Hensel Expert Pro Manual de usuario

User manual // Expert / Integra Pro (Plus)

2 HENSEL-VISIT International GmbH

User manual // Expert / Integra Pro (Plus)

HENSEL-VISIT International GmbH 3

User manual // Expert / Integra Pro (Plus)

4 HENSEL-VISIT International GmbH

HENSEL-VISIT International GmbH

Robert-Bunsen-Str. 3

D-97076 Würzburg-Lengfeld

GERMANY

Tel.: +49 (0) 931 / 27881-0

Fax: +49 (0) 931 / 27881-50

E-Mail: [email protected]

Internet: http://www.hensel.de

User manual // Expert / Integra Pro (Plus)

HENSEL-VISIT International GmbH 5

1 Introduction

Dear photographer,

with buying a HENSEL flash system, you have

purchased powerful equipment of high quality.

So that you are able to work successfully and

productively with this system for many years, we are

giving you some advice on the use of this high tech

product. Only by observance of the information given

you secure your warranty, prevent damage and

prolong the life of the equipment.

HENSEL has taken great care to manufacture a

secure and high quality flash system under inclusion

and observance of all current regulations. Strict

quality controls secure our quality requirements even

in mass production. Please take your part in this and

treat the equipment with due care - your reward will

consist of excellent pictures.

If you should have any questions on the use, then

feel free to ask us at any time.



HENSEL-VISIT International GmbH

User manual date of revision: 2011-03

Technical data are subject to change. No guarantee for

misprints. The listed values are guide values and

should not be understood as binding in a legal sense.

The values can differ due to tolerances in used

components.

User manual // Expert / Integra Pro (Plus)

6 HENSEL-VISIT International GmbH

2 Table of contents

1 Introduction ............................................................5

2 Table of contents ...................................................6

3 General safety regulations...................................7-8

4 Standard delivery ...................................................9

5 Technical data......................................................10

6 Overview of controls.............................................11

7 Starting up............................................................12

Safety hints...................................................12-13

Acclimatizing......................................................13

Positioning.........................................................13

Fixing of the glass dome...............................13-14

Accessories .......................................................14

Mains connection...............................................15

Fuses.................................................................15

Overheating .......................................................15

8 Operation .............................................................16

Synchronization (Flash triggering).................16-17

Flash power control............................................17

Flash readiness..................................................17

APD system.......................................................17

Modeling lamp....................................................18

Flash counter................................................18-19

9 Radio control unit .................................................19

Strobe Wizard Plus .......................................19-22

FREEMASK transmitter (optional).................22-24

10 Maintenance........................................................24

Replacement of fuses ........................................24

Replacement of modeling lamp.....................24-25

Replacement of flash tube .................................25

Regular inspection.............................................26

Return to customer service ................................26

11 Disposal...............................................................26

12 Accessories ....................................................26-27

13 Customer service.................................................27

Declarations of Conformity..............................28-29

User manual // Expert / Integra Pro (Plus)

HENSEL-VISIT International GmbH 7

3 General safety regulations

Compact flash systems store electrical energy in

capacitors by applying high voltages. These form a

source of danger, which must be carefully excluded.

Besides general rules on handling electrical appliances,

the following safety measurements must be observed.

Therefore read and comply the safety hints (also see

paragraph Starting up) within the user manual before

turning the appliance on.

The present compact flash unit is meant for studio use

of professional photographers. Its task is to provide

electrical energy for HENSEL flash lighting.

The appliance may not be used for any other purpose

than that described above, especially not for other

electrical appliances.

Halogen lamps and flash tubes generate high

pressure during operation and can therefore burst.

For this reason it is a must to protect pilot and flash

light with the supplied, correctly installed HENSEL

protection glass dome. The glass dome is available

in different versions. The use of the glass dome

changes the color temperature.

Contact with the capacitor voltage is perilous, and

therefore opening of the case of Expert / Integra Pro

compact flash units and repairs must only be made

by authorized customer service.

Expert / Integra Pro compact flash units are

equipped with a user-replaceable flash tube.

Exchange of flash tube and modeling lamp must

only be per-formed with the appliance turned off,

unplugged from the mains and discharged.

Compact flashes must only be used on supply lines

(mains) with working protective conductor (earth

line).

Proper use

Improper use

User manual // Expert / Integra Pro (Plus)

8 HENSEL-VISIT International GmbH

Do not route cables across the studio floor if

possible, so that damage is excluded. If routing

across the studio floor cannot be omitted, then it

must be ensured that vehicles, ladders, etc. do not

damage cables. Damaged cables and cases must

be replaced immediately by customer service.

Ventilation slots of compact flashes must be kept

free during operation and sufficient air supply must

be ensured. Do not stick any objects into ventilation

slots or synchronization sockets. Do not deposit any

objects (tools, coffee cups, etc.) on the flash unit.

