Heptagon Systems HQ-Box Manual de usuario
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
HQ-Box User Manual
Rev 1.05 20180510
Heptagon S Y S T E M S HQ-Box user’s manual 1
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
Table of Contents
1. Introduction......................................................................................................................................3
2. Safety instructions............................................................................................................................4
2.1. Caution – Hot surface................................................................................................................
2.2. Recycling and battery replacement............................................................................................
2.3. Electrostatic Sensitive device....................................................................................................
3. Electromagnetic Compatibility.........................................................................................................
4. Safety compliance............................................................................................................................6
. Package contents..............................................................................................................................6
6. Product description...........................................................................................................................7
6.1. Front panel.................................................................................................................................8
6.2. The HQ-Box motherboard (HB-BDE)......................................................................................9
6.3. Connectors and sockets...........................................................................................................10
6.4. LED display.............................................................................................................................1
6. . DRAM Memory......................................................................................................................16
6.6. On board storage and I/O expansion.......................................................................................17
7. Assembly instructions.....................................................................................................................19
7.1. 2. ” Hard disk and SSD mounting.........................................................................................19
7.2. Add-On card insertion............................................................................................................21
8. Motherboard connector drawing....................................................................................................22
9. External dimensions.......................................................................................................................23
10. Copyright Notice..........................................................................................................................24
Heptagon S Y S T E M S HQ-Box user’s manual 2
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
1. Introduction
The HQ-Box is a family of highly flexible embedded servers. The HQ-Box comes in two types of enclosures
“Compact” and “Extended”. This manual refers to both types.
The Compact version has a single extension slot which can accommodate either a PCIe add-on card, or two U.2
2. ” drives (either PCIe or SATA).
The Extended version has three extension slots allowing up to 3c PCIe Add-on cards, 4x U.2 2. drive slots, and
many combinations of PCIe slots and U2. Drives.
The manual is divided into the following sections
•Safety and standards – please read carefully
•Product description – technical details and the architecture of the product
•Assembly instructions for adding and removing optional parts
•Mechanical drawing
Heptagon systems is constantly improving it’s products and adding new features. The user is advised to check the
company web site for the latest revision of this document.
Please refer to our Quick Selection Guide (QSG) document available for download from our web site.
Heptagon S Y S T E M S HQ-Box user’s manual 3
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
2. Safety instructions
There are not enough words to describe the importance of safety. Please invest the time to read the chapter below,
compiled for your own safety.
Disclaimer: Failure to follow the safety instructions can lead to injuries and/or damage of property. Heptagon
Systems is not liable should safety instructions not be followed. Please refer to the Heptagon Systems Sales and
Warranty terms and conditions for further information.
This product was designed and built in accordance with the safety requirements of low voltage equipment.
This product was built and tested prior to shipment for operational and safe use.
In order to preserve this product as operational and safe, the following guidelines must be kept:
•The product must always operate within the operation and storage conditions described in this manual.
Conditions include:
◦Supply voltage
◦Temperature
◦Humidity
◦Shock and vibration
•Installation and mounting instruction must be followed to ensure appropriate air circulation.
•Power supply to the product must meet local safety regulations for electrical installation. Electricity
infrastructure connection should be prepared by people who are qualified for the task by the local
authority. Proper grounding for an AC power supply is a must. Use only safety approved PS according to
IEC/EN 609 0-1 with rated voltage of 13.6 to 24VDC and a rated power of 200W max
•As the product weight is above 2Kg, exercise caution when moving and installing. Failure to properly
mount can cause incidental falls and subsequent injuries.
•Before servicing the product, ensure it is has been disconnected from all power sources. Power it off
safely then disconnect the power cable.
•Use anti-static equipment before opening and while servicing the product. Electro static discharge can
destroy or damage electronic equipment. Take extra caution when using add-on cards to prevent damage.
•All add-on cards should comply with add-on card specifications. The total amount of add-on cards and
disks used should not pass the power budget prescribed for them or exceed the maximum supply current
of the product.
•Extensions or add-ons which require a service such as a filter or fan, should be maintained in accordance
with their maintenance requirements.
•Stop using the product and disconnect it from its power source if it is malfunctioning or showing signs of
damage. The product should be marked as faulty to prevent others from using it.
•Service to the product should be made by a Heptagon Systems qualified service. Opening of the product
should be restricted for the purpose of replacing an add-on card, a storage device or a backup battery.
Heptagon S Y S T E M S HQ-Box user’s manual 4
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
2.1. Caution – Hot surface
The left side (as seen from the panel) of the HQ-Box is a hot surface
2.2. Recycling and battery replacement
If the product contains a battery:
•Replace only with the correct type of battery as advised in the product manual. Failure to do so may result
in a fire and/or explosion.
•Please recycle the battery as instructed by local authorities. Do not dispose in an ordinary rubbish bin.
Recycling:
All Heptagon Systems packaging materials are made from recyclable products.
Please consult your local Heptagon Systems representative for recycling of the product.
2.3. Electrostatic Sensitive device
The internals of this product may contain static sensitive devices. Appropriate anti-static
handling procedures should be used when transporting and maintaining this product. The
following should be noted:
•Make sure to be in an electrostatic safe environment when opening the product for
service.
•Use a personal electrostatic strap before starting the service procedure.
•All electronic boards should be stored in ESD protective shields.
3. Electromagnetic Compatibility
This product is made for industrial use as classified by EMC directive (Type B device).
Europe (EU): It was tested and complies with
EN 032: 2012 + AC(13), Class B
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 024: 2010
USA: It was tested and complies with FCC 47CFR part 1 : 201 , subpart B.
Australia and New Zealand (AU and NZ): It was tested and complies with AS/NZS CISPR 32: 201 , Class B
The HQ-Box EMC compliance was done with cables of 3 meter maximum length. HQ-Box is not intended to
connect to cables longer than 3 m.
Heptagon S Y S T E M S HQ-Box user’s manual
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
. Safety compliance
The device was tested and passed the following EU and AS/NZS directive safety tests:
EN 609 0-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
IEC 609 0-1:200 (Second Edition)+Am1:2009+Am2:2013
AS/NZS 609 0.1: 201
5. Package contents
•HQ-Box, in accordance to the ordered configuration
•Packing list
•Optional accessories
Heptagon S Y S T E M S HQ-Box user’s manual 6
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
6. Product description
The HQ-Box server series offers a flexible and modular architecture, enabling full utilization of the Xeon-D SOC.
The HQ-Box modularity enables flexibility in all major implementation junctions, accurately tailoring the HQ-
Box to the exact needs of the client.
The HQ-Box was designed for many years of flawless service. For example, it uses only ceramic capacitors
(100% ceramic) to eliminate MTBF issues of tantalum and organic capacitors.
Heptagon S Y S T E M S HQ-Box user’s manual 7
Motherboard: HB-BDE
M.2 E
M.2 M
PCIe 3.0 x 16 Ex ansion slot
4x USB3.0
HQ-Box Modularity Diagram
DC
ower 13.6-24 VDC
2x 1G ETH
AUDIO
SPKR
MIC
2x RS-232
(Tx/Rx)
Front
Panel
SIM
M.2 B
Mini
PCIe
SIM
Ant.
Ant.
PCIe SLOT x8
EX1E82U U.2 NVMe / 2.5”
U.2 NVMe / 2.5”
PCIe SLOT x8
EX1E82E4 PCIe SLOT x4
PCIe SLOT x4
U.2 NVMe / 2.5”
EX4U
U.2 NVMe / 2.5”
U.2 NVMe / 2.5”
U.2 NVMe / 2.5”
Select one exansion module (or suggest custom..)
BMC:
HX-A24
VGA
1GETH
RS-232/485
RS-232/485
VGA:
HX-A14
VGA RS-232/485
RS-232/485
BMC Ex ansion slot
HX-A24 or HX-A14
HX-E10
SFP+
SFP+
HX-E10T
RJ-45
RJ-45
10G ETH ex ansion slot
HX-E10 or HX-E10T
(Or Custom)
PCIe 3.0 x 4
Ex ansion slot
PX-1M
1x M.2 NVMe SSD
Isolated Digital I/O
Ex ansion slot
HX-DIO
8x D.In, 8x D.Out
Flat-20
U.2 NVMe / 2.5”
EX2U U.2 NVMe / 2.5”
M.2 M NVMe
PCIe SLOT x16
EX1EF O tional: PX-4M
4x M.2 NVMe SSD
M.2 M SATA
PCIe SLOT x8
EX2E8
PCIe SLOT x8
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
6.1. Front panel
The Extended version is identical albeit the larger slot area which offers 3 slots for various combinations of PCIe
3.0 add-on card slots and U.2 drive bays.
Heptagon S Y S T E M S HQ-Box user’s manual 8
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
6.2. The HQ-Box motherboard (HB-BDE)
The HQ-Box motherboard, HB-BDE, features the following:
•Xeon-D 1 00 SOC. All series members are supported, from 2 W to 6 W.
•128GB DDR4 total memory, 4x DIMM288 with ECC for improved reliability.
•4x ports of USB3.0
•2x port of 1Gb Ethernet
•3x M.2 expansion sockets + Mini PCIe socket
The HB-BDE motherboard carries 4 expansion sockets with various functionality:
•PCIe 3.0 x16 slot which accepts expansion modules. Heptagon Systems currently offers 6 expansion
modules. All Add-on cards can be of Full-Height Half-Length (FHHL) form factor.
•10G Ethernet slot default is dual SFP+. Dual RJ4 1 (10G Base-T) option also exists.
•Board management Controller (BMC) slot to host an Aspeed AST2400 management controller, HX-A24.
Projects which do not require the remote management capabilities of the HX-A24 can replace it with the
VGA-only HX-A14 module.
•Digital I/O slot. The current HX-DIO supports HV isolated 8in+8Out. The I/O slot uses LPC and
SMBUS, enabling future client specific custom modules.
•PCIe 3.0 x4 slot for internal HHHL add-on cards. This card has no I/O panel.
1 - 10G Base-T is available for applications with temperature controller environment.
Heptagon S Y S T E M S HQ-Box user’s manual 9
Heptagon S Y S T E M S
Heptagon Systems Pty Ltd.
Heptagon Systems EMEA Ltd.
6.3. Connectors and sockets
Panel connectors
Function onnector Description
Audio P12 Dual 3. mm Audio Jack.
Stereo out
Mono microphone
USB P9, P10 P9 - USB 3.0 ports 0 & 1
(directly from the SOC), Standard A-type
P10 - USB 3.0 ports 2 & 3
(through
a hub), Standard A-type
1GbE ETH P33,P34
P33 - ETH1
P34 - ETH2
Dual 1Gbe RJ4 with Green/Yellow leds.
Green – Link, Yellow - Activity
Digital I/O J1 / HX-DIO
2x10, 2. 4mm connector for flat cable. Pinout:
•IN[0:7], Digital inputs, signal between 4.9..24V is logic
high, 0..0. V is logic low. 2KV isolation.
•OUT[0:7], open drain up to 24VDC. 2KV isolation.
•+ V_ISO 0mA, + VDC isolated supply. 2KV
isolation.
•GND. Ground reference point to signal level.
Note: Digital I/O (HX-DIO) is an optional function.
Heptagon S Y S T E M S HQ-Box user’s manual 10
Otros manuales para HQ-Box
1
Tabla de contenidos
Otros manuales de Servidor de Heptagon Systems
