Hawk 308N Guía del usuario
HAWK
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 308N010630, 312N004207 HANDBOOK: 308055 (REV.4.)
Issue 23.03.01
CODE
308N . 312N
(Push) (Auto Drive)
308055LC071195B
CERTIFICATE OF CONFORMITY
I, the undersigned M.A. Wright, of:
HAYTER LIMITED, Spellbrook, Bishop’s Stortford
Herts CM23 4BU
ENGLAND
certify that the lawnmowers:
1. Machine Type No. 308N 312N
2. Category. Combustion Engine Combustion Engine
3. Make. Hayter Hayter
4. Type. Rotary Rotary
5. Engine - Manufacturer. Briggs & Stratton Briggs & Stratton
- Type. 098902-2093-E1 098982-2194-E1
- Speed of rotation during test. 3000 rpm 3000 rpm
Conforms to the specifications of Directive 84/538/EEC as adapted to technical
progress by Directive 87/252/EEC and amended by Directive 88/180/EEC.
Guaranteed maximum sound power level. 96 dB(A) 96 dB(A)
- Type of cutting device Cutterbar Cutterbar
- Width of cutting device 41cm 41cm
- Speed of rotation of the cutting device 3000 rpm 3000 rpm
TESTED AT SUDBURY, SUFFOLK, ENGLAND
09.03.95 09.03.95
M.A. Wright
(Technical Director)
Signed
EC DECLARATION OF CONFORMITY
Company Name HAYTER LIMITED
Company Address Spellbrook
Bishop’s Stortford
Herts. CM23 4BU
ENGLAND
Machine Type No.. CODE 308N CODE 312N
Models Hawk Push Hawk Auto Drive
Directives complied with: 89/392/EEC amended by 91/368/EEC, 93/44/EEC and 93/68/EEC
Essential Health & Safety Requirements Relating to the Design & Construction of Machinery
and Safety Components.
84/538/EEC amended by 87/252/EEC and 88/180EEC Permissible Sound Power Levels of Lawn Mowers
89/336/EEC amended by 92/31/EEC Electromagnetic Compatibility
Standards Used: EN292, EN836, EN ISO 14982
I declare on behalf of Hayter Limited that these machines conform to the EC Essential Health & Safety
Requirements.
Date: 23.03.01 23.03.01
M.A. Wright
(Technical Director)
Signed
VIBRATION INFORMATION
Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the
handlebars. CODE 308N = 7.8ms-2. CODE 312N = 7.8ms-2.
1.31.3
308055LC071195B
CONTENTS
Page No.
CONTENTS
INTRODUCTION.
WARRANTY.
SAFETY PRECAUTIONS.
Decals
SPECIFICATIONS.
ASSEMBLY INSTRUCTIONS.
General assembly.
Assembling the mower for the first time.
STARTING THE ENGINE.
Before starting the engine.
To start the engine.
STOPPING THE ENGINE.
OPERATING THE MOWER.
Safety Notice
Height of Cut.
Travel.
Turning the mower.
Mowing with grass collection.
Mowing without grass collection.
Heavy growth.
Transporting the mower.
Cutterbar operation.
Mowing and grass care tips.
MAINTENANCE.
Engine.
Grassbag.
Deck housing.
Securing nuts and bolts.
Lubrication.
Clutch cable adjustment.
Cutterbar.
PREPARING THE MOWER FOR STORAGE.
FAULT FINDING.
308N & 312N PARTS LIST.
308N & 312N MAINFRAME DIAGRAM.
308N & 312N UPPER MAINFRAME DIAGRAM.
NOTES.
CUSTOMER INFORMATION.
1.4
1.5
1.6 - 1.9
1.9
1.10
1.11
1.11
1.12 - 1.13
1.14
1.14
1.15
1.16
1.16 - 1.22
1.16 - 1.17
1.17
1.18
1.18
1.19
1.20
1.20
1.20
1.21
1.21 - 1.22
1.23
1.23
1.23
1.23
1.24
1.24
1.24
1.25 - 1.26
1.27
1.28 - 1.29
2.1 - 2.3
2.4
2.5
2.6
2.7
1.41.4
308055LC071195B
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you
gain safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the machine as it
gives essential information regarding machine safety, operation, maintenance and
specifications. Read and understand this handbook prior to operating your machine for the
first time. Make sure you are familiar with all the controls and points of regular maintenance.
If you have any doubts, consult your Hayter authorised dealer who will be pleased to give
you assistance.
IMPORTANT: This machine is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This machine should be operated, serviced and repaired only be persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed here in and all other generally recognised regulations on safety
must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of
liability for any resulting damage or injury.
All Hayter mowers are robustly constructed and designed for efficient economical perform-
ance under normal mowing conditions. Correct operation and maintenance will ensure a long
and satisfactory service life. Prior to despatch from our factory every effort is made to ensure
your machine arrives in perfect condition.
Throughout this handbook all references to left hand and right hand are as viewed from
behind
the handlebar, facing in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to make changes at any time without notice.
INTRODUCTION
1.51.5
308055LC071195B
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturers of the engine and battery pack system (where applicable)
furnish their own warranty and services are provided through their authorised network (Refer to
"Engine/Battery Pack Warranty Statement"). To qualify for the full benefit of the warranty, the
warranty registration card must be returned within 60 days of purchase. Subject to the conditions
and exclusions noted in this limited warranty, we shall at our option, repair or replace any
warranted part during the applicable period. If you are in doubt or experience any difficulty,
please consult a Hayter Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty
the machine must have annual services carried out by an Authorised Hayter Service Dealer.
These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterbars, cables, batteries and other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original
equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake units and other such devices are not applicable.
