HDanywhere XTND4K14140TPC Manual de usuario

Revision 1: 28/08/20

XTND 4K (40) TPC Splitter (1x4+1)

CODE: XTND4K14140TPC

Product Guide (English UK)

Help is only an email away: [email protected].

Contents

Contents, Glossary of terms 2-3

In the box, Features 4-5

Specications 6-7

XTND 4K (40) TPC Splitter (1x4+1) transmitter description 8-9

XTND 4K (40) TPC Splitter (1x4+1) receiver description 10-11

EDID switch positions & connecting over USB 12-13

IR (Infrared) control, Testing IR works 14-15

Cabling 16-17

Example wiring diagram, Power up sequence 18-19

2 Year Product Guarantee 20-21

Conformity, Hire a HDA Pro 22-23

Glossary of terms

Extended Display Identication Data

(EDID)

EDID comes from your display and is bundled in with HDMI picture and audio data. EDID tells

the HDMI source what resolution the display can handle and what audio format it can play. EDID

is not normally an issue when connecting a source directly to display. However, in distributed

XTND environments, the XTND device can receive different EDID messages from the displays it

is connected to. To x EDID see page 12.

IR RX & IR TX Infrared (IR) Receiver (RX) and Transmitter (TX). The RX ‘receives’ a signal from another remote

control and the TX ‘transmits’ it. (See page 14)

Tipping Point Compression (TPC) HDA makes transmission of 18Gbps content possible using TPC. Visually lossless, TPC only

becomes active if the source output threshold is breached, hence the term tipping point.

XTND transmitter Part of the XTND pair. The XTND transmitter takes a HDMI signal and converts it into a format

which can be carried over Cat cable. The transmitter is installed at the source end of the setup.

XTND receiver Part of the XTND pair. The XTND receiver takes the signal made by the XTND transmitter and

converts it back to HDMI so that it can be connected to a display.

Help is only an email away: [email protected].

x1 XTND 4K (40) TPC Splitter (1x4+1) Transmitter

x4 XTND 4K (40) TPC Splitter (1x4+1) Receiver

x1 Infrared Transmitter cable (1.5m) (IR TX)

x4 Infrared (20-60Khz) Receiver cable (1.5m) (IR RX)

x1 12V 2.5A Power Supply with adapters (UK,EU,US,AU)

x5 Mounting Kits

x1 User Manual

Name: XTND 4K (40) TPC Splitter (1x4+1)

Product code: XTND4K14140TPC

In the boxIMPORTANT

For optimum performance and safety, please read these instructions

carefully before connecting, operating or conguring this product.

Please keep this manual for future reference.

Surge protection is recommended

This device contains sensitive electrical components that may

be damaged by electrical spikes, surges, electric shock, lightning

strikes, etc. The usage of surge protection systems is recommended

in order to protect and extend the life of your system.

Features

Supports 18Gbps bandwidth and video picture formats up to 4K@60Hz (4:4:4) including HDR and Dolby Vision*

Includes local HDMI loop out

4K up to 40m (131ft)

Digital audio support up to and including Dolby Atmos and DTS:X

Audio extraction over coax & stereo (source audio only - no downmix).

Backwards IR

EDID management

Power over Cable

*Only Dolby Vision Low Latency Mode is supported at 60Hz

Help is only an email away: [email protected].

HDMI version HDMI 2.0b

HDCP compliance HDCP 2.2 & HDCP 1.4

Video bandwidth 18Gbps

Video resolution Up to 4K@60Hz (4:4:4)

Colour space RGB, YCbCr 4:4:4, YUV 4:4:4, YCbCr 4:2:2/4:2:0

Colour depth 8-bit, 10-bit, 12-bit (1080p@60Hz)

8-bit, 10-bit, 12-bit (4K@60Hz)

8-bit (4K@60Hz 4:4:4)

HDR formats HDR10, HDR10+, Dolby Vision*, HLG

Video & audio I/O Input: x1 HDMI

Outputs: x4 Cat, x1 HDMI (Mirror), x1 3.5mm Stereo Jack, x1 Digital Coax

Transmission distance 1080p 60m (196ft)

4K 40m (131ft)

HDMI audio formats PCM 2.0 / 5.1 / 7.1, Dolby Digital / Plus / EX / True HD / Atmos, DTS, DTS-EX, DTS-96 / 24, DTS High

Res, DTS-HD Master Audio, DTS-X

Coax audio formats PCM 2.0, Dolby Digital / Plus / DTS 2.0 /5.1

Stereo audio formats PCM 2.0

Specications

Infrared 20Khz - 60Khz

ESD protection ±8kV (Air-gap discharge)

±4kV (Contact discharge)

Power consumption 14W (Maximum)

Power supply 12V 2.5A

Operating temperature 0°C - 40°C / 32°F - 104°F

Storage temperature -20°C - 60°C / -4°F - 140°F

Relative humidity 20 - 90% (Non-condensing)

Housing Steel

Colour Grey (Carbonite)

Dimensions (W/D/H) mm Transmitter: 210 x 100 x 25

Receiver: 88 x 61 x 18

Weight Transmitter: 617g

Receiver: 155g

Package weight 1900g

*Only Dolby Vision Low Latency Mode is supported at 60Hz.

A B C D

Source (IN)Coax / Stereo (OUT) HDMI (OUT)IR (OUT) DC12V

Video

EDID

Help is only an email away: [email protected].

Transmitter Diagram

6 7 10

95 8

2 3 4

1. Power Switch: Turns the XTND on/off.

2. Power: Indicator light. If this light is on and solid then the XTND has power.

3. HDMI Status: The left light indicates an active HDMI source is connected if on. The right light indicates an active display is connected

if on.

4. Video Status (A-D): Indicator light. If this light is on then the XTND Receiver is connected to an active display.

5. Coax / Stereo (OUT): HDMI source audio extraction ports. These ports do not downmix HDMI audio.

6. Source (IN): HDMI video input.

7. HDMI (OUT): HDMI video output.

8. VIDEO TPC: Cat (RJ45) video output port. 18Gbps video will pass through using TPC. The port has two indicator lights. Left light: solid

means connection between XTND transmitter and XTND receiver is good. Off means that there is no connection detected. Right light:

solid means a signal is being transmitted. Off means no signal is detected.

9. IR (OUT): Connect an IR TX to this port to enable remote (IR) control of any AV device local to the XTND transmitter.

10. DC12V: Connect the supplied power supply to this port to provide power to the XTND transmitter and receiver(s).

11. Service: Micro USB port to update XTND rmware and adjust EDID settings for serial (page 13)

12. EDID: Five dip switches which can be used to set EDID operating mode for the XTND (page 12). Each switch has two positions “UP”

or “DOWN”. UP = 1. DOWN = 0.

Description

Help is only an email away: [email protected].

Receiver Diagram

IR DC12V

HDMI (OUT)

Video

Tabla de contenidos

Otros manuales de Convertidor de medios de HDanywhere

HDanywhere

HDanywhere MHUB2K14 Manual de usuario

HDanywhere

HDanywhere DOLBY & DTS AV SIGNAL MANAGER Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario