Harman JBL WIND Manual de usuario

Owner´s manual

2 in 1 - On the road and on the go speaker

Product Overview

Package Contents

1. 1x WIND BT Speaker main unit

2. 1x USB charging cable

3. 1x Aux cable

4. 1x Carabiner

5. 1x Bracket

Compatibility

The product is compatible with BT enabled devices, including I phone,

I Pad, I Pod, Android Phone, tablets and etc. It is also compatible with

devices which have 3.5mm earphone jack to connect to the product.

Features

Wireless and To-Go

Easy connection with your electronic devices wirelessly and use it portably.

The wireless working range is around 8-10 meters (30 feet), no cords and

no hassle.

Hand free calling on-the-go

With a built-in microphone, the unit takes on your calls just free and easy.

2-in-1 design for use in bicycle and backpack

Congratulations for purchase of WIND! To ensure a proper use of WIND

please read this manual before you start to use. Also, please safely keep

this manual for future reference and trouble shooting.

1x User's manual

Carabiner and bicycle bar mounter with bracket are provided for two uses

in carrying it over.

Product Interface

(1) Handle for hanging a carabiner

(2) Play/pause (BT, aux and micro SD / TF), FM Scan and Mute (Radio)

(3) Volume + ( Long press ) - All functions

(4) Volume –( Long press ) - All functions

(5) "ON / OFF" and "Source" button (BT, aux, micro SD TF and radio)

(6) Connection for USB charging

(7) AUX input

(8) Micro SD / TF Card

(9) Microphone

(10) LED battery charge indicator



Next (Short press) - BT, micro SD / TF and radio functions

Lap (Short press) - BT, micro SD / TF and radio functions

BT connection LED indicator(11)

Getting Started

Two easy steps to get your JBL WIND ready to enjoy.

Step 1: Charging before use

Connect your WIND BT Speaker to a USB power source

using the enclosed

USB charging cable.

Step 2: Connecting to play

BT connection

Direct Connection

As soon as the portable WIND box is turned on, the BT indicator will blink and

signal to confirm that the unit is currently in BT pairing mode. Access the BT

settings on your phone, tablet or computer to locate the device called "JBL

WIND" and press to select. A signal will be issued to confirm that the device

has been satisfactorily paired in seconds. The next time you use the WIND

device, the product will automatically connect to your devices once pairing

has been performed. To disconnect the device, press the "Play / Pause"

button for 5 seconds and it will start pairing a new available device.

OBS.: This process needs to be performed only on first use.

region as soon as your radio is ready for use.

press the "Play / Pause" button up to start scanning th FM radios of your

When you turn on your JBL WIND for the first time, after playing the radio,

Click the "+" and "-" buttons to advance and return the radios respectively.

beep, it will start playing the FM radio.

As soon as WIND is turned on, press the source select button again, after the

FM Radio connection

The WIND Portable Box can also connect to devices that have a handset

output or a line-out using the AUX cable shipped with the device.

Micro SD / TF card

Play your music through a micro SD / TF card. Click the "source" button to

switch between signal inputs.

Speaker Phone

After paired your mobile phone to

WIND with BT, the speaker phone function

can be used.

Make call: Call will automatically transfer to the speakerphone. If not, tap

play/pause button;

Answer call: Tap play/pause button to answer the incoming call;

when it is not in a call.

play/pause button to redial last numberDouble tapRedial last number:

Reject call: Hold play/pause button to reject the incoming call;

on during the call to end the call;End call: Tap play/pause butt

Laptop / notebook / PC

Connection

for 10 minutes before turn on the unit.

the unitif the unit is not used longer than 7 days, please chargeNote:

LED indicator will stay on while charging, and goes off after fully charged.

The4.

fully charge the BT speaker;tohours2It will take about3.

indicator will light up while charging;

n the unit. The chargingiConnect the Micro USB jack to the USB charging port2.

;source (like PC, USB power adapter…etc.)

Connect the standard USB end of the supplied USB cable to a USB power1.

the speaker when you hear the beep.

the speaker, please charge

hen the power is low, a beep will comes out fromW

Charge

As the BT versions for these types of devices vary greatly, the connection methods

will differ as well. If you cannot connect with the WIND BT Speaker using the previous

method instructed, you may need to install a new version of the BT driver.

Please refer the instructions of device for details.

