Hella Gutmann mega macs 50 Manual de usuario
User‘s Manual
mega macs 50
2
CONTENTS
Subject Section Page
Device description
Views B 3 — 4
Keypad B 3
Changing the batteries B 5
Screen functions C 6 — 7
Settings
Display D1 8
Company data D2 9 — 10
Version D3 11
Update D4 12 — 15
Interface D5 16 — 20
Language D6 20
Batteries D7 21
System parameters D8 22
Simulation D9 23
Test function D10 24
Diagnosis folder D11 25
Diagnosis
Control unit communications E 26 — 30
Reading/deleting fault codes F 31 — 32
Reading parameters G 33 — 35
Actuator H 36
Service reset J 37 — 38
Basic settings K 39
Coding L 40
Multimeter
Settings M 41 — 47
Two-channel M 48
Temperature M 49 — 50
Component measurement M 50
Diagnosis folder
Description N 51 — 52
General
Preliminary remark O 53
Data protection O 53
Exclusion of liability O 54
Safety O 55 — 56
Maintenance and care O 56
Disposal O 56
3
DEVICE DESCRIPTION
mega macs 50 is a portable diagnostic device for the identication and rectication of faults in vehicle electronic
systems. This manual contains a detailed explanation as to its use etc. All the illustrations are examples.
Uses
Control unit communications:
• Reading/deleting fault codes
• Reading parameters and present in graphic form
• Actuator test
• Service reset
• Basic settings
• Coding
Measuring functions:
• Voltage, current, resistance, temperature
• Two-channel multimeter
> Print <
If mega macs 50 is connected to a PC, data can be transmitted and printed out. The >Gutmann Portal< programme
must be installed on the PC (see section D4).
mega macs 50 Section B 1/3
mega macs 50 TFT display and keypad
Key Function
Print
Escape/return
Function keys
Cursor up/down
Cursor to the right
Cursor to the left
ENTER key
On/o switch
ESC
PRINT
ON/OFF
F1 F2 F3
Printing
Print window The current window will be printed
Diagnosis folder printer The diagnosis folder is opened, and the selected diagnosis printed.
Diagnosis folder e-mail Not yet released
Remote support enquiry Not yet released
Start remote Linked to Gutmann >Remote< programme
Send protocol data Not yet released
4
mega macs 50 - Top
Connecting sockets from left to right
mega macs 50 - Bottom
Connecting sockets from left to right
mega macs 50 - Back
mega macs 50 Section B 2/3
Connections
Test connection, minus Channel 2
Test connection, plus Channel 2
Diagnostic connection ST2 for diagnostic cable and
current clamp
Test connection, plus Channel 1
Test connection, minus Channel 1
Connections
Mains Power supply unit and charger
USB device PC connection for data update
and communication with
PC programs
USB host External hardware activation
Serial interface RS232
Extending support Rating plate
Changing the rechargeable batteries
Procedure:
1. Switch o mega macs 50 and remove all connecting leads.
2. Remove the protective casing, starting at the narrow end.
3. Remove six fastening screws using a suitable tool, e.g. >PH1<.
4. Open up the back panel to the right.
5. Carefully lever o the plastic cover using a suitable tool.
6. Replace the batteries, pay attention to correct polarity.
7. Reassemble in the reverse order.
5
CAUTION
Do not pull o any cable plugs.
mega macs 50 Section B 3/3
NOTE
Recycle used batteries in accordance with the applicable environmental and disposal regulations.
6
Screen functions
The display consists of a header, a selection- or display window and a footer.
Header
The header is highlighted in green and displays the current menu option.
Selection window
The selection window is highlighted in blue and displays the menu options.
Checking display
Use
Procedure:
Select and conrm line.
mega macs 50 Section C 1/2
Header
Footer
mega macs 50 > Diagnosis > Peugeot > 306 Diesel
F3 Search
306 1.9 D WJY (DW8) 00-01
306 1.9 D DJZ (XUD9Y) 93-00
306 2.0 D HDI RHY (DW10TD) 99-01
306 1.9 TD DJY (XUD9A) 94-99
306 1.9 D WJZ (DW8) 98-00
Selection window
Checking display functions
red No connection with external systems
yellow External systems connected, mega macs ready for communication.
green/yellow ashing Active communication with external systems
7
Display window
The display window is highlighted in blue and depicts all values and information.
Footer
The footer indicates the signicance of the function keys. Keys F1, F2 and F3 bring up a text corresponding to the
selected menu, explaining its function.
