Healing HHT895 Manual de usuario

1. INTRODUCTION........................................................................................................... 2

1.1 SAFETY INSTRUCTIONS.......................................................................................................2

1.2 HHT895 FEATURES INCLUDE:........................................................................................... 3

1.3ACCESSORIES INCLUDED WITH YOUR RECEIVER:..............................................................4

2. INSTALLATION ............................................................................................................ 4

2.1 FRONT PANEL...................................................................................................................... 4

2.2 REMOTE CONTROL UNIT BATTERY CARE.......................................................................... 4

2.3 REMOTE CONTROL UNIT FUNCTIONS ................................................................................5

2.4 RCU RECORDER KEY FUNCTIONS......................................................................................6

2.5 REAR PANEL........................................................................................................................ 6

2.6 CONNECTION.......................................................................................................................7

3. MAIN MENU ................................................................................................................. 8

4. EDIT CHANNELS......................................................................................................... 8

4.1 TV CHANNEL LIST...............................................................................................................9

4.2 DELETE ALL ......................................................................................................................10

5. INSTALLATION .......................................................................................................... 10

5.1AUTO SCAN .......................................................................................................................11

5.2 MANUAL SCAN ..................................................................................................................11

5.3AERIAL ADJUSTMENT........................................................................................................11

5.4 LCN LOGICAL CHANNEL NUMBERING.............................................................................12

6. SYSTEM SETUP ........................................................................................................ 12

6.1 LANGUAGE ........................................................................................................................ 12

6.2 TV SYSTEM .......................................................................................................................12

6.3 LOCAL TIME SETTING .......................................................................................................12

6.4 TIMER SETTING .................................................................................................................13

6.5 PARENTAL LOCK ...............................................................................................................13

6.6 OSD SETTING ...................................................................................................................13

6.7 RENAME FAVORITE............................................................................................................14

6.8AUTO POWER-DOWN.........................................................................................................14

7. TOOLS........................................................................................................................14

7.1 INFORMATION..................................................................................................................... 14

7.2 LOAD FACTORY SETTING.................................................................................................. 14

7.3 UPDATE BY USB............................................................................................................... 15

7.4 USB DEVICE .....................................................................................................................15

7.5 REMOVE USB DEVICE SAFELY .........................................................................................15

8. GAME .........................................................................................................................15

9. REC (RECORDER)..................................................................................................... 16

9.1 RECORDING MANAGER..................................................................................................... 16

9.2 RECORDER HDD INFORMATION ....................................................................................... 16

9.3 HDD (STORAGE DEVICE)FORMAT .................................................................................. 16

9.4 DVR (RECORDER)CONFIGURATION................................................................................17

9.5 RECORD PROGRAM.........................................................................................................17

9.6 RECORD TYPE.................................................................................................................17

9.7 TIME SHIFT...................................................................................................................... 17

10. INTRODUCTION TO OTHER FUNCTIONS ............................................................. 18

10.1 PROGRAM INFORMATION ................................................................................................18

10.2 ELECTRONIC PROGRAM GUIDE...................................................................................... 19

10.3 FAVORITE LIST ................................................................................................................19

10.4 VOLUME CONTROL ......................................................................................................... 19

11. TECHNICAL SPECIFICATION ................................................................................. 20

12. TROUBLESHOOTING.............................................................................................. 21

13. TWELVE MONTH WARRANTY................................................................................ 22

1. Introduction

Your healing HHT895 is a Television receiver that includes a wide range of useful

functions. Please make sure you read this manual before installing your receiver.

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

•In a closed or poorly ventilated cabinet;

•Directly on top of or under any another equipment;

•On a surface which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

•To direct sunlight or near any other equipment that generates heat;

•To rain or intense moisture;

•To any shock which may cause permanent damage to your receiver;

•To any magnetic objects, such as loudspeakers, transformers, etc.;

•To intense vibration;

•Never open the cover. High Voltage electrical hazards make it dangerous to touch the

inside of the receiver. Your warranty will be void if the receiver has been opened.

•When the receiver is not used for a long period of time, you should unplug the power

cord from the wall socket.

•Do not touch with wet hands or use if power lead is damaged, it may cause electric

shock.

•Place the receiver in a well-ventilated environment that allows heat to dissipate.

•When connecting cables, ensure that the receiver is disconnected from mains power.

