PRO Digital Overlay User Guide
GROUPED MIXERS
When Mixers are linked together, the first
Mixer in the group defaults as the master
Mixer, and each concurrent Mixer in the
group becomes a slave Mixer. Each slave Mixer in a group
will display “REMOTE CONTROL” in the main screen to
signify it is functioning in a group.
TEXT MESSAGES
The PRO Digital Overlay also displays
text messages in the main screen. This
allows the engineer to communicate with
players without using the intercom feature. After a message
is sent, it will continue to flash on the main screen until the
Mixer is adjusted (e.g. touch a knob, press a button). Text
messages can be sent from the Hear Back PRO iOS app
to all the Mixers in a session or to specific individual Mixers
equipped with a PRO Digital Overlay.
Send a Text Message to All Mixers in a Session:
1. Open the Hear Back PRO iOS app > Select the “Devices”
menu
2. Click on the text message icon > A dialog box will open.
3. Type a short text message (up to 36 characters) > Select
“Send” > The message will appear and begin flashing on
each of the Mixers’ main screens.
Send a Text Message to a Specific Mixer:
1. Open the Hear Back PRO iOS app > Select the “Devices”
menu
2. Swipe left on the Mixer to receive a message.
3. Select the “More” button to view additional functions.
4. Select “Send Text Message” from the drop down menu >
A dialog box will open.
5. Type a short text message (up to 36 characters) > Select
“Send” > The message will appear and begin flashing
only on that specific Mixer’s screen.
6
MAIN SCREEN DISPLAY
The main screen at the top left of the Digital Overlay displays
the Mixer’s name and status including firmware version,
channel levels, mode status, preset function, and text
messages.
FIRMWARE DISPLAY
Each time a Mixer equipped with the PRO Digital Overlay
completes its power up cycle, the main screen will display
the current Mixer firmware and boot version, as well as the
current Mixer overlay version.
CHANNEL KNOB ADJUSTMENTS
In addition to the seven LED indicators above each channel
knob, levels are tracked and the exact value is displayed
by the main screen. The main screen will display “Volume
Mode”, “Pan Mode”, and “Stereo Width Mode” statuses.
After adjusting, the main screen will continue to display the
channel name and current set value for approximately 4
seconds or until another channel is adjusted.
VOLUME MODE
When making adjustments to one of the
16 channel knobs, the respective channel
name will appear in the main screen as
well as its current adjusted value as a
percentage from 0-100%.
PAN MODE
When making adjustments while in “Pan
Mode” mode, the respective channel
name will appear in the main screen, with
the pan value in percentage, as well as,
the pan direction as “% Left”, “Center”, or “% Right”.
STEREO WIDTH MODE
When stereo-linked channels are present,
current stereo width settings are displayed
as “% Wide”, “Mono”, and “% Reverse”.
PRESETS
The following preset functions are displayed in the main
screen:
• “PRESET # LOADED” - displays which
preset is selected
• “PRESET # SAVED” - displays when
a current preset is being stored or
overwritten
• “PRESET ERASED” - if a preset is
zeroed out by holding the PAN and
AUX buttons simultaneously
MIXER 65EO
INPUT 1
VOLUME
28%
MIXER 65EO
INPUT 1
PAN
55% RIGHT
MIXER 65EO
INPUT 5
WIDTH
38% REVERSE
MIXER 65EO
M I X E R V 0 6 .1 0
B O O T V 02.25
O L E D V 0 1.0 8
MIXER 65EO
M I X E R V 0 6 .1 0
B O OT V0 2.2 5
OLED V01.08
INPU T 01 INPU T 02 INPUT 03 INPU T 04
INPUT 05 INPU T 06 INPUT 07 IN PUT 08
Main Screen
MIXER 65EO
PRESET 1
LOADED
MIXER 65EO
PRESET 3
SAVED
MIXER 65EO
PRESET
ERASED
MIXER 65EO
REMOTE
CONTROL
MESSAGE:
HELLO FROM
THE CONTROL
BOOTH
