- You may also need to disconnect your previous monitor from the system.
- Connect the VGA cable to the VGA output on your graphics
board.
- Connect the AC adapter cable to the power terminal at the
back of the monitor base.
- Connect the power cord to the AC adapter.
- Plug in the monitor’s power cord.
- Switch on your computer and monitor (for the latter, by
pressing the button).
Your Prophetview 920 Pro is now ready for use.
FRANÇAIS ESPAÑOLITALIANO PORTUGUÊSNEDERLAND ENGLISHDEUTSCH
User Manual – 5/16
4. DRIVER INSTALLATION
4.1. Driver installation for Windows 98
Windows will display an Add New Hardware Wizard dialog box informing you that the system has found a
Plug and Play Monitor.
- Insert the installation CD-ROM into your CD-ROM drive.
- Click on Next.
The wizard will suggest a Search for the best driver for your
device. (Recommended).
- Click on Next.
The wizard will ask you for the path of the driver.
- Enable the CD-ROM drive option.
- Click on Next.
Windows will inform you that it has detected other compatible
drivers.
- Click on Next.
The wizard will then display the name of your monitor.
- Click on Next to start the driver installation.
- Click on Finish to complete the setup.
4.2. Driver installation for Windows Millennium
Windows will display an Add New Hardware Wizard dialog
box informing you that the system has found a Plug and Play
Monitor. The wizard will suggest an Automatic search for a
better driver (Recommended).
- Insert the installation CD-ROM into your CD-ROM drive.
- Click on Next.
The Select Other Driver dialog box appears.
- Click on OK.
- Click on Finish to complete the setup.
6/16 – User Manual
4.3. Driver installation for Windows 2000
Windows 2000 uses default drivers for your monitor. You must therefore replace these standard
drivers with Hercules drivers.
- Click on Start/Settings/Control Panel.
- Double-click on the System icon.
- Select the Hardware tab.
- Click on Device Manager....
- Click on the +sign to the left of Monitors.
- Double-click on Plug and Play Monitor.
- Select the Driver tab.
- Click on Update Driver....
- Click on Next.
The wizard will suggest a Search for a suitable driver for my
device (recommended).
- Click on Next.
The wizard will then prompt you to designate an optional
search location.
- Enable the CD-ROM drives option.
- Insert the installation CD-ROM into your CD-ROM drive.
If the Prophetview 920 Pro installation menu
appears:
- Close it by clicking on .
- Click on Next.
Windows will then specify the path and name of the folder where the drivers are located.
- Click on Next to continue the driver installation.
The Digital Signature Not Found dialog box appears.
- Click on Yes.
- Click on Finish to complete the setup.
Tabla de contenidos
