HDFury NEW-HDF0090-1 Manual de usuario

4K Integral

User Manual 4K Integral Rev 1.4

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

Table of Contents

Overview …...................................................................................................... 3

Connecting Cables …........................................................................................ 4

Power Status/LED ….........................................................................................5

Reset HPD/Factory Default…...........................................................................6

EDID Mode Selection .......................................................................................7

CEC Trigger Button ………..................................................................................8

Input Switching and Matrix Mode...................................................................9

HDCP Settings………………………..…………………………………………………………………….10

Audio Settings…............................................................................................... 11

Combo RST + INP to select Custom EDID........................................................ 12

List of Custom EDID available..........................................................................13

Backside Sticker............................................................................................... 14

Selecting the Windows PC driver for USB GUI and Firmware Update......……15

Update the Integral Firmware with a Windows PC...................................……16

Integral USB GUI for Windows PC..............................................................……19

Integral Total Control APP............................................................................... 30

Frequently Asked Questions (FAQ) ................................................................ 32

Specifications................................................................................................... .36

Certifications.................................................................................................... 40

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

Overview

The HDfury team would like to thank you personally for purchasing the 4K Integral!

This unique HDMI2.0a and HDCP2.2 device supports true full 4K60 4:4:4 600MHz 18Gbps bandwidth

signals. It will allow you to solve any HDCP error, Split any SD/HD/Full HD/4K or PC signals up to

600MHz, replace or extract HDMI audio, Input CEC commands, Update and switch between multiple

edid banks, work as a Matrix, Inject Infoframe and more. Control can be completed with IR codes,

through slide switch or push buttons on the unit, via a wired USB connection to a Windows PC or

through wireless Bluetooth connection with any Smartphone or Tablet running Android or iOS.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

Connecting Cables

To use your 4K Integral:

• Connect a HDMI input cable to the HDMI input.

• Connect a HDMI output cable to the HDMI output.

• Connect the Integral power supply.

• Connect any additional HDMI input/output cable or any audio input /output cable (optional).

As shipped, the Integral defaults to HDCP1.4 on the Bottom output port. Top Output port can be

configured to any HDCP revision. Make sure that you are using 600MHz certified HDMI 4K cable if you

plan to set up a 4K60 4:4:4 600MHz 18Gbps link in your setup.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

Power/Status LED

The Integral logo will glow Green when in use. When the Integral first receives an HDMI signal the logo

will quickly turn on, then off, and then on permanently to indicate that the HDCP handshake has been

completed.

The status of the green logo may be used for troubleshooting:

[Logo OFF]: Insufficient power or no incoming signals. Use the Integral power supply, make sure

the source and sink devices are correctly connected and ON.

[Logo BLINKING] (ON for split second, OFF for 5 seconds): The Integral is receiving power and is

ready to accept an HDMI signal.

[Logo ON]: The Integral is powered and receiving and decoding a HDMI signal.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

Reset HPD (Short Press) or Reset to factory default (Long Press)

The 4K Integral offers 2 functions per push button.

[Short Press] on Reset Button will generate Hot Plug Detection event.

[Long Press] (over 10s for security) will reset the Integral to factory default.

Note: You can also Reset the unit or perform any others control with IR codes, from the USB GUI for

Windows PC or via smartphone/tablet APP for Android and iOS.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

EDID Mode Selection

EDID slide switch has 3 positions.

Switch should be set to middle position to allow control via USB, IR or Bluetooth device.

[Automix Mode]: Create EDID based on mutual least capabilities so both displays will always show a

picture and audio. You can access advanced options of the Automix mode via the GUI for Windows PC

and Android/iOS APP.

[Custom Use / BT]: Pick and use EDID from a selection of preloaded EDID tables (see p.13) or load any

EDID bank of your choice. By default the selected EDID table is a 4K30 4:4:4 300MHz with Full Audio

capabilities. Leave the slide in this position to allow remote control via USB/IR or Android/iOS APP

and/or to pick and use any of the 25 different EDID tables available (see p.13 for the full list).

[Fixed EDID with L/R Audio]: This mode is a 1080p60 2channel stereo basic table. It can be used as a

security EDID to ensure a picture in every setup/situation.

Note: You can also switch EDID mode and any others control with IR codes, from the USB GUI for

Windows PC or via smartphone/tablet APP for Android/iOS.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

CEC Trigger Button

CEC Trigger Button allows you to send two custom CEC commands on the HDMI/CEC network.

Integral TOP output port is the CEC master output.

[Short Press] on CEC Trigger Button will send CEC1 command.

[Long Press] (over 2sec) on CEC Trigger Button will send CEC2 command.

By default CEC1 is 0F:04 (Display View On, it will turn ON HDMI/CEC capable unit)

By default CEC2 is 0F:36 (Standby, it will turn OFF HDMI/CEC capable device)

Note: To send LIVE CEC commands or to update the default CEC commands please refer to the USB GUI

software for Windows PC at page 15 or the smartphone/tablet APP for Android and iOS at page 17.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

Input Switching and Matrix mode

Input Switch / Matrix Mode Button allow you to switch active inputs or enter/exit the Matrix mode.

[Short Press] will switch the active input channels in Splitter Mode and swap/cross signals in Matrix

mode.

[Long Press] (over 2sec) will enter/exit the Matrix Mode (only available for signals up to 4K30 4:4:4

300MHz or 4K60 4:2:0 300MHz).

Blue LEDs on the unit will show the active input channel (when one LED is ON) or Matrix Mode (when

both LEDs are ON).

Note for Matrix Mode:

It is only available for signals up to 300MHz (max 4K30 4:4:4 or 4K60 4:2:0).

Input in this mode is limited to one HDCP 2.2 stream; the other must be HDCP 1.4 or DVI-D.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral –User Manual

HDCP Settings

HDCP slide switch has 3 positions.

The switch should be set to the middle position to allow control via USB, IR or a Bluetooth device.

[HDCP 2.2 Mode]: In this mode you always have HDCP 2.2 on the TOP output port and HDCP 1.4 on

bottom output port.

[HDCP Auto / BT]: In this mode the Integral unit makes sure that the conversion will always output a

working signal. The bottom output is always HDCP 1.4 but the top output is dynamic.

[HDCP 1.4]: In this mode, you always have a HDCP1.4 signal on both output ports.

Note on HDCP:

Both inputs accept HDCP1.4/2.2. Both outputs can work with HDCP1.4/2.2 devices.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Reproductor de DVD de otras marcas

Sony

Sony DVP-F11 Manual de usuario

Philips

Philips DVP3560K/F8 Manual de usuario

LENCO

LENCO DVP-740 X2 Manual de usuario

JVC

JVC XV-N650BEU Manual de usuario

Aiwa

Aiwa XD-DV370 Manual de usuario

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Manual de usuario

Denon

Denon DVM-1805 - DVD Changer Manual de usuario

Toshiba

Toshiba SD-3815 Manual de usuario

Tevion

Tevion 44330 Manual de usuario

Samsung

Samsung DVD-HD860 Manual de usuario

Sylvania

Sylvania DP170SL8 Manual de usuario

Toshiba

Toshiba SD-P1200 Manual de usuario

JVC

JVC XV-D9000E Manual de usuario

Dolby Laboratories

Dolby Laboratories CP650 Manual de usuario

Philips

Philips DVD737K/931 Manual de usuario

Denon

Denon DVD-5900 Manual de usuario

Philips

Philips DVD 951 Manual de usuario

Philips

Philips DVDR3460 Manual de usuario