•Do not use your receiver in a humid environment.

1.2 HHT895 Features Include:

• Receives HD and SD Digital Terrestrial TV broadcasts

• USB 2 recorder with Time-Shift, supports most USB keys and HDD’s

• 8 Recording Timers with once, daily or weekly modes & sleep/wake timer

• Also plays jepg and mp3 files

• Excellent Audio & Video quality

• Simple to connect with all outputs active simultaneously

• HDMI Component Composite and RF outputs

• 1,000 channel memory capacity

• User-friendly On Screen Display and Menu system

• Signal Quality and Intensity indicator bars

• Scans fast, accepts a broad range of parameters

• 5V DC for amplifiers etc. available at input

• Electronic Program Guide (EPG) program information up to 7 days +

• Edit TV or Radio program names

• Parental channel and menu Lock function

• Sub Title (Closed Caption) and Teletext functions

• Multi-lingual On Screen Menu system in: English, French,

German, Italian, Spanish, Portuguese, Russian, Polish, Swedish,

Greek, Danish, Croatian, Dutch, Finnish, Hungarian & Slovenian

• 8 Favorite lists for groups of TV and Radio programmes

• Last viewed channel and sound level resumes at start up

• Firmware upgrade by USB key

• Calculator with Tetris, Othello & Sudoku Game functions

• Front panel LED display shows Channel Number or Time

• Local Time Setting fully adjustable by user

• Logical Channel Numbering (LCN) user selectable

• Auto Power – down, select from 1hr, 3hr, 5hr or Off

• Separate power switch simplifies re-boot and mains power disconnection

• Earthed mains lead for better results from weak signals

• Fully functional with MPEG4 / H264 and MPEG2 streams

• Inbuilt RF Modulator shows HD program on old and new TV’s

1.3 Accessories Included with your receiver:

●1 x User’s Manual

●1 x Remote Control Unit

●2 x Batteries (AAA type)

●1 x RCA AV interconnect cable

2. Installation

2.1 Front Panel

Front Panel drawing

1. STANDBY key Switches the receiver between Standby and Operational states.

2. MENU key Displays Main Menu or return to previous Menu.

3. CH- / CH+ key Moves cursor Up or Down in Menu state,

changes to previous or next program in Non-Menu state.

4.VOL-/VOL+ key Increases or decreases Audio volume level in Non-Menu

state. changes setting values in specific Menu items.

5. OK key Executes selected Menu item in the menu or confirms an input value.

6. USB2.0 slot (on the side of receiver) Connect an external USB key or Hard Disk

Drive to Record or Play program material, play MultiMedia files or upgrade firmware.

2.2 Remote Control Unit Battery Care

To ensure long life from your Remote Control Unit:

1. Double check that the polarity indicators of batteries and RCU terminals correspond.

2. Do not mix new and old or different types of batteries together.

3. Never leave old or exhausted batteries in the remote control.

4. If storing your receiver for weeks or longer, remove the batteries from the RCU.

5. Only rechargeable cells (NiMh etc.) should be recharged, and on a purpose built charger.

6. Do not attempt to disassemble, short-circuit, heat or throw batteries into fire.

7. In the event electrolyte fluid does leak from a battery inside the remote control, wipe away

with a damp cloth, rinse the cloth thoroughly and insert new batteries.

*Damage to your RCU from leaking battery electrolyte is not covered by Warranty.

2.3 Remote Control Unit Functions

:Key: Switches receiver On and Off,

(Standby and Operational).

: Key: Mutes the receivers Audio outputs.

0-9: keys: Selects channels by number and

provides number input to functions where required.

V.F: key: Video Function, selects video output from:

Native TV, 480i, 480p, 576i (default), 576p, 720p 50Hz, 720p

60Hz, 1810i 25Hz and 1080i 30Hz.

TV/R: key: Switches between TV and Radio mode.

MENU: key: Shows the Main Menu and

exits to Normal viewing mode from any Menu level.

EXIT: key: Exits Menu or Sub-Menu and cancels functions in

progress.

OK: key: Displays Channel List for TV or Radio Mode or

activates Menu Item highlighted on screen

▲▼keys: Select the Next or Previous program, when

menu off or moves cursor Up or Down when in Menu mode.