Flash systems must not be used in environments

with explosion hazard. Flammable materials, like

furnishing fabrics, paper, etc. must not be stored in

the immediate vicinity of compact flash units to

prevent fire hazards.

Compact flash units must be protected against humi-

dity and spray water.

Do not connect accessories from other manu-

facturers, even if they use the same or similar

connectors.

Flash units hanging from pantographs or ceiling 

must be doubly secured against falling down.

Do not flash into eyes at short distances (smaller

than 5 m) because this can lead to eye damage. Do

not look directly into the flash reflector; the flash

lamp could be triggered inadvertently.

Regularly air closed rooms to prevent build-up of

inadmissible ozone concentrations, which can occur

due to the use of high-powered flash systems.

During work in the studio generating much dust, the

appliance must be covered with suitable dust pro-

tection (not during operation).

User manual // Expert / Integra Pro (Plus)

HENSEL-VISIT International GmbH 9

4 Standard delivery

All units of the Expert / Integra Pro series come with:

Flash tube, single coated, user-replaceable

Protection glass dome, clear, uncoated

Tilting head with integrated umbrella holder

Cable set: power and sync. cord

Transportation protection cap

Integra Pro series are identical to Expert Pro series, but

with Multivoltage technology. Expert Pro series are only

for 230V operation.

Plus Versions of Expert / Integra Pro series offer

additional features like a built-in radio control receiver,

an illuminated front and a shiftable tilting head. In this

manual, these additional features are indicated by *.

User manual // Expert / Integra Pro (Plus)

10 HENSEL-VISIT International GmbH

5 Technical data**

Series

Expert / Integra Pro

Model type

250

500

1000

Values attained at:

230 V / 50 Hz

Rated energy:

250 J

500 J

1000 J

Aperture at 100 ASA, t 1/60,



f 45 7/10

f 64 7/10

f 90 7/10

Flash duration in sec. t 0,1:

t 0,5:

1/600

1/1800

1/500

1/600

1/2000

Recycling time 100% power:

In sec. 1/32 power:

1,2

0,3

2,2

0,5

2,1

0,45

Flash tube:

U-flash tube, for plug-in, single coated

Power adjustment:

1/32)

Modeling lamp max.:

300 W / G 6,35 halogen lamp

Modeling light adjustment:

FULL, OFF and PROP mode over 6 f

Features:

glass dome (clear, uncoated), plug-in coated flash

tube, fan, tilting head (fix and adjustable*, resp.),

umbrella holder, transportation protection cap,

built-in receiver*, illuminated front panel*

Fuse Expert Pro:

Integra Pro:

2 AF

4 AF

2 AF

4 AF

2 AF

4 AF

Mains Expert Pro:

connection Integra Pro:

230 V~

Multivoltage

230 V~

Multivoltage

230 V~

Multivoltage

Weight (kg):

2,75

2,87

3,90

Measurements in cm without

handle (L x B x H):

33 x 15 x 23

39,5 x 15 x 23

Code No. Expert Pro Plus):

Integra Pro (Plus):

Expert Pro Plus FREEMASK:

Integra Pro Plus FREEMASK:

8310E (8310)

8814E (8814)

8330E (8330)

8815E (8815)

8330FM

8815FM

8340E (8340)

8816E (8816)

**: Technical changes reserved.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Flash de Hensel

Hensel

Hensel eFLASH 250 Compact Manual de usuario

Hensel

Hensel EXPERT D 1000 Manual de usuario

Hensel

Hensel RF 3000P-XS Manual de usuario

Manuales populares de Flash de otras marcas

StreamLight

StreamLight PROPOLYMER 2AA Manual de usuario

StreamLight

StreamLight Stinger Manual de usuario

Silverline

Silverline 994024 Manual de usuario

Gama Sonic

Gama Sonic 23i60065 Manual de usuario

Olympia

Olympia RG580 CREE XM-L2 Manual de usuario

EUFAB

EUFAB 13495 Manual de usuario

OLIGHT

OLIGHT S35 BATON Manual de usuario

Kopp

Kopp Emergency Sensor Light Manual de usuario

YLP

YLP PROFESSIONAL Series Manual de usuario

Light motion

Light motion GoBe Manual de usuario

MOB

MOB MO8622 Manual de usuario

EuroLite

EuroLite KKS-3 Manual de usuario

Carson

Carson 500907010 Manual de usuario

Duracell

Duracell 550 Manual de usuario

Mactronic

Mactronic Black Eye 1300 Manual de usuario

Eurotops

Eurotops 29780 Manual de usuario

MOB

MOB MO8690 Manual de usuario

Pelican

Pelican L1 1930 LED Manual de usuario