Havis TC-105 Manual de usuario
Owner’s Manual
Havis Tablet Docking Stations
and Tablet Cases
DS-TAB-100 Series
DS-TAB-101
DS-TAB-102
DS-TAB-104
DS-TAB-100^TC-100-SERIES_OMN_05-22
Havis, Inc.
75 Jacksonville Road
Warminster, PA 18974
TC-100 Series
TC-101
TC-102
TC-104
TC-105
TC-107
TC-108
TC-109
TC-110
TC-111
Before Beginning
Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the
DS-TAB-100 Series Docking Stations and TC-100 Series Tablet Cases.
For questions regarding the set-up of your DS-TAB-100 Series Docking Station or TC-100 Series Tablet Case,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
•NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
•DO NOT USE TABLET WHILE DRIVING.
•READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
•DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.
ARE PRESENT
•LITHIUM-ION BATTERIES TYPICALLY CHARGE BEST BETWEEN 5°C to 45°C (41°F to 113°F ). PLEASE REFER TO YOUR
TABLET MANUFACTURER OWNER’S MANUAL FOR DETAILS.
Tablet
TC-100
Tablet
Case
DS-TAB-101 Docking Station
(Charge Only)
DS-TAB-102 Docking Station
(USB-C Charge & Data)
Apple iPad Pro 10.5-inch (1st Gen)
Apple iPad Air (3rd Gen) TC-101* PKG-TAB-APP1 N/A
Samsung Galaxy Tab S3 TC-102 PKG-TAB-SAM6 PKG-TAB-SAM1
Samsung Galaxy Tab Active 2 TC-104 PKG-TAB-SAM4 PKG-TAB-SAM3
Samsung Galaxy Tab S4 TC-105 PKG-TAB-SAM7 PKG-TAB-SAM8
Apple iPad (7th Gen) TC-107* PKG-TAB-APP6 N/A
Samsung Galaxy Tab Active Pro TC-108 PKG-TAB-SAM9 PKG-TAB-SAM10
Apple iPad Pro 12.9-inch
(3rd and 4TH Gen)TC-109 N/A PKG-TAB-APP9
Apple iPad Pro 11-inch
(1st & 2nd Gen) TC-110 N/A PKG-TAB-APP12
Apple iPad Air(4th and 5th Gen) TC-111 N/A PKG-TAB-APP15
Product Compatibility
* Apple Pencil is not compatible due to pairing requirements. The Apple Pencil 1st Generation requires direct access to the Lighting Connector on the iPad and will
not pair via Bluetooth Connection.
DS-TAB-100 Series
(TC-100 Series Specifications vary by model and are supplied with Tablet Case)
Specifications
Power Supply Input 12V Nominal (10-17 VDC Input)
Dimensions 9.01” (22.89 cm) H x 6.00” (15.24 cm) W x 1.40” (3.56 cm) D
Weight 0.77 lbs. (0.35 kg)
Operating Environment Please refer to your Tablet Manufacturer Owner’s Manual for operating range.
Storage Environment -20°C to 85°C (-4° F to 185°F)
Havis Product Only, please refer to your Tablet Manufacturer Owner’s Manual for
storage range.
Precautions
•If a malfunction occurs, immediately unplug the Power Supply and remove the tablet
•Use only the specified Power Cable with this Docking Station
•Do not connect cables into ports other than what they are specified for
•Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for
a long period of time
•Do not dock Tablet Case if Docking Connector Pins are bent or damaged
EC DECLARATION OF CONFORMITY in accordance with EN 50498
Manufacturers Name: Havis, Inc.
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For X Tablets, where ‘X’ denotes tablets listed in product compatibility matrix.
Model: DS-TAB-10X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) -
2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
Supplementary Information:
The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8, and 6.9. This product requires the
use of a recommended e-Marked automotive power supply when used within vehicles.
Warminster, PA, USA September 20, 2018 Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-TAB-10X not expressly
approved by Havis, Inc. could void the user's authority to operate this equipment.
