Page | 2
BMW E46 M3 FRONT BRAKE UPGRADE
Installing this product indicates your acceptance of the responsibility and liability associated with the fitment
and use of this product. Please ensure the owner and all drivers of the vehicle are aware of their
responsibilities and liabilities as indicated below.
Thank you for purchasing this Harrop brake hardware upgrade kit which has been designed and made with pride in Australia.
It is the owner’s/driver’s responsibility to accept any consequences and liabilities of using the enhanced vehicle and any
subsequent effect it may have. Harrop Engineering is to be held harmless and shall not be liable for any direct and/or
indirect/consequential losses, costs, damages, expenses, injuries or liabilities whatsoever incurred by the owner/driver of the
vehicle or other parties arising from this product, its installation and/or its operation.
Warranty
This Harrop brake hardware upgrade kit is covered by a limited warranty on components and workmanship for a period of 12
months from the date of purchase, subject to the following:
•Installation must be completed by a technician who has undertaken appropriate training.
•The enhanced vehicle has been driven in accordance with the conditions specified by the vehicle manufacturer’s
normal use of operation, driving care and vehicle service program.
•The enhanced vehicle has not been used for competitive racing.
No warranty shall apply where Harrop have determined improper fitment or handling, misuse in operation, neglect, or
accident damage. Modifications made prior to or in conjunction with the Harrop brake hardware upgrade kit fitment may
invalidate the Harrop limited warranty. Any warranty claims must be made immediately & directly to Harrop Engineering so
that a determination can be made promptly. Involvement of a third party or an attempt to repair a perceived/actual fault
may invalidate the warranty. To the extent of the law, the determination on any warranty claim & associated costs will be at
the sole discretion of Harrop Engineering.
By installing the Harrop brake hardware upgrade kit you acknowledge that all conditions pertaining to
this product and its operation have been read, understood and accepted.
Brake hardware upgrade installation guide.
•Park the vehicle on level ground and place the transmission in neutral with the hand brake
off.
•Ensure that the brake fluid reservoir is full and free from dirt etc.
•Raise the vehicle off the ground using appropriate equipment and remove the wheels.
Brake disassembly and Assembly.
•It is recommended to work on one wheel at a time.
