Bale Processor
HELM WELDING (1983) LIMITED
24May16
Warranty Information
Helm Welding (1983) Limited warrants to the original user that goods & equipment of its manufacture are free from
defects in material and workmanship under normal use and service for a period of one year from the date of shipment,
or where applicable from the date of installation by the dealer.
Helm Welding (1983) Limited will, at its option, repair or replace parts (f.o.b. point of shipment) that are found to be
defective.
This warranty is on these further terms and conditions:
1. The equipment must be installed (when applicable), operated and maintained in accordance with Helm
Welding's instructions.
2. The equipment will fulfill the function it is designed to perform but due to wide variation in farm animals,
management practices on farms and other conditions beyond the equipment manufacturer’s control, no
specific level of performance is guaranteed.
3. Excluded from the warranty are damages caused by late delivery, ordinary wear and tear, erosion or corrosion,
lightning and other acts of God, accident or alteration, repair or attempted repair or adjustments made by
persons not authorized by Helm Welding (1983) Limited, by misuse, abuse or improper handling or operation of
the equipment by the purchaser or any third party, or by poor or no servicing of machine.
4. Helm Welding (1983) Limited shall in no event be responsible for any consequential damages of any nature
whether special or general, direct or indirect.
5. Equipment, parts or accessories manufactured by others and not sold under Helm Welding (1983) Limited
trademark(s) carry the warranty and remedy provided by their manufacturer only.
6. Any warranty or claim, which differs from that herein set out is unauthorized by Helm Welding (1983) Limited
and is the warranty solely of the party making it. Helm Welding (1983) Limited makes no other warranty
express or implied and the original user's sole remedy for breach thereof is as set forth above.
To properly qualify for warranty, all maintenance criteria and service schedules must be followed. As well, the
pre-delivery check list and warranty registration forms must also have been completed at the time of product
delivery and returned to us the manufacturer for proper record keeping.
In extreme warranty situations, the service record must be provided to Helm Welding upon request at any time.
Failure to follow and provide any of the above information will void warranty.
The warranty registration card must be completed and mailed within thirty (30) days of
delivery or installation of the equipment to validate this warranty.
Note: Credits or replacements will not be issued unless documentation is complete and correct.
Date of installation Serial Number
Your Luck//Now Dealer
Name
Address
Telephone Number