◄►keys: Increase or decrease Audio volume level when

menu off or changes setting values within a menu mode.

FAV: key: Switches Favorite channels mode ON or OFF.

EPG: key: Displays Electronic Program Guide (EPG)

when Menu mode is off.

V+ / V-: keys: Increases or Decreases Audio volume level.

AUDIO: key: Switches between Stereo ((•)), Left-Mono ((• or Right-Mono •)).

INFO: key: Shows tuned Program Information

FIND: key: Lists recordings available on your external USB storage device.

P+ / P-: keys: Selects the Next or Previous Program.

RCL: key: Selects last channel viewed.

PAUSE: key: TimeShift, Multi Media or normal viewing Freeze and Resume.

SUB: key: Displays a list of subtitled languages the tuned channel supports.

TEXT: key: Displays any Teletext on tuned channel.

2.4 RCU Recorder key functions

key: 【PAUSE】key: Pause key: Last

key:Next key: Record for Recorder and Media Player

key: Play for Recorder & Media Player key: Fast Reverse

key: Fast Forward key: Stop

2.5 Rear Panel

Rear Panel drawing

1. ANT IN Input from TV Antenna.

2. LOOP OUT Antenna Loop Out, inactive when receiver in standby.

3. TO TV Modulator output, connect to TV without AV input.

4. LOOP IN Input to mix with internal RF modulator.

5. AUDIO Left and RightAudio out for your TV or an external amplifier, RCA fem. x 2.

6. VIDEO Composite Video (CVBS) SD Analogue output for TV’s etc. RCA female.

7. HDMI Video & Audio output, optimum quality – HD Digital AV, all in 1 connector.

8. Y, Pb, Pr Component Video out, HD Analogue RCA female x 3.

9. S/PDIF Coaxial digital Digital Audio out, for external decoders etc. RCA fem. x 1.

10. Power ON/OFF Switch isolates mains power to simplify receiver re-boot.

11. Power Cord requires 100 - 240V AC (Auto selected), 50 - 60Hz @+/-5%.

2.6 Connection

Note: Before connecting, unplug power from all devices.

Connection drawing

2.4.1 Connecting a Terrestrial Antenna

The cable from a functional terrestrial antenna must be connected to the ANT IN connector

at the back of the receiver, before the receiver can display broadcasts.

2.4.2 TV Connection Options

1. For older TV’s without AV Inputs, connect receivers antenna output connector marked

TO TV to the antenna input of the TV. Tune the TV to the RF output channel 38 to see

pictures and hear sound. Cable should be purchased separately.

2. Composite; connect the Video, Audio Left, and Right RCA output connectors at the back

of the receiver to the corresponding input connectors on your TV set. Cable included.

3. For Component; connect the Y, Pb, Pr with Audio Left and Right RCA connectors to the

corresponding inputs on your TV receiver. The RCA leads included can be used for

this task.

4. For HDMI; connect the HDMI connector at the back of the receiver to a HDMI input on

your TV set. HDMI cable must be purchased separately.

2.4.3 Connecting to a Digital Audio Amplifier

Connect SP/DIF RCA output connector at the back of your receiver to a corresponding

digital audio decoder input.

2.5 Start Up

Once your receiver is connected, switch the power to the receiver and TV on and prepare to

scan and install.

1. Welcome frame will appear On Screen.

2. Press the【OK】key to start scan. As each channel is found, “OK” appears next to it.

Channel (or Mux) contents appear at the top of the OSD panel. (Duplicate

channels from secondary transmitters will display in the channel list with a 3rd

number.) Default parameters set your receivers output at 576i so a picture will

show on any TV. To select higher resolution press the【V.F.】key or select via Main

Menu, System Set Up, TV System, Video Resolution. Press 【EXIT】,【EXIT】,

【EXIT】to return to normal operation.

3. Main Menu

Your receiver contains a unique user interface

designed to simplify access to functions.

To Operate:

zPress the【MENU】key to display the main

menu (when in TV/Radio mode).

The default “Edit Channel” with Screen icon or last Sub-Menu used appears.

zPress the【】or【】keys to move up or down to your selection.

zPress the【OK】key to go to sub-level of selected menu item.

zPress the【】or【】keys again to move up or down to your selection.

zPress the 【】,【】,【◄】or【►】and【OK】keys to activate your selection.

zPress the【EXIT】or【MENU】keys to

exit and close all menus.

