Hayter Ranger 53 Pro Guía del usuario

English Version

FROM SERIAL NO: 396A001001 HANDBOOK: 396007 (REV.0.)

ISSUE 10.04.02

RANGER 53 PRO

CODE 396A

OWNER’S HANDBOOK

Direttore Generale

Alberto Cattaneo

VIBRATION INFORMATION

Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the

handlebars. CODE 396A (SG56 RC VAR PROF) = 12 ms-2...

EC DECLARATION OF CONFORMITY

SANDRIGARDEN

via Manzoni 22

36027 Rosa, Italia.

Declare that the lawnmower:

Models: Ranger 53 Pro

Machine Type No. CODE 396A (SG56 RC VAR PROF)

Category: Auto Drive/Variable Speed

Type: Pedestrian Rotary

Engine - Manufacturer: Briggs & Stratton

- Speed of rotation: 2900rpm

Width of cutting device: 520mm

Speed of rotation of the cutting device: 2900rpm

Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the

Design & Construction of Machinery and Safety Components.

Also Directive 89/336/EEC amended by 92/31/EEC Electromagnetic Compatibility.

Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors. (ANNEX VI)

Notified Body: NOVICOM SAS DI R. CASTELLI & CO. Via della Fontana 23804 Monte Marenzo (LC)

Notified body identification No: 0723

Measured sound power level: 98 dB(A)

Guaranteed sound power level: 100 dB(A)

Standards Used: EN292, EN836 and ENISO14982.

Authorised Signatory:

Signed Date: 10.04.02

Technical documentation kept at:

SANDRIGARDEN,

via Manzoni 22,

36027 Rosa, Italia.

396007AMT1004020

1.11.1 CONTENTS

Page No.

CONTENTS

INTRODUCTION.

WARRANTY.

SAFETY PRECAUTIONS.

Decals

SPECIFICATIONS.

ASSEMBLY INSTRUCTIONS.

General assembly.

Assembling the mower for the first time.

STARTING THE ENGINE.

Before starting the engine.

Starting the engine.

STOPPING THE ENGINE.

OPERATING THE MOWER.

Height of Cut.

Travel.

Turning the mower.

Mowing with grass collection.

Mowing without grass collection.

Heavy growth.

Moving the mower across non-grassed areas

Cutterbar operation.

Mowing and grass care tips.

MAINTENANCE.

Engine.

Grassbag.

Deck housing.

Securing nuts and bolts.

Lubrication.

Clutch cable adjustment.

Cutterbar.

Maintenance Schedule.

PREPARING THE MOWER FOR STORAGE.

FAULT FINDING.

396 PARTS LIST.

396 PARTS DIAGRAM.

ENGINE ANCILLARY PARTS

NOTES.

CUSTOMER INFORMATION.

1.2

1.3

1.4 - 1.7

1.7

1.8

1.9

1.10 - 1.12

1.13

1.13 - 1.14

1.15

1.16

1.17

1.18

1.19

1.20

1.21

1.21 - 1.22

1.23

1.24

1.25 - 1.26

1.27 - 1.28

1.29

1.30 - 1.31

2.1 - 2.4

2.5

2.6

2.7

2.8

396007AMT1004020

1.21.2

INTRODUCTION

Thank you for purchasing a Hayter mower. The following pages are designed to help you

gain safe and efficient service from your machine.

IMPORTANT: This Owners Handbook should be regarded as part of the machine as it

gives essential information regarding machine safety, operation, maintenance and

specifications. Read and understand this handbook prior to operating your machine for the

first time. Make sure you are familiar with all the controls and points of regular maintenance.

If you have any doubts, consult your Hayter authorised dealer who will be pleased to give

you assistance.

The mower is designed solely for use in a domestic grass cutting environment. Use in any

other way is considered as contrary to the intended use. Compliance with and strict adherence

to the conditions of operation, service and repair as specified in this handbook also constitute

essential elements of the intended use.

This mower should be operated, serviced and repaired only be persons who are familiar with

its particular characteristics and who are acquainted with the relevant safety procedures. The

safety precautions listed herein and all other generally recognised regulations on safety must

be observed at all times.

All Hayter mowers are robustly constructed and designed for efficient economical

performance under normal mowing conditions. Correct operation and maintenance will

ensure a long and satisfactory service life. Prior to despatch from our factory every effort is

made to ensure your machine arrives in perfect condition. Your dealer will carry out a

pre-delivery inspection to ensure that there has been no transit damage prior to installation.

Please allow your dealer to familiarise you with the controls and safety features of the

machine during installation.

Throughout this handbook all references to left hand and right hand are as viewed from

behind the handlebar, facing in the direction of forward travel.

This owners handbook is based on information available at the time of publication.

HAYTER LIMITED reserve the right to make changes at any time without notice.

