HeimVision HM132 Manual de usuario
Video Monitoring System
HM132
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
SAFETY CAUTIONS
Incorrect operation of the product(s) may lead to safety risks. Therefore, we STRONGLY
recommend you read the instructions carefully before the first use.
PACKING LIST
Keep the cord(s) away from children in case of stragulation (3 feet/1 meter away).
Put the product(s) in a dry place in case of short-circuit.
Use the Power Adapter(s) provided by us ONLY. Using unauthorized charging cables and
Power Adapters may result in overheat even explosion.
Unplug the Power Adapter(s) if you don’t use it (them).
Check your baby’s activities regularly as this product is not designed for supervision but
for assisting your supervising.
Monitor
Camerar
a
Camera mount
User manual
Power Adapter x 2 (5V/1A)
Spare Wide-angle Lens
(Optional)
Mount Kit
4
PRODUCT OVERVIEW
Camera
(Front)
(Back)
(Bottom)
Night vision Sensor
IR LEDs
Camera Lens
Microphone
Power Indicator
Antenna
Speaker
Temperature Sensor
Power Input
Pair Button
Mounting Hole
Tip:
The Power Indicator will be solid blue after the camera is powered on and will turn off in the dark.
5
Monitor
Sound Level Indicator:
Flash blue/orange/red for different sound levels when detecting the sound from the camera.
Power indicator:
Charging when the monitor is powered off: It turns red when charging, and off after fully
charged.
Charging when the monitor is working: It turns pink when charging, and blue after fully
charged.
It turns blue when working without connecting to power.
Screen:
Before your first use, please peel off the protective films on the screen and the camera lens to
obtain the best view.
Power/Sleep Button:
Long press to turn on/off the monitor;short press to screen on/off.
Display Mode Switch:
Press to switch the mode among displaying the live view from camera 1, displaying the live
view from camera 2, and displaying the views from both cameras with split screen mode.
6
Menu/Back
Press to display the menu bar or serve as a Back button.
Left/Volume-:
Press to change your selection leftward or to turn down the volume.
Up/Brightness+:
Press to change your selection upward or to increase the brightness.
Right/Volume+:
Press to change your selection rightward or to turn up the volume.
Down/Brightness-:
Press to change your selection downward or to decrease the brightness.
OK:
Press to confirm your selection.
Lullaby:
Press to select one lullaby for your baby from 8 lullabies, set to play all the lullabies in a loop, and disable
the lullaby in proper order.
Hold to Talk:
Long press to turn on microphone and talk to your baby when needed; release to turn it off.
14. Reset Hole
15. Battery Compartment
16. Antenna
17. Speaker
18. Power Input
19. Support Stand
20. Microphone
7
Notes:
GETTING STARTED
Step 1:
Charge the monitor by connecting the Power Adapter to the monitor and a socket. It
takes about 4 hours for the monitor to be fully charged, and the battery lasts about 4-5
hours.
Step 2:
Connect the Power Adapter to the camera and a socket to power on the camera.
If you RESET with a pin, the monitor will be forced shutdown.
Do not open the battery compartment and replace the battery without official
guidance.
Please unfold the antenna to strengthen the signal and reduce interference.
Press until all the volume bars turn white to turn off the sound from the
camera.
Charging: Red/Pink
Fully Charged: Blue
Step 3:
Place the camera at least 3ft/1m away from your baby.
8
Step 4:
Gently press and hold the Power Button for 3s to turn on the monitor, then you can see
the live view.
Notes:
ICONS EXPLANATION
You will see the interface below after the monitor is turned on.
Status Bar Icons
No signal connection
Signal strength
The camera has been paired with the monitor already, just plug and use.
If it shows after turning on the monitor, this is likely due to the far distance between the monitor
and camera, the unsuccessful factory pairing, or the camera disconnected to power. Please move
the monitor closer to the camera, manually pair the monitor with the camera following the section
on page 11, or connect the camera to power accordingly.
Please turn off the screen to save battery power when you don’t need to watch live video. If the
Sound Detection is enabled, the screen will turn off in 15s without any operation.
9
Live view from camera 1/Live view from camera 2
Live views from both cameras with split-screen mode
Lullabies disabled/Lullaby 1 to 8/Play all the lullabies in a loop
Speaker disabled/Speaker enabled
Night Vision activated (the image will turn to white and black)
Low/Medium/High sensitivity level for sound detection
Current room temperature
Time
Battery level
Notification Icons
No camera paired/camera disconnected to power/far
distance between the monitor and the camera
Feeding Reminder
Temperature Alarm
60°F
12:57AM
10
FUNCTION OVERVIEW
Feeding
This function aims to remind you of feeding your baby. OFF means you shut down the
function; 0:30 means it will remind you every 30 minutes and so on for the other
options.
Step 1:
Press to display the menu bar.
Step 2:
Press to select the time you want. Select OFF to turn off the feeding reminder.
Step 3:
Pres OK to confirm.
Tip:
The monitor will beep and display an icon when it is the feeding time. Press any
button to stop the alarm.
Lullabies
This function helps you to comfort your baby when needed. There are 8 lullabies
preloaded in the camera, please select one that satisfies your baby.
Tabla de contenidos
Idiomas:
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario