Haws 7611 Guía

05/19 Model 7611 Page 1 of 5

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: [email protected]  website: www.hawsco.com

No. 0002080063 (11)

Model 7611

Eye/Face Wash

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material or poor

workmanship for a period of one year from date of shipment. HAWS liability under this

warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any

goods, or part thereof, which shall appear to the Company upon inspection to be of

defective material or not of first class workmanship, provided that claim is made in writing

to Haws within a reasonable period after receipt of the product. Where claims for defects

are made, the defective part or parts shall be delivered to the Company, prepaid, for

inspection. HAWS will not be liable for the cost of repairs, alterations or replacements, or

for any expense connected therewith made by the owner or his agents, except upon

written authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages

caused by defective materials or poor workmanship, except for replacements, as provided

above. Buyer agrees that Haws has made no other warranties either expressed or implied

in addition to those above stated, except that of title with respect to any of the products or

equipment sold hereunder and that HAWS shall not be liable for general, special, or

consequential damages claimed to arise under the contract of sale.

The emergency equipment manufactured by HAWS is warranted to function if installation

and maintenance instructions provided are adhered to. The units also must be used for the

purpose for which they were intended. This product is intended to supplement first-aid

treatment. Due to widely varying conditions, Haws cannot guarantee that the use of this

emergency equipment will prevent serious injury or the aggravation of existing or prior

injuries.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED

OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

05/19 Model 7611 Page 2 of 5

LOCATION OF UNIT: The Model 7611 Eye/Face Wash should be installed in close

proximity to potential accident areas. It should be clearly identified free from

obstructions and easy to access.

SUPPLY LINE: The minimum recommended line size is 1/2" IPS with 30-90 psi (2-6

ATM) flowing line pressure. Where sediment or mineral content is a problem, an inlet

filter is recommended.

PLUMBING CONNECTIONS: Inlet supply is 1/2" O.D. slip joint.

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

No flow.

Check the main shut-off valve.

Insufficient water flow.

Verify minimum 30 psi flowing supply

line pressure.

Probable clogging of flow control due

to inadequate line flushing. Unscrew

eye/face wash head and remove the

four screws to disassemble head.

Clean flow control and reassemble

head.

Eye/face wash stream does not

meet desired eye level.

Possible blocked flow control, see

above solution.

Possible non-leveled eye/face wash

assembly.

INSTALLATION INSTRUCTIONS

Refer to installation drawing to clarify installation procedure.

Note: Model 7611 Eye/Face Wash can be mounted on either right or left side of the

sink. For left hand use, reconfigure as shown on installation drawing.

STEP 1: Remove the 3" O.D. flange from valve body.

STEP 2: Remove the protective backing from rubber washer.

STEP 3: After making sure that bottom surface of the counter top or deck, around

the drilled hole is clean and free of grease, slide valve through drilled hole

from the bottom.

STEP 4: Place sign over valve.

STEP 5: Reinstall the 3" O.D. flange, ensure that the top surface of flange is flush

with valve. Wrench tighten locknut against base of counter or deck.

STEP 6: Install eye/face wash assembly to valve and after checking for proper

alignment, tighten the setscrew on the cap.

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

PARTS BREAKDOWN

1E/F WASH AXION

VALVE ASSEMBLY

EYEWASH SIGN

SWING AWAY SIGN

5TEST TAG

REPAIR KIT

VRK7650

SP170

SP175

0005240025

0002953160

APPROVED

DRAWN

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BYECN NO.

PAGE

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ITEM DESCRIPTION

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

PART NO.

STH

10/21/96

0002080063

7611

1:1

05/30/19

3 of 5

PARTS BREAKDOWN

5400

2019

OFF

6"(152mm) MIN.

CLEARANCE 3-1/4"

83mm

1-3/4"

45mm

10"

254mm

4-7/8"

124mm

1/2" O.D. SUPPLY

(BY OTHERS)

SUPPLY SHANK CAN BE

POSITIONED IN ONE OF

FOUR DIRECTIONS 90°

APART BY LOOSENING

THE CAP SET SCREW

AND ROTATING VALVE

1-5/8"

41mm

MAX. DECK

THICKNESS

CLEARANCE RADIUS

SINK

(REFERENCE)

DRILL ONE Ø1-3/8" [35mm] HOLE

WHERE UNIT IS TO BE INSTALLED.

FLANGE

SIGN

VALVE

CAP SET SCREW

LOCKNUT

RUBBER WASHER

D-NOTCH WASHER

INSTALL SO THAT EYEWASH HEAD

IS OVER SINK WHEN ACTIVATED.

SET SCREW

LEFT HAND

MOUNTING LOCATION RIGHT HAND

MOUNTING LOCATION

1. SPECIFIES EYEWASH NOZZLE HEIGHTS

THE ANSI Z358.1-2009 STANDARD

NOTES:

TO BE 83.8cm (33 IN.) TO

114.3cm (45 IN.) ABOVE THE FLOOR

4. ±1/2" [6.4mm].

THESE DIMENSIONS MAY VARY

MIN. CLEARANCE TO SINK EDGE

LEFT HAND APPLICATION

SIGN

Left Hand Right Hand

FLIP OVER

MOVE

SET SCREW

SUPPLY

SHANK

SPOOL FOR CAP

INDENTATION IN

SET SCREW

3-5/8"

92mm &

127mm

MIN.CLEARANCE

RADIUSFOR

FACEWASHSTREAMS

AND15.2cm(6IN.)MINIMUMFROM

WALLORNEARESTOBSTRUCTION.

OPPOSITESIDE

SEALBASEWITH

SILICONECAULK

(BETWEENBOTTOMOF

SIGNANDCOUNTERTOP)

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

PAGE

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

STH

10/96

0002080063.D

7611

8:1

05/30/19

2065

4 OF 5

INSTALLATION

5400

2019

BE SURE SIGN IS ON PROPER SIDE

BE SURE TOP SURFACE OF FLANGE

BE SURE PROTECTIVE BACKING

D-NOTCH LOCKNUT

IS REMOVED FROM RUBBER WASHER

IS FLUSH WITH VALVE AS SHOWN

WASHER

SEAL BASE WITH

SILICONE CAULK

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

PAGE

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

STH

10/96

0002080063.D

7611

1:1

05/30/19

5 of 5

INSTALLATION

5400

2019

Tabla de contenidos

Manuales populares de Fuente al aire libre de otras marcas

Sunnydaze Decor

Sunnydaze Decor XSS-578 Manual de usuario

Campania International

Campania International Bibendum FT-400 Manual de usuario

Elkay

Elkay FLEXI-GUARD EFHA8 1M Series Manual de instalación

S.R.Smith

S.R.Smith Color Light Stream 2CLSLBK Manual de usuario

Hozelock Cyprio

Hozelock Cyprio Cascade 1500 Manual de usuario

Campania International

Campania International Juliet Fountain Manual de usuario

YARDART

YARDART FT-155 Manual de usuario

Alpine

Alpine WIN732 Manual de usuario

Campania

Campania Valencia Manual de usuario

Campania International

Campania International FT-320 Manual de usuario

GardenWize

GardenWize SWGSL230 Manual de usuario

Kelkay

Kelkay Easy Fountain Rustic Windmill Manual de usuario

Alpine

Alpine WIN258 Manual de usuario

Bond

Bond Signature Series Manual de usuario

Kenroy Home

Kenroy Home 51112COPBL Guía de instalación

EasyPro

EasyPro Tranquil Décor HBB39 Manual de usuario

Angelo Decor

Angelo Decor Castillo Manual de usuario

Campania International

Campania International Girona FT-102A Manual de usuario