Helmer I.C3 Manual de usuario

i.C³® User Guide

For Helmer i.Series®Incubators

360406/A

Countertop

PC100-Pro, PC900-Pro,

PC1200-Pro

Document History

Revision Date CO Supersession Revision Description

A 27 JUN 2019 14808 n/a Initial release.

* Date submitted or change order review. Actual release date may vary.

Document Updates

The document is furnished for information use only, is subject to change without notice and should not be construed as a commitment

by Helmer Scientic. Helmer Scientic assumes no responsibility or liability for any errors or inaccuracies that may appear in the

informational content contained in this material. For the purpose of clarity, Helmer Scientic considers only the most recent revision of

this document to be valid.

Support Information

Operation and Service Manuals provide additional product information. Product manuals are available at www.helmerinc.com.

Notices and Disclaimers

The i.C³® User Guide provides information about use of the i.C³. Refer to the product operation or service manual for general

information. Refer to the product service manual for additional information about the equipment on which the i.C³ is installed.

Condential / Proprietary Notices

Use of any portion(s) of this document to copy, translate, disassemble or decompile, or create or attempt to create by reverse

engineering or otherwise, the information from Helmer Scientic products is expressly prohibited.

Helmer, Inc., doing business as (DBA) Helmer Scientic and Helmer.

Disclaimer

This manual is intended as a guide to provide the operator with necessary instructions on the proper use and maintenance of certain

Helmer Scientic products.

Any failure to follow the instructions as described could result in impaired product function, injury to the operator or others, or void

applicable product warranties. Helmer Scientic accepts no responsibility for liability resulting from improper use or maintenance of its

products.

The screenshots and component images appearing in this guide are provided for illustrative purposes only, and may vary slightly from

the actual software screens and/or product components.

Helmer Scientic

14400 Bergen Boulevard

Noblesville, IN 46060 USA

www.helmerinc.com Part No. 360406/ Rev A

Contents

1 Overview ...........................................................................................4

Features............................................................................................4

Using the Touchscreen.................................................................................5

Care of the i.C3Screen.................................................................................5

2 Initial Setup.........................................................................................6

Language Conguration................................................................................6

Settings Conguration .................................................................................6

3 Home Screen Basics .................................................................................7

Home Screen Layout ..................................................................................7

Home Screen Icons and Indicators .......................................................................7

4 i.C3Applications (APPS) ..............................................................................8

Using i.C3 Applications .................................................................................8

5 Temperature Alarm Test.............................................................................. 10

6 Min/Max Temperature Monitoring ...................................................................... 11

7 Temperature Graph .................................................................................12

Event Data .........................................................................................13

Viewable with the 1-Day Time Span......................................................................13

8 AgiTrak (if installed)..................................................................................15

Agitator Status ......................................................................................16

Agitator Count Log ...................................................................................17

Agitator Diagnostics ..................................................................................17

9 Information Logs ...................................................................................18

Event Log..........................................................................................18

Event Log Detail Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Access Control Log (if installed).........................................................................20

10 Data Transfer ......................................................................................22

CSV Download......................................................................................22

Downloading Temperature Graphs and Alarm Event Data to PDF ..............................................24

Uploading Firmware Updates...........................................................................25

11 Customizing the i.C3Screen ..........................................................................27

Brightness Settings ..................................................................................27

Home Page Screensaver ..............................................................................27

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

12 i.C3 Settings .......................................................................................28

Password Protection of the i.C3Settings Screen ............................................................28

Temperature Setpoint .................................................................................29

Alarm Settings ......................................................................................29

Users and Passwords ................................................................................30

Sound Settings......................................................................................31

Display Settings .....................................................................................32

Device Status.......................................................................................33

Sensor Calibration ...................................................................................34

Date/Time..........................................................................................34

Auxiliary Systems....................................................................................35

Restore Factory Settings ..............................................................................35

System Functions....................................................................................36

13 Access Control (if installed) ...........................................................................37

Access Control Setup.................................................................................37

Access Control Screen................................................................................38

Access Control as the Home Screen .....................................................................39

14 Icon Transfer.......................................................................................40

Appendix A - Icon Reference Guide........................................................................41

Common Buttons ....................................................................................41

Application Icons ....................................................................................42

Appendix B - i.C3 Reference Guide ........................................................................43

General Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Alarm Settings ......................................................................................45

Event Log Codes ....................................................................................46

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

iii

1 Overview

Cautions

• To avoid injury, before using the i.C3 User Information Center, read all instructions in the associated product

operation manual.

• To avoid damage to the i.C3 unit, read all instructions provided in this user guide.

Features

The i.C3® consists of an intuitive user interface and icon-driven touchscreen. The touchscreen is contained within the

instrument bezel, as are additional features.

Touchscreen

The interface to the i.C3system.

USB Port

Connect a ash memory device to download temperature data or upload rmware.

Ethernet/RJ45 Connection (Not shown)

Allows the system to provide and receive data or commands to and from external devices.

Audio Speaker

Provides an audible signal when alarm conditions are met. Also provides audible signal when screen icons and

buttons are touched.

Touchscreen

Audio Speaker

(boom of bezel)

USB Port

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

Using the Touchscreen

The touchscreen and touch techniques make the i.C3easy to use. Icons, status indicators, and navigation buttons let

the user see and respond to i.C3system conditions and events.

