Harris PRE99-1500-08 Manual de operación

PRE99-1500-08 (Oasis-08)

PRE99-1500-08A (Oasis-08, Analog-only)

PRE99-1500-12 (Oasis-12)

PRE99-1500-12A (Oasis-12, Analog-only)

Installation

User Guide

Designs by Pacific Research & Engineering –PR&E®

TABLE OF CONTENTS

Safety & Hazard/Warning Labels .......................................................... 3

1 - Introducing Oasis ............................................................................... 4

Oasis Specifications .......................................................................... 6

Harris Warranty Statement ............................................................. 7

2 –Installation ......................................................................................... 10

Preparing the Countertop ................................................................ 10

Connecting the Wiring ...................................................................... 11

Console Power ................................................................................... 13

Configuration Switches .................................................................... 13

3 –Console Setup .................................................................................... 14

Default Configuration ...................................................................... 14

Oasis Control Center Application ................................................... 14

Installing the OCC App ..................................................................... 15

Using Oasis Control Center .............................................................. 15

4 - Use, Applications, and Options ........................................................ 20

5 - Service Information .......................................................................... 25

Safety Instructions Hazard and Warning

Label Identification

RISKOFELECTRICSHOCK

DONOT OPEN

C A UTION

WARNING: SHOCKHAZARD- DONOT OPEN

AVIS: RISQUEDECHOCELECTRIQUE- NEPASOUVRIR

CAUTION: TO REDUCE THERISKOFELECTRIC SHOCKDONOT

REMOVE ANYCOVER ORPANEL. NOUSER SERVICEABLE PARTS

INSIDE. REFER SERVICINGTO QUALIFIEDSERVICEPERSONNEL.

WARNING: TO REDUCE THERISKOFFIREORELECTRICSHOCK,

DONOT EXPOSE THEPRODUCTTO RAINORMOISTURE.

1. ReadAllInstructions.Readallsafetyandoperating

instructionsbeforeoperatingtheproduct.

2. RetainAllInstructions.Retainallsafetyandoperating

instructionsforfuturereference.

3. HeedAllWarnings.Youmustadheretoallwarningson

theproductandthoselistedintheoperatinginstructions.

4. FollowAllInstructions.Followalloperatingandproduct

usageinstructions.

5. Heat.Thisproductmustbesituatedawayfromanyheat

sourcessuchasradiators,heatregisters,stoves,orother

products(includingpoweramplifiers)thatproduceheat.

6. Ventilation.Slotsandopeningsintheproductareprovided

forventilation.Theyensurereliableoperationoftheproduct

andkeepitfromoverheating.Donotblockorcoverthese

openingsduringoperation.Donotplacethisproductintoa

rackunlessproperventilationisprovidedandthemanufac-

turer’srecommendedinstallationproceduresarefollowed.

7. WaterandMoisture.Donotusethisproductnearwater

suchasabathtub,washbowl,kitchensink,orlaundrytub,

inawetbasement,ornearaswimmingpoolorthelike.

8. Attachments. Donotuseanyattachmentsnot

recommendedbytheproductmanufacturerastheymay

causehazards.

9. PowerSources.Youmustoperatethisproductusingthe

typeofpowersourceindicatedonthemarkinglabeland

intheinstallationinstructions.Ifyouarenotsureofthe

typeofpowersuppliedtoyourfacility,consultyourlocal

powercompany.

10.GroundingandPolarization.Thisproductisequipped

withapolarizedACplugwithintegralsafetygroundpin.

Donotdefeatthesafetygroundinanymanner.

11.PowerCordProtection.Powersupplycordsmustbe

routedsothattheyarenotlikelytobewalkedonnor

pinchedbyitemsplaceduponoragainstthem.Pay

particularattentiontothecordsatACwallplugsand

conveniencereceptacles,andatthepointwherethe

cordplugsintotheproduct.

12.Lightning.Foraddedprotectionforthisproduct,unplugit

fromtheACwalloutletduringalightningstormorwhenit

isleftunattendedandunusedforlongperiodsoftime.This

willpreventdamagetotheproductduetolightningand

powerlinesurges.