Only machines fitted with a genuine Hayter friction disc, which are used in accordance with the
recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner's Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase stating the machine serial number and date of purchase. The service receipt(s) or this
Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted
part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop's Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages or
contact:- Freephone 0800 616298.
Date.................................................................... Date.............................................................
Signed................................................................ Signed..........................................................
DEALER STAMP
DEALER STAMP
1st Year
Service
Record
2nd Year
Service
Record
1.61.6
308055LC071195B
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
The Hawk is perfectly safe if used correctly. Failure to observe the
following simple precautions may result in serious injury.
THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED.
WHEN YOU SEE THIS SYMBOL BE ALERT TO THE POSSIBILITY OF
INJURY. CAREFULLY READ THE MESSAGE THAT FOLLOWS AND
INFORM OTHERS.EXERCISE GREAT CARE AND FOLLOW THE
ADVICE GIVEN TOAVOID POTENTIALLY HAZARDOUS SITUATIONS.
Training:
Read the instructions carefully. Ensure that you are familiar with the controls and the proper
use of the equipment. Learn how to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to use the mower.
Never mow while people , especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards occurring to other people
or their property.
Preparation:
While mowing, always wear substantial footwear and long trousers. Do not operate the equip-
ment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove all objects which may
be thrown by the machine.
WARNING: Petrol is highly flammable.
-Store fuel in containers specifically designed for this purpose.
-Refuel outdoors only and do not smoke while refuelling.
-Add fuel before starting the engine. Never remove the cap from the fuel tank or add petrol
while the engine is running or when the engine is hot.
-If petrol is spilled, do not attempt to start the engine but move the mower away from the area
of spillage. Avoid creating any source of ignition until petrol vapours have dissipated.
-Replace all fuel tank caps and fuel container caps securely.
Replace faulty silencers.
1.71.7
308055LC071195B
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS Continued.
Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts
and screws for tightness. Use only genuine Hayter replacement parts.
A damaged cutterbar and loose fixing bolt are a major hazard. Before use, visually inspect the
cutting mechanism to ensure that it is in good condition.A damaged cutterbar must be replaced
immediately with a genuine Hayter replacement part. A cutterbar which is slightly worn can
be resharpened. Ensure that both cutting edges are resharpened equally to maintain balance.
An unbalanced cutterbar may cause serious damage to your machine.
Refer to "Maintenance."
Operation:
Do not operate the engine in a confined space where dangerous carbon monoxide fumes can
collect.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine if the mower has to be tilted for transportation when crossing surfaces other
than grass and when transporting the mower to and from the area to be mowed.
Never operate the mower unless the guards are securely in position and in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the rear roller drive clutch before starting the engine. (Auto-Drive model only).
1.81.8
308055LC071195B
SAFETY PRECAUTIONS
Operation continued:
Start the engine carefully, with feet well away from the cutterbar.
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry a mower while the engine is running.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
- After striking a foreign object. Inspect the mower for damage and make repairs
before restarting and operating the mower.
- If the mower starts to vibrate abnormally ( check immediately ).
Stop the engine:
When using the machine without the grassbag, do not lift the rear deflector guard whilst the
mower is in operation.
WARNING: THE CUTTERBAR CAN CONTINUE TO ROTATE
AFTER THE ENGINE IS SWITCHED OFF.
SAFETY PRECAUTIONS Continued.
- Whenever you leave the mower.
- Before refuelling.
DECAL - ENGINE STOP
Part No. 331046
DECAL - HEIGHT OF CUT INDICA-
TOR: Part No. 305113
1.91.9
308055LC071195B
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS Continued.
Maintenance and storage:
Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.
Never store the mower with petrol in the tank within an enclosed area where fumes may reach
an open flame or spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine, silencer and petrol storage area free of grass, leaves,
or excessive grease.
Check the grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, it is essential that this be done outdoors.
DECALS
WARNING DECAL: Part No. 219189
DANGER OF BEING HIT BY THROWN OBJECTS.
KEEP BYSTANDERS AT A SAFE DISTANCE
FROM THE MACHINE.
WARNING - CAUTION RISK OF DANGER - SAFETYALERT.
DANGER OF SEVERING TOES OR FINGERS
IN CUTTING MECHANISM.
STOP ENGINE AND REMOVE SPARK PLUG LEAD BEFORE
PERFORMING MAINTENANCE OR REPAIR WORK.
CAREFULLY READ THE OPERATORS MANUAL BEFORE
USING THE MACHINE.
DECAL - CUT HEIGHT ADJUSTMENT:
2
4
6
STOP
1.101.10
308055LC071195B
SPECIFICATIONS
SPECIFICATIONS
Engine
Engine type
Engine / cutterbar
speed
Fuel type
Fuel capacity
Oil type
Oil sump capacity
Cutting width
Cutting height
Overall dimensions
Dry Weight
CODE 312N
Auto Drive
CODE 308N
Push
MODELS
Briggs & Stratton Sprint 375
098902 - 2093 - E1 098982 - 2194 - E1
3000 rpm
Unleaded petrol
1.0 litres ( 1.8 UK pints )
SAE 30 engine oil
0.6 litres ( 1.1 UK pints )
410mm ( 16 inch )
12 - 65mm ( 0.5 - 2.6 inch )
1,340 x 451 x 1,041mm ( 52.75 x 17.75 x 41 inch )
24.5 Kg ( 53.9 lbs ) 28.3 Kg ( 62.3 lbs)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Cortacésped de otras marcas
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manual de usuario
DEWEZE
DEWEZE ATM-725 Manual de operación
Weed Eater
Weed Eater 180083 Manual de usuario
Husqvarna
Husqvarna Poulan Pro PP185A42 Manual de usuario
Better Outdoor Products
Better Outdoor Products Quick Series Manual de usuario
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manual de funcionamiento