4. Edit Channels

In the Main Menu, press the【】or【】keys to

select the “Edit Channel” icon. Press the

【OK】,【◄】or【►】keys to highlight “TV Channel

List”, “Radio Channel List” or “Delete All”

items.

4.1 TV Channel List

You can Lock, Skip, Move or Edit channels

in the “TV Channel List” or “Radio Channel

List” Menu.

4.1.1 FAV Favourite Channels

From Edit Channel “TV Channel List”

menu, press 【OK】to enter “All Channel”

sub-menu.

Press the Grey【FAV】key to enter the TV Channel List. “FAV” icon jumps up to confirm.

Press【】or【】to select a channel. Press

the【OK】key to display the Favourite group

list. Press 【】or【】keys to select a

Favourite group, and press the【OK】key to

confirm. Press 【EXIT】,【EXIT】,【EXIT】.

Receiver asks “Are you sure to save?” to

which you reply “YES” by pressing the【OK】

key.

4.1.2 Lock

In Edit Channel “TV Channel List” “All

Channel” sub-menu, select a channel to

Lock by pressing the 【】or【】keys.

Then press the “RED” RCL key and 【OK】.

Receiver prompts you to “Input Password”.

When entered press【OK】again to enable

Lock. If 【OK】is pressed again the

selected channel is unlocked.

4.1.3 Skip

From Edit Channel “TV Channel List” All

Channel sub-menu, select a channel to

Skip by pressing the 【】or【】keys.

Press “GREEN” PAUSE key and【OK】key

to skip. Press 【EXIT】, 【EXIT】, receiver

prompts “Are you sure to save?” Press

【OK】to finalize Skip channel.

4.1.4 Move

In Edit Channel “TV Channel List” All Channel

sub-menu, select a channel to Move by pressing

【】or【】keys. Press “YELLOW” SUB key and

【OK】key to mark it. Press the 【】or【】keys

to move this channel to the position where you

want to move it to. Press the 【OK】key to

execute Channel Move.

4.1.5 Edit

From Edit Channel “TV Channel List” All Channel

sub-menu, press the “BLUE” TEXT key to enter the

Edit sub-menu. From here you can:

zSort channels by pressing “RED” key.

zEdit rename with the “GREEN” key.

zDelete with “BLUE” and “OK” keys.

4.2 Delete All

From the “Edit Channel” menu, press 【】or【】

keys to select “Delete All”, and press【OK】key.

Receiver prompts “Warning! Do you really want to

delete all channels?” Press【◄】or【►】keys to select

“YES” and【OK】to action.

5. Installation

From Main Menu, press【】or【】keys to select

the “Installation” Sub-Menu and icon. Here

you can select ”Auto Scan”, ”Channel Scan”,

“Aerial Adjustment” and “LCN”.

Tabla de contenidos

Otros manuales de Receptor de TV de healing

healing

healing HHT894 Manual de usuario

healing

healing HHM897 Manual de usuario

healing

healing HHH640 Manual de usuario

Manuales populares de Receptor de TV de otras marcas

NEC

NEC PX-TUAN-01 Manual de usuario

Edision

Edision Piccollino Manual de usuario

Matsui

Matsui DTR1 Manual de usuario

Dyon

Dyon Raptor Manual de usuario

Strong

Strong SRT 2401 Instrucciones de funcionamiento

TerraTec

TerraTec CINERGY DT USB XS DIVERSITY Manual de instrucciones

Haier

Haier 34F9K Manual de usuario

TechniSat

TechniSat DigiCom 1 Manual de usuario

Haier

Haier LT19A1 Manual de usuario

Triax

Triax CR 317 Manual de usuario

DirecTV

DirecTV D10-300 Manual de usuario

Motorola

Motorola VIP2502W Manual de usuario

ActionTec

ActionTec WirelessTV Manual de usuario

Motorola

Motorola VIP1200 Series Manual de usuario

Xoro

Xoro HRT 1300 Manual de usuario

Motorola

Motorola DH6200 Manual de usuario

Manhattan

Manhattan Plaza DS-100 Manual de usuario

Micro Prose

Micro Prose MPI-500 Manual de usuario

healing HHT895 Manual de usuario

Manuales populares de Receptor de TV de otras marcas