13.Overloading.DonotoverloadACwalloutlets,extension

cords,orintegralconvenienceoutletsasthiscanresultin

afireorelectricshockhazard.

14.ObjectandLiquidEntry.Neverpushobjectsofanykind

intothisproductthroughopeningsastheymaytouch

dangerousvoltagepointsorshortoutparts,whichcould

resultinafireorelectricshock.Neverspillliquidofany

kindontheproduct.

15.Accessories.Donotplacethisproductonanunstable

cart,stand,tripod,bracket,ortable.Theproductmayfall,

causingseriousinjurytoachildoradultandserious

damagetotheproduct.Anymountingoftheproduct

mustfollowmanufacturer’sinstallationinstructions.

16.ProductandCartCombination.Movethisproductwith

care.Quickstops,excessiveforce,andunevensurfaces

maycausetheproductandthecartcombinationto

overturn.

17.Servicing.Referallservicingtoqualifiedservicing

personnel.

18.DamageRequiringService.Unplugthisproductfrom

thewallACoutletandreferservicingtoqualifiedservice

personnelunderthefollowingconditions:

a. WhentheACcordorplugisdamaged.

b. Ifliquidhasbeenspilledorobjectshavefalleninto

theproduct.

c. Iftheproducthasbeenexposedtorainorwater.

d. Iftheproductdoesnotoperatenormally(following

operatinginstructions).

e. Iftheproducthasbeendroppedordamagedinany

way.

f. Whentheproductexhibitsadistinctchangein

performance.Thisindicatesaneedforservice.

19.ReplacementParts.Whenreplacementpartsare

required,besuretheservicetechnicianhasused

replacementpartsspecifiedbythemanufacturerorthat

havethesamecharacteristicsastheoriginalparts.

Unauthorizedsubstitutionsmayresultinfire,electric

shock,orotherhazards.

20.SafetyCheck.Uponcompletionofanyrepairstothis

product,asktheservicetechniciantoperformsafety

checkstodeterminethattheproductisinproper

operatingcondition.

21.Cleaning.Donotuseliquidoraerosolcleaners.Useonly

adampclothforcleaning.

NOTE:TheVMFamilyofequipmenthasbeentestedandfoundtocomply

withthelimitsforaClassAdigitaldevice,pursuanttopart15oftheFCC

Rules.Theselimitsaredesignedtoprovidereasonableprotectionagainst

harmfulinterferencewhentheequipmentisoperatedinacommercial

environment.Thisequipmentgenerates,uses,andcanradiateradio

frequencyenergyand,ifnotinstalledandusedinaccordancewiththe

instructionmanual,maycauseharmfulinterferencetoradio

communications.Operationofthisequipmentinaresidentialareaislikely

tocauseharmfulinterferenceinwhichcasetheuserwillberequiredto

correcttheinterferenceathisownexpense.

TheExclamation Point symbol,withinanequilateral

triangle,alertstheusertothepresenceofimportant

operatingandmaintenance(servicing)instructionsin

productliteratureandinstructionmanuals.

TheLightningFlashWithArrowheadsymbol,within

anequilateraltriangle,alertstheusertothepresenceof

uninsulateddangerousvoltagewithintheproduct’s

enclosurethatmaybeofsufficientmagnitudeto

constituteariskofelectricshock.

1 –INTRODUCING OASIS

Oasis-08 Control Surface

Rear Cover Dual Meter Display Side Cover

Control Surface Palm Rest Option Panel

Oasis-08 Main Parts

Oasis Dual Display

Harris Corporation reserves the right to change specifications without notice

or obligation.



1. The Standard Equipment Warranty Period is 15 months from date of equipment shipment from

a Harris facility. The Customer’s sole and exclusive remedy for any breach of the Standard

Equipment Warranty will be, at Harris’ sole discretion and option, repair or replacement of the

defective Product. Components that Customer claims to be defective must be made available to

Harris for inspection and evaluation. Unless otherwise agreed in writing by Harris, Customs

clearance for all replacement parts under the warranty or otherwise will be Customer’s sole

responsibility. To be entitled to rights under the Standard Equipment Warranty, the Customer

must notify Harris in writing within thirty (30) days after discovering a suspected defect in any

