.. Make sure that the transport bolt are removed.
arate earthed socket for the
.. Make sure that the plu
.. Make sure that the fuses in the
ower circuit are rated
for 15A
.. Keep away from heat sources and direct sun li
revent plastic and rubber components from a
.. Make sure that the power cord is not cau
n the appliance and avoid dama
oints and connections are
joints are loose or there is leaka
x loose threads to prevent the items
necessary, put small items into a net bag
... Turn off the machine after each wash pro
ram and
switch it off at the mains to save electricity and for safety. Wipe
lean the lower part of the porthole
revent formation of odours
the manufacturer, his
service agent or other accordingly qualified persons, in case it is
xperience and knowledge without supervision or instruction by a
ammable detergent or dry cleaning agent
ammable sprays in close vicinity to the
rm persons to play with the appliance
lace, or in an
area which ma
rone to water leaks such as under or near a
a water leak allow the machine to dr
ose
to a wall or furniture.
T ...
... Touch the washer door during the washing process - i
oam rubber or sponge-like materials
ent distribution drawer durin
... Force the washer door open. The door is
-lock device and will open shortly a
... Open the washer door if the water level is visibly over
t
machine with plastic cover so tha
nside dampness cannot be kept in