INTRODUCTION

396007AMT1004020

1.31.3 WARRANTY

LIMITED WARRANTY

Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in

material and workmanship under normal use and service for a period of one year from the date of

purchase. The manufacturers of the engine furnish their own warranty and services are provided

through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full

benefit of the warranty, the warranty registration card must be returned within 60 days of

purchase. Subject to the conditions and exlcusions noted in this limited warranty, we shall at our

option, repair or replace any warranted part during the applicable period. If you are in doubt or

experience any difficulty, please consult a Hayter Authorised Service Dealer for clarification.

A 90 day warranty period applies to those items which are subject to normal wear and tear e.g.

wheels, cutterbars, cables, grassbags and other consumable wearing parts.

All machines which are fitted with a genuine Hayter friction disc or crankshaft support bearing as

original equipment before use, are covered by a Lifetime Warranty against the engine crankshaft

bending. Note: friction washers, blade brake units and other such devices are not applicable. Only

machines fitted with a genuine Hayter friction disc or crankshaft support bearing, which are used

in accordance with the recommended operating and maintenance procedures, are covered.

This warranty does not apply to any unit that has been tampered with, altered, misused, abused or

used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does

not cover for minor mechanical adjustments unless they are due to defective material or

workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for

assistance when making these adjustments.

To make a warranty claim, return the unit to a Hayter Authorised Service Dealer along with proof

of purchase stating the machine serial number and date of purchase. Subject to the conditions and

exclusions in this limited warranty, the authorised dealer will, at our option, repair or replace any

warranted part within the duration of the warranty period.

This limited warranty gives you specific legal rights and is in addition to any statutory rights to

which you may be entitled and your statutory rights are not affected by this warranty. If you need

additional information concerning this written warranty, or assistance in obtaining services,

please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford,

Hertfordshire CM23 4BU

UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages or

contact:- Freephone 0800 616298.

SAFETY PRECAUTIONS

Training:

Read the instructions carefully. Ensure that you are familiar with the controls and the proper

use of the equipment. Learn how to stop the mower quickly in an emergency.

Never allow children or people unfamiliar with these instructions to use the mower.

Never mow while people , especially children, or pets are nearby.

Keep in mind that the user is responsible for accidents or hazards occurring to other people

or their property.

Preparation:

While mowing, always wear substantial footwear and long trousers. Do not operate the equip-

ment when barefoot or wearing sandals.

Thoroughly inspect the area where the mower is to be used and remove all objects which may

be thrown by the machine.

WARNING: Petrol is highly flammable.

-Store fuel in containers specifically designed for this purpose.

-Refuel outdoors only and do not smoke while refuelling.

-Add fuel before starting the engine. Never remove the cap from the fuel tank or add petrol

while the engine is running or when the engine is hot. Allow engine to cool for at least 2 min-

utes before refuelling.

-Do not attempt to start the engine if petrol is spilled or a smell of petrol is present but move

the mower away from the area of spillage and avoid creating any source of ignition until petrol

vapours have dissipated.

- Always use fresh fuel. Stale fuel can block the carburettor and cause leakage.

The Ranger 53 Pro is perfectly safe if used correctly. Failure to observe the

following simple precautions may result in serious injury.

THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED.

WHEN YOU SEE THIS SYMBOL BE ALERT TO THE POSSIBILITY OF

INJURY. CAREFULLY READ THE MESSAGE THAT FOLLOWS AND

INFORM OTHERS. EXERCISE GREAT CARE AND FOLLOW THE

ADVICE GIVEN TO AVOID POTENTIALLY HAZARDOUS SITUATIONS.

1.41.4

396007AMT1004020

1.51.5 SAFETY PRECAUTIONS

SAFETY PRECAUTIONS Continued.

Operation:

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can

collect.

Mow only in daylight or good artificial light.

Avoid using the mower on wet grass, where feasible.

Always be sure of your footing on slopes.

Walk, never run.

Mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction on slopes.

Do not mow excessively steep slopes.

Use extreme caution when reversing or pulling the mower towards you.

Stop the engine if the mower has to be tilted for transportation when crossing surfaces other

than grass and when transporting the mower to and from the area to be mowed.

Never operate the mower unless the guards are securely in position and in good condition.

Do not change the engine governor settings or overspeed the engine.

Disengage the drive clutch before starting the engine.

- Replace all fuel tank caps and fuel container caps securely.

- Replace faulty exhaust and mufflers.

Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts

and screws for tightness. Use only genuine Hayter replacement parts.

Damaged cutterbars and loose fixing bolts are major hazards. Before use, visually inspect the

cutting mechanism to ensure that it is in good condition. A damaged cutterbar must be replaced

immediately with a genuine Hayter replacement part. Cutterbars which are slightly worn can

be resharpened. Ensure that both cutting edges are resharpened equally to maintain balance.

An unbalanced cutterbar may cause serious damage to your machine.

Refer to "Maintenance."

SAFETY PRECAUTIONS

Operation continued:

Start the engine carefully, with feet well away from the cutterbar.

Do not tilt the mower when starting the engine.

Do not put hands or feet near or under rotating parts.

Never pick up or carry a mower while the engine is running.

Stop the engine and disconnect the spark plug lead:

- Before clearing blockages or unclogging the discharge chute.

- Before cleaning/checking or working on the mower.

Stop the engine:

Do not lift the rear deflector whilst the mower is in operation.

- Whenever you leave the mower.

- Before refuelling.

- After striking a foreign object. Inspect the mower for damage and make repairs

before restarting and operating the mower.

- If the mower starts to vibrate abnormally ( check immediately ).

WARNING: THE CUTTERBAR CAN CONTINUE TO ROTATE

AFTER THE ENGINE IS SWITCHED OFF.

SAFETY PRECAUTIONS Continued.

1.61.6

396007AMT1004020

1.71.7 SAFETY PRECAUTIONS

SAFETY PRECAUTIONS Continued.

Maintenance and storage:

Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.

Never store the mower with petrol in the tank within an enclosed area where fumes may reach

an open flame or spark.

Allow the engine to cool before storing in any enclosure.

To reduce the fire hazard, keep the engine, silencer, and petrol storage area free of grass,

leaves, or excessive grease.

Check the grassbag frequently for wear or deterioration.

Replace worn or damaged parts for safety. Use genuine Hayter parts only.

If the fuel tank has to be drained, it is essential that this be done outdoors.

DECALS

WARNING DECAL:

DANGER OF BEING HIT BY THROWN OBJECTS.

KEEP BYSTANDERS AT A SAFE DISTANCE

FROM THE MACHINE.

WARNING - CAUTION RISK OF DANGER - SAFETY ALERT.

DANGER OF SEVERING TOES OR FINGERS

IN CUTTING MECHANISM.

STOP ENGINE AND REMOVE SPARK PLUG LEAD BEFORE

PERFORMING MAINTENANCE OR REPAIR WORK.

CAREFULLY READ THE OPERATORS MANUAL BEFORE

USING THE MACHINE.

DECAL :

HEIGHT OF CUT ADJUSTMENT

DECAL:

ENGINE STOP

DECAL: GROUND SPEED DECAL: THROTTLE CONTROL

Briggs & Stratton Intek Edge 60

121602-0166-E1

2900 rpm

Unleaded petrol.

1.5 litres

SAE 30 engine oil

0.6 litres

530mm

25 - 100mm

1700 x 600 x 1130mm

57.5 Kg

SPECIFICATIONS

Engine

Engine type

Engine / cutterbar speed

Fuel type

Fuel capacity

Oil type

Oil sump capacity

Cutting width

Cutting height

Overall dimensions

Dry Weight

CODE 396(SG56 RC VAR PROF)

MODELS

1.81.8

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cortacésped de Hayter

Hayter

Hayter Harrier 48 Pro Guía del usuario

Hayter

Hayter CODE377A Manual de usuario

Hayter

Hayter Ranger 41 Push Guía del usuario

Hayter

Hayter R324T Manual de usuario

Hayter

Hayter H15/40 145S Manual de usuario

Hayter

Hayter Harrier 41 Electric Guía del usuario

Hayter

Hayter Harrier 48 BBC Guía del usuario

Hayter

Hayter Harrier 48/56 Pro 496G Guía del usuario

Hayter

Hayter Spirit 41 617J Guía del usuario

Hayter

Hayter Harrier 56 BBC Guía del usuario

Hayter

Hayter Harrier 41 410G Guía del usuario

Hayter

Hayter E131B Manual de usuario

Hayter

Hayter Harrier 48 BBC Guía del usuario

Hayter

Hayter 481A Guía del usuario

Hayter

Hayter Envoy Code 100C Guía del usuario

Hayter

Hayter Harrier 56 BBC Guía del usuario

Hayter

Hayter Motif 432A Guía del usuario

Hayter

Hayter Harrier 41 Electric Guía del usuario

Hayter

Hayter Harrier 56 Autodrive VS ES B & S Manual de usuario

Hayter

Hayter Harrier 48 Autodrive VS Manual de usuario

Hayter

Hayter M10/30 Manual de usuario

Hayter

Hayter Condor RATCHET DRIVE 511R Manual de usuario

Hayter

Hayter Hayterette Guía del usuario

Hayter

Hayter MT313 Manual de usuario

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

MTD

MTD 795, 792, 791, 790 Manual de usuario

Toro

Toro Groundsmaster 3505-D Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

MTD

MTD 126-220-000 Manual de usuario

Toro

Toro 74806 Manual de usuario