Product or Services, but in any event prior to the expiration of the applicable Standard Warranty

Period. Notice to a Harris dealer, system integrator, sales representative or other third party is not

notice to Harris. Following its receipt of any such Customer notice, Harris will determine whether

the reported problem is covered by this Standard Equipment Warranty. If Harris determines that

the problem is covered, Harris will authorize repair or replacement of the defective Product, as

deemed appropriate by Harris in its sole discretion. For clarification purposes, any technical

support provided by Harris will be for the sole purpose of fulfilling Harris’ warranty obligations. If

Harris determines that Customer is using technical support as a substitute for training of

Customer’s personnel, then such technical support will be subject to additional charges at Harris’

prevailing unit rate for such services.

2. Before shipping any Product to Harris, the Customer must obtain a written Return

Authorization from Harris, and provide any proof of warranty eligibility requested by Harris. Any

Product received by Harris without a Return Authorization may, at Harris’ option, be returned to

the Customer collect. Once a Return Authorization is obtained, the Customer is responsible for

packing and shipping the Product, to which its warranty claim relates, to a service facility

designated by Harris, with all shipping charges prepaid by the Customer, within thirty (30) days

after receipt of the Return Authorization. Harris will pay for return of the repaired or replacement

Product to the Customer if the repaired or replacement Product is shipped to a designated Harris

service facility. Harris will use commercially reasonable efforts to supply Equipment (or part

thereof) from the geographical region of Customer’s site, so as to minimize freight and duty.

Harris bears the risk of loss or damage while the Equipment (or part thereof) is in transit to

Customer from the Harris Service Center, and Customer bears the risk of loss or damage while the

Equipment (or part thereof) is in transit back to the Harris Service Center.

3. Upon receipt of replacement Equipment (or a part thereof), Customer has thirty (30) days to

tender the defective Equipment (or part thereof) to the return carrier for shipment to the service

center designated by Harris. If Customer does not timely return the defective Equipment (or a

part thereof), Harris shall invoice Customer for the list price of such Equipment (or part thereof),

plus applicable shipping. Such failure to return the Equipment (or part thereof) may, in Harris’

discretion, be grounds for termination of the Warranty and/or suspension of any future advance

exchange privileges until such outstanding defective Equipment has been returned. Under the

Standard Equipment Warranty Harris will provide Customer with new, rebuilt, refurbished or

alternate Equipment (or a part thereof) of equal or improved quality, as the exchange Equipment

(or part thereof) to replace eligible defective Equipment (or part thereof). Any alternate

Equipment (or part thereof) will meet or exceed the specifications of the replaced Equipment (or

part thereof). Rebuilt or refurbished Equipment may bear cosmetic blemishes that do not affect

performance. Unless otherwise specified by Harris in writing, repaired or replaced Equipment (or

parts thereof) are covered only for the remainder of the term of the applicable Standard

Equipment Warranty. All defective Equipment (or parts thereof) replaced by Harris become the

property of Harris. Harris has no obligation to (i) service, exchange or otherwise replace any

Equipment (or part thereof) that has been damaged, modified, abused, misused or overused as

determined by Harris or has been used with non-Harris supplies or products that have caused

damage or malfunction; (ii) paint, refinish, refurbish, restore or exchange any Equipment (or part

thereof) with cosmetic blemishes; (iii) service, exchange or otherwise replace any Equipment (or

part thereof) if the same would interfere with, impede or be redundant with normal or scheduled

maintenance of such Equipment (or part thereof); (iv) service, exchange or otherwise replace any

Equipment (or part thereof) that is within sixty (60) days of the end of its production life; or (v)

provide any application software support or service involving application hardware or replace any

accessories. If Harris elects to perform any such services at Customer’s request, then such services

will be deemed a service call and all labor, parts and materials used for the service call will be

charged at Harris’ then-prevailing rates.

Harris does not warrant nor guarantee, and is not responsible for:

1. Defects, failures, damages or performance limitations caused in whole or in part by (A) power

failures, surges, fires, floods, snow, ice, lightning, excessive heat or cold, highly corrosive

environments, accidents, actions of third parties, or other events outside of Harris’ control, or (B)

Customer’s abuse, mishandling, misuse, negligence, improper storage, servicing or operation, or

unauthorized attempts to repair or alter the Equipment in any way. Customer must provide

qualified technical personnel to maintain and repair the Equipment.

