Table of Contents
10 3
Specications
Parts Included
Port Replication Capability
Set-Up Instructions
Operating Basics
3
4
6
7
10
• Do not place metal objects or containers of liquid on top of the Touch Screen Display.
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop.
• Use only the supplied Power Supply with this Docking Station.
• Do not store the Touch Screen Display where water, moisture, steam, dust, etc. are present.
• Do not connect cables into ports other than what they are specied for.
• Do not leave the Touch Screen Display in a high temperature environment
(greater than 85°C, 185°F) for an extended period of time.
Precautions
Operating Basics
EC DECLARATION OF CONFORMITY in accordance with EN 50498
Manufacturer’s Name: Havis, Inc.
Manufacturer’s Address: 47099 File Mile Road, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Touch Screen Display
Model: TSD-10X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) -
2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
Supplementary Information:
The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8,
and 6.9. This product requires the use of a recommended e-Marked automotive power supply when used within vehicles.
Plymouth Twp, MI, USA January 29, 2016 Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model TSD-10X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
Specications
Power Supply Input 12V DC-In
Dimensions 8.5” ( 21.6 cm) H x 11.7” ( 29.7 cm ) W x 1.4” ( 3.5 cm ) D
Weight 2.2 lbs ( 1.0 kg )
Operating Environment -21° C to 60° C ( -6° F to 140°F )
Storage Environment -40° C to 85° C ( -40° F to 185° F )
Turning On/O
Using the Touch Screen
1) With the Touch Screen Display connected to the Lind Power Supply and the
vehicle docking station, press the Power Button.
2) The Power Indicator will illuminate to a green light (Powered ON Mode).
The Touch Screen Display receives data from the system and displays the output
on the screen. If Power Indicator illuminates amber, Touch Screen Display has
power (Standby Mode), but is not receiving signal from source device. Verify
Settings on source device (duplicate or extend monitor) or check connections
and retry.
3) Press the Power Button to turn off the Touch Screen Display. Power Indicator
is not illuminated.
1) Tap the screen with your nger or ngers to communicate with the system.
