HEPER D-LIGHT L ML 4 Instrucciones de instalación y funcionamiento

1/3 2022-1 / 03/11/2022

Installation & Maintenance

Instructions

HEPER USA LLC

W227 N546 Westmound Drive Waukesha, 53186

Wisconsin, United States

+1 312 910 9740

[email protected]

D-LIGHT L ML 4 Module (LL2024.674-US)

21.5 lbs

https://heperlighting.com/us/ll2024.674-us/

2/3

3/3

English ( USA )

Safety

- The product must be installed in accordance with applicable

NEC standards by a qualified electrician familiar with the

installation of exterior lighting fixtures.

- The product must be operated under specified voltage at all

times.

- Do not install if parts are damaged.

- Power must be disconnected while installing or servicing to

avoid electrical shock.

- Failing to comply with warnings and installation steps in this

document might void warranty.

- Do not touch the light source.

- Make sure that temperature of the product is at a safe level before

touching.

- Do not allow cables to touch sharp edges of metal parts or other sharp

objects to avoid damage or abrasion.

- Check all of the cable connections including grounding before

powering the product.

- Check the proper grounding of the metal housing before powering the

product.

- Only use the product for its intended purposes.

- Do not use accessories not approved or recommended by

HEPER.

- Replace any broken/cracked protective surface with a new

one

- The external flexible cable or cord of this LED Module cannot be

replaced; if the cord is damaged, the module shall be destroyed.

- The light source of this LED Module is not replaceable; when the light

source reaches its end of life the whole Module shall be replaced.

- Ethr value of the module according to IEC TR 62778 Standard: 1280 lx

- The LED Module should be positioned so that prolonged staring into

one LED Module at a distance closer than 1,3 m is not expected.

- The maximum working voltage of basic insulation between the active

parts of the LED module and external metallic parts: 260 V.

Replacement of the light source

- Detach the AreaFlex (AFX) module as shown on the visual.

- Detach the MILESTONE (ML) module as shown on the visual.

Replacement of the control gear

- Unlock the clip to reach the driver location.

- The electrical connection automatically will be blocked when the cap is

opened. Make sure that the mechanism is locked which is on the side of

the cap.

Cleaning - Maintenance

- The product was designed and manufactured to operate for a long

period of time. To ensure maximum lifespan of the product, regular (i.e.

every six months) visual inspection and cleaning with a solvent-free

cleaner using a soft cloth is recommended.

- Do not clean or service while the product is power connected.

Disposal

- In accordance with EU Directive WEEE (Waste Electrical and

Electronic Equipment), luminaires must not be disposed of with

other household waste. At the end of their life, luminaires must

be taken to the appropriate local facility available for the

disposal or recycling of electronic products.

Wiring Color Codes

- Ground - GREEN

- Line - BLACK

- Neutral - WHITE

- Dim(+) - RED/PURPLE

- Dim (-) - GRAY/ORANGE

Disclaimer

- HEPER reserve the right to make technical and design changes.

Este manual sirve para los siguientes modelos

Otros manuales de Luz exterior de HEPER

HEPER

HEPER DOMINO ML EVO 3 Module Duo Instrucciones de instalación y funcionamiento

HEPER

HEPER NORMA S Instrucciones de instalación y funcionamiento

HEPER

HEPER LL2031.511-US Instrucciones de instalación y funcionamiento

HEPER

HEPER NORMA S Instrucciones de instalación y funcionamiento

HEPER

HEPER PUNTO S Ex Instrucciones de instalación y funcionamiento

HEPER

HEPER TURA 4x16 LED Instrucciones de instalación y funcionamiento

HEPER

HEPER DOMINO ML EVO 2 Module Duo Instrucciones de instalación y funcionamiento

HEPER

HEPER MINIMO 3x90 Instrucciones de instalación y funcionamiento

HEPER

HEPER PUNTO S W Instrucciones de instalación y funcionamiento

HEPER

HEPER DOMINO ML EVO 2 Instrucciones de instalación y funcionamiento

HEPER

HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LB6056.510-EN Instrucciones de instalación y funcionamiento

HEPER

HEPER DOGO EX Instrucciones de instalación y funcionamiento

HEPER

HEPER LB6052.509-US Instrucciones de instalación y funcionamiento

HEPER

HEPER HANDRA LH5007.595-US Instrucciones de instalación y funcionamiento

HEPER

HEPER ZEROX Dyno Instrucciones de instalación y funcionamiento

HEPER

HEPER NORMA Instrucciones de instalación y funcionamiento

HEPER

HEPER HANDRA Forward LH5006.595-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LF8035.523-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LIA Instrucciones de instalación y funcionamiento

HEPER

HEPER TROLI Instrucciones de instalación y funcionamiento

HEPER

HEPER ZEROX M Dyno Instrucciones de instalación y funcionamiento

HEPER

HEPER TILA S AFX 3 Module Instrucciones de instalación y funcionamiento

HEPER

HEPER TURA 2x16 LED Instrucciones de instalación y funcionamiento

Manuales populares de Luz exterior de otras marcas

Sealey

Sealey LED37 Manual de usuario

nordlux

nordlux VEJERS Guía del usuario

SImx

SImx ELITE LED LHTC637 Manual de usuario

GEV

GEV CAROLINE 10833 Manual de usuario

NEBO

NEBO NEB-LSP-0020 Manual de usuario

WE-EF

WE-EF PFL540 LED Manual de usuario

Lindby

Lindby 9949029 Manual de usuario

Maretti

Maretti VIBE S 14.6080.04.A Manual de usuario

BEGA

BEGA 84 253 Manual

LIGMAN

LIGMAN BAMBOO 3 Manual de usuario

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manual de usuario

urban ambiance

urban ambiance UQL1273 Manual de usuario

TotalPond

TotalPond 52238 Manual de usuario

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manual de usuario

LIGMAN

LIGMAN DE-20023 Manual de usuario

Spectroline

Spectroline MAXIMA ML-3500 Series Manual de usuario

Pro-Elec

Pro-Elec PELL0264 Manual de usuario