2. Equipment built to Customer’s specifications that are later found not to meet Customer’s needs

or expectations.

3. The performance of the Equipment when used in combination with equipment not purchased,

specified, or approved by Harris.

4. Signal coverage delivered by antenna equipment whether or not supplied by Harris.

5. Batteries and other consumable goods.

1. OEM or Third Party equipment that is incorporated into Harris Equipment is covered under the

applicable Harris Standard Equipment Warranty unless the OEM or Third Party equipment carries

its own limited warranty, in which event the OEM or Third Party warranty will apply to such

equipment incorporated into Harris Equipment. For example and not limitation, CRTs, LCDs,

FSMs and Optical Test products are OEM products that have a limited 1 year manufacturer’s

warranty.

2. Items Sold As Resale. Items sold as resale are such items that are not manufactured by Harris

but may be utilized in conjunction with or independently of Harris manufactured Equipment

(such as tubes, printers and antenna transmission lines) and shall be covered only by the specific

warranty terms of the supplier or original equipment manufacturer of those items. IF AN ORDER

COVERS EQUIPMENT NOT OWNED BY HARRIS, IT IS SOLD SUBJECT TO HARRIS’

ACQUISITION OF POSSESSION.

3. B-Stock Equipment. B-Stock Equipment for non-transmitter related Equipment is defined as

any non-out-of-production product that is less than three (3) years old. B-Stock Equipment related

to transmitters is defined as equipment repurchased by Harris that is reconditioned or refurbished

for sale to a second generation owner by Harris or its reseller.

4. Used Equipment. IF THE EQUIPMENT SPECIFIED IN AN ORDER IS DESCRIBED AS USED,

UNLESS OTHERWISE AGREED IN WRITING BY THE PARTIES, IT IS SOLD “AS IS” AND WITH

NO WARRANTY.

Harris warrants that the Services will be performed in a professional manner (the “Services

Warranty”). Notice of a breach of the Services Warranty must (i) specify in reasonable detail, the

nature of the claim, and (ii) be received within ninety (90) days from the last day of performance

of the Services. Upon notice of a breach of the Services Warranty and Harris’ determination of the

validity of such breach of the Services Warranty, Harris will re-perform the applicable Services at

Harris’ expense. If after reasonable opportunity Harris is unable to re-perform such Services to the

reasonable satisfaction of Customer, Customer may, as its exclusive remedy, obtain a refund of the

fees paid to Harris under the applicable Order for such Services.

1. Physical Media. Harris warrants all physical media (“software media”) for the Licensed

Programs, including without limit custom software and traffic translators, to be free of defects in

material or workmanship for a period of ninety (90) days from the date of completed installation,

or if Customer should assume responsibility for installation of the Software, for a period of ninety

(90) days from the date of shipment of the Licensed Programs by Harris (the “Software Warranty

Period”). This limited warranty extends only to Customer as the original licensee. Customer’s sole

and exclusive remedy under this limited warranty will be, at Harris’ option, repair or replacement

of the software media.

2. Licensed Programs. Harris warrants that during the Software Warranty Period (or such other

time period as agreed in writing by the parties) the Licensed Programs shall operate substantially

in compliance with Harris’ specifications for the Licensed Programs (the “Software Warranty”).

The entire liability of Harris under this limited warranty is to provide, free of charge, a corrected

copy of any portion of the Licensed Programs which is found by Harris inspection not to be in

substantial compliance with its specifications. If Harris is unable to provide a corrected copy of the

Licensed Programs within a reasonable time, as Customer’s sole and exclusive remedy, Harris will

replace the same with a functionally similar program or refund to Customer the amounts

Customer paid Harris to purchase or license such Licensed Programs. Harris does not warrant

that such Programs are error free or that Customer will be able to operate such Programs without

problems or interruptions. Corrections to the Licensed Programs beyond the Software Warranty

Period will only be made by Harris pursuant to a separate software maintenance agreement.