Example: F1 Info, F3 Channel
A selection window is opened with the F2 menu function key. Functions are called up according to the menu
option.
Example: F2 zero balance, zero line and trigger.
mega macs 50 Section C 2/2
mega macs 50 > Diagnosis > Peugeot > 306 Diesel
F1 Info F3 Channel
Speed
rpm
870
Coolant temperature °C
69.0
Brake light switch
O
Header
Footer
Display window
8
SETTINGS
All the programs required to
• adjust
• check and
• install updates
to mega macs 50 are stored in the main > Settings < menu.
Settings > Display <
The brightness of the display can be adjusted in the > Display < menu.
Procedure:
1. Select and conrm > Display < .
2. Select brighter/darker.
3. Change setting: press and hold key.
4. Return with
mega macs 50 Section D1 1/1
mega macs 50 > Settings
Display
Company data
Version
Update
Interface
Language
Batteries
System parameters
Simulation
Test function
Diagn. folder
Brightness
Brighter
Darker
ESC
9
Settings > Company data <
Input of the company address which will be printed on the report of the diagnosis folder.
Procedure:
1. Select and conrm > Company data < .
2. Select and conrm address box.
mega macs 50 Section D2 1/2
mega macs 50 > Settings
Display
Company data
Version
Update
Interface
Language
Batteries
System parameters
Simulation
Test function
Diagn. folder
Helligkeit
Name 1 Autohaus
Name 2 Mustermann
Street Bergstrasse 5
POSTCODE 79XXX
Town Somewhere
Company data
Name 1 Autohaus
Name 2 Mustermann
POSTCODE 79XXX
Town Somewhere
Helligkeitmega macs 50 > Settings
F1 Delete F3 Return Enter Enter Accept UP Keypad
Street
Bergstrasse 5
NOTE
Hihghlighted in blue This entry is marked.
Cancel the marking with key
Mark with keys.
F1 Deletes the marked entry.
F3 Deletes all entries to the left of the mark.
Enter Accepts all the entries in that eld.
UP Corresponds to the key. The virtual keypad is
opened, marked entries are deleted.
10
4. Open the virtual keypad.
4. End input.
5. Accept address box.
6. Conrm message accordingly.
7. Enter inputs into the other address boxes as described above.
8. Return to main menu with 2 x
The inputs are stored and can be printed out on the diagnosis folder report.
mega macs 50 Section D2 2/2
Street
Bergstrasse 5
ABCDEFGHIJKLMNOPQRSTUVWXYZ
a b c d e f g h i j k l m n o p q r s t u v w x y z
1234567890 . , - + / % & < > ( ) ; :
_ äÄöÖüÜß
Info message
Accept settings conclusively?
ENTER (Yes) ESC (No)
ESC
ESC
Using the keypad
Select character
Accept character
Space Underscore before the umlauts in the bottom line
Otros manuales para mega macs 50
1
Tabla de contenidos
Otros manuales de Equipo de diagnóstico de Hella Gutmann
Hella Gutmann
Hella Gutmann mega macs ONE Manual de usuario
Hella Gutmann
Hella Gutmann mega macs 50 Manual de usuario
Hella Gutmann
Hella Gutmann CSC-Tool Manual de usuario
Hella Gutmann
Hella Gutmann mega macs ONE Manual de usuario
Hella Gutmann
Hella Gutmann mega macs ONE Manual de usuario
Hella Gutmann
Hella Gutmann mega macs 42 Manual de usuario
Hella Gutmann
Hella Gutmann mega macs 56 Bike Manual de usuario
Hella Gutmann
Hella Gutmann SEG V Manual de usuario
Hella Gutmann
Hella Gutmann mega macs ONE Manual de usuario
Hella Gutmann
Hella Gutmann mega macs 56 Manual de usuario
Hella Gutmann
Hella Gutmann Mega Macs 77 Manual de usuario
Hella Gutmann
Hella Gutmann Radaufnehmer Control Manual de usuario
Hella Gutmann
Hella Gutmann MT 77 Manual de usuario
Hella Gutmann
Hella Gutmann mega macs PC Manual de usuario
Hella Gutmann
Hella Gutmann MT-HV Manual de usuario
Hella Gutmann
Hella Gutmann mo macs 50 Manual de usuario
Hella Gutmann
Hella Gutmann mega macs PC Bike Manual de usuario
Hella Gutmann
Hella Gutmann MT-HV Manual de usuario
Hella Gutmann
Hella Gutmann mega macs 66 Manual de usuario
Hella Gutmann
Hella Gutmann mega macs 42 SE Manual de usuario