Note

Anything that touches the screen is understood as a command. Do not let anything touch the screen unintentionally.

Touch Techniques

Touch-select Touch once to select an item.

Touch-drag To move an item, touch-hold to select the item and drag it to a new location. Use a deliberate

touch-drag motion (without lifting)

Touch-scroll To scroll, slide nger slowly across the screen (horizontal or vertical). Stop before lifting. For

more control while scrolling, keep your nger in contact with the screen.

Icons, Indicators, and Buttons

For a complete list of all icons and indicators, see the Icon Reference Guide at the end of this user guide.

Application icons serve as navigation buttons to the associated application screen.

Status indicators alert the user to a change of status.

Navigation buttons return the display the previous screen or the Home screen.

Care of the i.C3Screen

CAUTION

The iC3screen uses a sensitive touch technology.

• To avoid damage to the touchscreen, do not apply pressure on the front of the display bezel or around the

screen borders.

• To preserve optimal touch sensitivity, keep the screen clean of foreign objects. Avoid excessive dust accumulation

on the screen.

• Do not expose the i.C3 screen to liquids or a harsh environment that contains excessive dust, heat or humidity.

• Clean the i.C3screen with a clean, dry cotton cloth.

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

2 Initial Setup

Language Conguration

The Language screen is displayed when the i.C3 is powered on. Use the Language screen to select the i.C3 display

language.

Choose language

1. Touch the Language button. The language drop-down list is displayed.

2. Scroll to touch the language to be displayed. The selected language is displayed in the Language button.

3. Touch to conrm language selection, or to cancel.

4. Touch the Home icon to continue to the Home screen.

Note

English is the default language. Available languages may vary from those shown above.

Settings Conguration

Basic conguration parameters have been set for the i.C3 at the factory. If factory default settings need to be adjusted,

refer to i.C3Settings.

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

3 Home Screen Basics

Note

To temporarily silence active alarms, touch the Mute icon in the top right corner of the screen.

Home Screen Layout

The i.C3 Home screen is comprised of three information areas:

Information header - The dark blue horizontal band across the top of the Home screen. This header is displayed on all i.C3

screens. From left to right it includes: the Event Log icon, Screen ID, Unit ID, Date/Time, Battery indicator, and Mute icon.

Display zone - The middle band of the screen which includes information indicators and messages. From left to right, they

are: Status display; Alarm Conditions indicator and Alarm Conditions message; Primary Monitor Probe display; Min/Max

Temperature Display (if enabled).

Notes

• Primary Monitor Probe refers to the monitoring probe located on the right side of the chamber.

• Min/Max temperature display shows the highest and lowest Primary Monitor probe temperature occurrence within a

given period of time.

Application icons - Icons located at the bottom of the screen which include ve factory-preset application icons. From left to

right they are: i.C3 Applications (APPS), Settings, Temperature Graph, Automatic Alarm Test, and AgiTrak. These icons can

be changed or rearranged through the Icon Transfer feature. For more information refer to Icon Transfer.

Notes

• After two minutes of no interaction, the Temperature Graph screensaver is displayed (if enabled).

• Additional applications are available on the i.C3 APPS screen.

Home Screen Icons and Indicators

Touch the Event Log icon to

navigate to the Event Log screen. Touch the Reset icon to reset the

Min/Max display. Time since last

reset will be displayed.

Look for the New Event indicator

(red asterisk).

Touch the Mute icon to temporarily

silence alarm sound.

Screen ID

Unit ID

Event Log Icon-Indicator

Display Zone

i.C³ Applicaons

Primary Monitor Probe

Informaon Header

Alarm Condion Indicator

Alarm Condion Message

Min/Max Temperature Display

Min/Max Reset

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

4 i.C3Applications (APPS)

All i.C3 Applications can be reached from the i.C3 APPS screen.

Notes

• i.C3 Applications screen icons are interchangeable with those found on the Home screen.

• Primary Monitor probe reading and alarm conditions are displayed on the left side of the screen.

Using i.C3Applications

To navigate to an application screen, touch the associated application icon.

Contact Information

View product support information including the rmware revision numbers.

i.C3 Settings

All i.C3 system settings are congured and other preferences selected from the i.C3Settings screen.

Note

The i.C3 Settings screen is password protected, unless password protection is turned O󰀨 (from the i.C3 Settings screen).

If accessing the i.C3 for the rst time, use the factory-originated password (1234).

Brightness Settings

Adjust monitor screen brightness.

Icon Transfer

Reposition application icons on the Home and Applications screens.

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

Information Logs

Access all available data log applications.

Temperature Graph

View current and historical probe temperature data and alarm events.

CSV Downloads

Download information log(s).

PDF Downloads

Download historical information as a PDF.

Uploads

Upload rmware updates.

Alarm Test

Initiate automatic alarm tests for the high and low temperature alarms.

AgiTrak

Control agitator speed and view current agitator status.

Access Control (if installed)

Display keypad for incubator access.

Helmer Scientic i.C3 User Guide for i.Series Incubators

360406/A

Otros manuales para i.C3

Tabla de contenidos

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado

Helmer i.C3 Manual de usuario

Manuales populares de Equipo de grabación de otras marcas