3. Cost of Corrections. During the Software Warranty Period, Harris will bear the material cost

and shipment of corrected or replacement Software at no charge to Customer. Software

corrections will be sent via e-mail. In the rare event Customer requires a Harris customer support

engineer to visit the site, related reasonable pre-approved on-site time and travel expenses will be

billed at the prevailing daily rates, unless otherwise agreed to in writing prior to the visit. A ONE-

DAY MINIMUM CHARGE APPLIES TO ALL ON-SITE VISITS.

4. Software Warranty Exclusions. The Software Warranty does not apply to any software media or

Licensed Program that (A) has been altered or modified, except by Harris; (B) has not been

installed, operated, repaired, or maintained in accordance with instructions supplied by Harris;

(D) is used in ultra hazardous activities.

EXCEPT AS EXPRESSLY PROVIDED IN THIS STANDARD WARRANTY POLICY STATEMENT,

HARRIS HEREBY EXPRESSLY DISCLAIMS ALL REPRESENTATIONS, CONDITIONS AND

WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING BY WAY OF EXAMPLE AND

NOT LIMITATION, THE IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, NON-

INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.

NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, IN NO EVENT WILL HARRIS

BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES

WHATSOEVER, INCLUDING LOSS OF PROFITS, WHETHER ARISING IN CONTRACT, TORT,

WARRANTY OR OTHERWISE, EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. THE LIMITATIONS SET FORTH HERE WILL APPLY EVEN IF THE REMEDIES OF

ERROR CORRECTION, REPAIR OR REPLACEMENT, REPERFORMANCE OF SERVICES AND

REFUND OF PAYMENTS COMPLETELY FAIL OF THEIR ESSENTIAL PURPOSE.

NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, THE LIMIT OF HARRIS’

LIABILITY (WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, BY STATUTE

OR OTHERWISE) TO CUSTOMER OR TO ANY THIRD PARTY CONCERNING THE HARRIS

EQUIPMENT OR SOFTWARE LICENSES SOLD TO CUSTOMER AND WARRANTED

HEREUNDER, HARRIS’ PERFORMANCE OR NONPERFORMANCE, OR IN ANY MANNER

RELATED TO THIS STANDARD WARRANTY POLICY STATEMENT, FOR ANY AND ALL

CLAIMS WILL NOT IN THE AGGREGATE EXCEED THE ACTUAL AMOUNTS RECEIVED BY

HARRIS FOR THE SPECIFIC PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE.

Applicable Law, Venue and Jurisdiction. This Standard Warranty Policy Statement, and any

disputes related hereto, shall be governed by and interpreted in accordance with the laws of the

State of Florida, USA, regardless of any law principles requiring the application of any other law.

The parties agree that the exclusive venue for any action related to the dispute or interpretation of

this Agreement shall be in the courts with the appropriate jurisdiction located in Orlando, Florida,

and each party irrevocably submits to the jurisdiction of each such court in any such action and

waives any objection it may now or hereafter have to venue or personal jurisdiction in each such

court. The prevailing party in any action related to the dispute or interpretation of this

Agreement shall be entitled to recover its reasonable attorneys fees incurred in pursuing the

action, including those fees incurred throughout all bankruptcy and appellate proceedings.

THE PARTIES FURTHER AGREE, TO THE EXTENT PERMITTED BY LAW, TO WAIVE ALL

RIGHTS TO A TRIAL BY JURY OF ANY ACTION RELATING TO THE DISPUTE OR

INTERPRETATION OF THIS AGREEMENT, WHETHER SOUNDING IN CONTRACT, TORT, OR

OTHERWISE. THE PARTIES SPECIFICALLY ACKNOWLEDGE THAT THIS WAIVER IS MADE

KNOWINGLY AND VOLUNTARILY AFTER AN ADEQUATE OPPORTUNITY TO NEGOTIATE

ITS TERMS.

2 - INSTALLATION

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de grabación de Harris

Harris

Harris FlexStar HDE-200 Guía

Harris

Harris PRO2000 Manual de usuario

Harris

Harris BMXDIGITAL 99-1200-0 Manual de usuario

Harris

Harris TVS-D 660 Manual de usuario

Harris

Harris Legacy 99-1300-0 Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado