4598-1160-05
Maximum
Maximum Range Coverage Angle
MAX
MIN
RANGE
ON-TIME DUAL BRITE™
TEST 1 5 20
MINUTES
OFF 3 6 DUSK TO
DAWNHOUR
B
O
O
S
T
Motion
Motion
8ft.
(2.4m)
70ft. 100ft.
(21m) (30.5m)
Boosted
Sensor
240°
Du a l Zo n e ™
Du a l Zo n e ™
Du a l Zo n e ™
Du a l Zo n e ™
Bottom of Sensor
Avoid aiming the control at:
•Objects that change temperature rapidly, such as
heating vents and air conditioners.These heat
sourcescouldcausefalsetriggering.
•Areaswherepets or trafficmaytriggerthecontrol.
•Nearby large, light-colored objectsreectinglight
maytriggertheshut-offfeature.Donotpointother
lightsatthesensor.
Least Sensitive Most Sensitive
NOTE: Du a l Zo n e ™isanewzoneofdetectionwhich
wasaddedasanoptiontoselectHeath®/Zenithmotion
sensingproducts.Thisfeatureaddsazoneofdetec-
tionunderthemotionsensor.Du a l Zo n e ™requires
noadditionaladjustmentandoperatesinconjuction
withtheforward-lookingsensor.
3. Loosentheclampscrewinthe
sensor ball joint and gently
rotatethesensor.
4. Walk through the coverage
area noting where you are
whenthelightsturnon(also,
theLEDwillashseveraltimes
whenmotionisdetected).Move
thesensorheadup,down,or
sidewaystochangethecover-
agearea.Keep the sensor at
least 1" (25 mm) away from
the bulbs.
5. AdjusttheRANGEasneeded.
RANGE set too high may
increasefalsetriggering.
6. Secure the sensor head by
tightening the clamp screw.
Donotovertightenthescrew.
7. SettheamountofTIMEyouwantthelightstostay
onaftermotionisdetected(1,5,or20minutes).
8. SettheDu a l Br i t e ®switchtotheamountoftime
afterduskyouwantthelightsonatlowlevel(Off,
3,6Hrs.,Dusk-to-Dawn).
Clamp
Screw
Ball
Joint
Aim Sensor
Down for Short
Coverage
Aim Sensor
Higher for Long
Coverage
NOTE:
Ifxtureismountedhigherthan8ft.(2.4m),aiming
thesensordownwillreducecoveragedistance.
Thedetectorislesssensitivetomotiondirectlytowardsit.
WARNING - Risk of fire. Do not aim the bulbs
at a combustible surface within 3 ft. (1 m).
TEST AND ADJUSTMENT
1. Turn on the circuit breaker and light switch.
NOTE: Sensor has a 1 1/2 minute warm up period
beforeitwilldetectmotion.Whenrstturned
on,wait11/2minutes.
NOTE: Meetsthe ENERGY STAR® guidelines when
Du a l Br i t e ®functionisoffandON-TIMEis1or5minutes
andwhenusedwith120WMaxbulbs.
2. Turn the RANGE control to the medium position
(halfwaybetweenMINandMAX),Du a l Br i t e ®toOFF,
andtheON-TIMEcontroltotheTESTposition.