Parts Included (DS-TAB-100 Series)
Front Hooks
Mounting Holes (x4)
(VESA 75mm Hole Pattern)
Strain Relief and
Cable Routing Channels
Docking Station
Release Handle
Barrel Lock
Alignment Posts
Docking Connector
LED Power Indicator
Ports
Latch Hook
Power Cable
(DS-DA-325)
Parts Included
(DS-TAB-100 Series)
(continued)
Hardware Kit (HWK-0042)
This Hardware Kit includes:
1. Zip Ties (5)
2. Keys (2)
3. M4 x 0.7 x 12mm Long Screws (5)
4. Flat Washers, M4 (5)
5. Lock Washers, M4 (5)
Tools required for installation:
• #2 Phillips
(For attaching Docking Station to VESA 75mm
hole pattern equipment with M4 x 0.7 x 12mm Screws)
Port Replication Capability
(DS-TAB-100 Series)
Downward Facing Ports
USB 2.0 (x2)Power Input
DS-TAB-101: Charge Only
DS-TAB-102: Charge & Data
1) Align Docking Station mounting holes with the hole pattern on mounting device. Using the
four (4) M4 0.7 x 12mm Pan Head Screws (Hardware Kit Item 3), four (4) Washers, M4
(Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5), secure the
Docking Station to device. Torque screws to 15 in-lbs (1.7Nm) ±10%
A) Havis Desktop Stand installation (sold separately, Part # DS-DA-218).
B) In-Vehicle mounting system installation (not included).
Installation
(DS-TAB-100 Series)
Washer, M4
M4 x 0.7 x 12mm
Pan Head Screws
Lock Washer, M4
Desktop Stand
(not included)
Washer, M4
M4 x 0.7 x 12mm
Pan Head Screws
Lock Washer, M4
Mounting Device
(Part ID: C-MD-402 shown, not included)
1) Tip the Docking Station to a position that is comfortable to work with.
2) Install all cables that are necessary for computing needs.
3) Use Zip Ties (Hardware Kit Item 1) and the Strain Relief Points to secure cables and reduce risk of
accidental disconnects.
4) Create a service loop with cables to ensure that no tension is on the connectors and to enable
intended motion.
5) Tie off cables onto a stationary part of the mounting system.
Cable Management
(DS-TAB-100 Series)
4
5
This loop must be large enough to allow
full range of expected rotation and
extension without stressing connections.
Collect cables to secure to the
mounting system or vehicle.
(Note: mounting system not included)
After connecting
To vehicle power,
Green LED
will illuminate
shown in extended position
Parts Included (TC-100 Series)
Tablet Case (Part ID TC-101 shown assembled with iPad 10.5”)
Hand Strap*
(shown assembled)
Audio Port
Stylus Holder*
Charge Port
Docking Connector
Kick Stand*
Docking Alignment Pockets
Docking Latch Hook Pocket
Shoulder Strap Clip
Mounting Points
* Not included with all Tablet Case models
Parts Included
(TC-100 Series)
(continued)
Hardware Kit (HWK-0055)
This Hardware Kit includes:
1. M2.5 , 6mm long Washer Head Screws (12)
2. T8 Torx Bit, ¼” Hex Shank (1)
Tools required for installation:
• ¼” Driver for T8 Torx Bit
(For attaching Back Piece to Front Piece
with M2.5 Washer Head Screws)
Tablet Case
Front Tablet Case Assembly Back Tablet Case Assembly
Additional Items:
Depending on Tablet Case Model, Tablet Case may include:
1. Power Cable (1)
2. Hand Strap (1)
1) Assemble hand strap by guiding each end through the slots on the Back Assembly of Tablet
Case. Adjust loop size as desired and secure Velcro closures.
2) Insert the connector from the Back Assembly of the Tablet Case into your tablet (Apple iPad
Pro 10.5” shown here).
Installation
(TC-100 Series)
IF A SCREEN PROTECTOR IS BEING USED ON TABLET (NOT INCLUDED),
ASSEMBLE BEFORE BEGINNING TABLET CASE INSTALLATION.
Este manual sirve para los siguientes modelos
25
Tabla de contenidos
Otros manuales de Accesorios para tabletas de Havis
Manuales populares de Accesorios para tabletas de otras marcas
Bretford
Bretford PowerRack 10 Manual de usuario
Brenthaven
Brenthaven EDGE 360 Manual de usuario
Fujitsu
Fujitsu Stylistic 3400 Manual de usuario
Heckler Design
Heckler Design WindFall STAND Manual de usuario
Kensington
Kensington KeyFolio SecureBack Manual de usuario
Xplore
Xplore Companion Keyboard Manual de usuario
Logitech
Logitech Ultrathin Manual de usuario
Infinite Peripherals
Infinite Peripherals INFINEA X MINI Manual de usuario
Trust
Trust Executive Folio Stand Manual de usuario
Manhattan
Manhattan 406017 Manual de usuario
Logitech
Logitech SLIM COMBO Manual de usuario
Logitech
Logitech AnyAngle iC1051 Manual de usuario