Double Tap# # 2 quickly repeated taps!
Press###Approx: 1 second!
Press & Hold# # Approx: 5 seconds!
Charge your headset
Make sure that your headset is fully chargedfor two hours before you start using it.!
Use the AC Power supply to charge from a power socket. When the battery indicator has a solid
red light, your headset is charging. When the headset is fully charged the battery indicator turns
solid green for five minutes and is the turned off.!
Use only the charger provided in the box - do not use charger from any other devices as this man
damage your headset.!
Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged
for a long period. We therefore recommend that your recharge your device at least once a month.!
Turning your headset on and off!
-Slide the on/offbutton towards the symbol ”I” to turn the headset ON. When you do so both
indicators will flash on the headset.!
-Slide the on/offbutton towards the symbol ”O” to turn the headset off.!
Pairing it With your Phone
Headsets are connected to phones using a procedure called ”pairing”.!
By following a few simple steps, a phone can be paired with a headset in a matter of minutes.!
1. Put the headset in pairing mode. When you turn on your hear/pro for the first time, the
headset will automatically start up in pairing mode - i.e it is discoverable for your phone. When
the headset is in pairing mode the Bluetooth status indication on the StatusDisplay is flashing.!
2. Set your Bluetooth phone to ”discover” the hear/pro 645x. Follow your phone`s instruction
guide. First make sure that Bluetooth is activated on your mobile phone. The set your phone to
discover new devices. This usually involves going to a ”setup”, ”connect” or ”Bluetooth” menu on
your phone and selecting the option to ”discover” or ”add” a Bluetooth device.!
3. Your phone will find the hear/pro 645x #Your phone will find the headset under name ”hear/
pro 645x”. Your phone then asks if you want to pair with the headset. Accept by pressing ”Yes or
Ok” on the phone. You may be avsked to confirm with a passkey or PIN. Then use 0000 (four
zeros). Your phone will confirm when pairing is complete and the Bluetooth status indication on
the StatusDisplay will shift from flashing light to steady light and the headset voice guidance will
say ”connected”!
Manual pairing mode
If you with to use the headset with a different phone, or if the pairing process was interrupted, you
can manually set the headset to pairing mode.!
Make sure the headset is on. Press and hold the answer/end button for approximately 5 seconds
until the Bluetooth icon turns from a steady light to a flashing light. Then repeat step 2 and 3 in
the above pairing guide.!
Connection with your phone
Pairing is only needed the first time a headset and phone are use together. When the headsetand
phone have been paired once, they will automatically connect when the headset is on and
Bluetooth is activated on the phone. The headset can be used when it is ”connected” to the
phone. If the devices are paired, but do not immediately connect, tap the answer/end button.