Technical parameters

Note: All specifications are subject to change without notice.

place

blank-Do not set the unit in a damp, high temperature or a sun point

unit and place the unit with accessories into the package

If the unit will not be used for an extended period of time, power off the

rageSto

these can cause the casing to be warped or discolored

Do not use alcohol, benzene, thinners or other chemical detergents as

free cloth to wipe gently-Use a soft, dry, lint

Power off the unit first before clear

instructions below before cleaning the unit:Please follow the

Maintenance

SPL Max: 80dB

IP45 (OBS.: With the connections cover closed)

Memory card capacity: 32GB

Working atmosphere: 0°C 40°C / 20% 90% RH

Working range: up to 10m

BT Version: 4.1

BT Profile Supported: A2DP, AVRCP

Output power: 3W RMS

Built-in Lithium Ion battery: 3.7V 800mAh

Power Supply: USB 5V, 1A

Product name: Wind

Check if the BT indicator light is on. If the indicator light is off, please press



Solution:

successfully after multiple attemptsIssue: Pairing is un

Troubleshooting

the power button to turn the unit on. If the BT indicator light still doesn't come

on after pressing the power button, please charge the unit.

Check for other BT devices around the surroundings that may interfere

and charge if necessary.

Please check if the battery level of the unit and the BT device

that may interfere with the signal.

Avoid using the device between concrete or other building structures

Solution:

Issue: Interference or static during playback

attempt pairing again.

Unplug any cables plugged into the AUX IN, restart all devices and then

Power off and then power on the unit to restart the BT function of the unit



devices off.with searching and turn

or your BT device.

Issue: Radios are not working well.

Solution:



Check that the radios have been scanned according to instructions on page 4

heating installation, cooking stove or other heating devices);

t from any overheating devices (such as radiator,Protect the using of the uni

glass, pot, and please avoid placing candle on the speaker surface as well;

Do not place any ware with full water on the top of the unit, such as vase,

contact with water;

ng the unit nearby basins or sinks where it may come inAvoid usi

Do not drop, unpack, open, beat,curve, prink and burn the unit;

;cause the unit to topple and fall, resulting in possible damage or injury

Always position the unit on a stable and level surface. Unstable surface can

listed below:

the guidelines

free operation, please abide by

order to make sure the accident

This product is specially designed based on the full attention to safety; in

Safety Instructions



Regardless of what reasons cause the unit damage, have the repair

performed only by on authorized JBL dealer or service center;

If you want to do the cleaning, please turn off the unit and unplug the power

cable from the outlet first;

Set the volume properly to prevent injury to the unit and your health;

recycling.

product was purchased. They can take this product for environmental safe

and collection systems or contact the retailer where theuse the return

sustainable reuse of material resources. To return your used device, please

uncontrolled waste disposal, recycle it responsibly to promote the

To prevent possible harm to the environment or human health from

sehold wastes throughout the EU.should not be disposed with other hou

This marking indicates that this product.Correct Disposal of this product

only with the same or equivalent type.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace

the apparatus.

No naked flame sources, such as lighted candles, should be placed on

ne, fire or the like.excessive heat such as sunshi

The battery (battery or batteries or battery pack) shall not be exposed to

WARNING:

Warning:

and casual use on a bicycle as an entertaining device. We are not liable to risk

in using WIND while you ride on a bicycle for speed racing, BMX performance,

down hill riding, jumping and etc. Please always use WIND on a bike in a manner

of safe riding.

WIND is designed as multipurpose speaker which includes common

HARMAN International Industries, Inc.

Headquarters:

400 Atlantic St.

Stamford, CT 06901 - USA.

www.harman.com

Harman do Brasil Industria Eletrônica e Participações Ltda. is a trademark of

Harman International Industries, registered in the United States and/or other

countries. Features, specifications and appearance are subject to change without

notice.

Printed in China

Otros manuales para JBL WIND

Tabla de contenidos

Otros manuales de Oradores de Harman

Harman

Harman JBL Flip 6 Manual de usuario

Harman

Harman Harman/Kardon CITATION OASIS DAB Manual de usuario

Harman

Harman JBL ARENA Series Manual de usuario

Harman

Harman JBL Duet Guía de inicio rápido

Harman

Harman JBL SRX800 Series Manual de usuario

Harman

Harman JBL DD65000 Manual de usuario

Harman

Harman JBL STAGE 402 Manual de usuario

Harman

Harman JBL PARTYBOX 100 Manual de usuario

Harman

Harman JBL C Series Manual de usuario

Harman

Harman JBL G03 Manual de usuario

Harman

Harman Harman/Kardon ONYX STUDIO 5 Manual de usuario

Harman

Harman JBL Professional PRX600 Series Manual de usuario

Harman

Harman JBL Intellivox ADC-V90 Manual de usuario

Harman

Harman harman/kardon CITATION SURROUND Manual de usuario

Harman

Harman JBL VERTEC VT4888DP-DA Hoja de especificaciones

Harman

Harman JBL G Series Manual de usuario

Harman

Harman JBL PARTYBOX 1000 Manual de usuario

Harman

Harman Infinity KAPPA 53XF Manual de usuario

Harman

Harman JBL CLIP 4 Manual de usuario

Harman

Harman JBL CONCERT 9631F Manual de usuario

Harman

Harman JBL 4309 Manual de usuario

Harman

Harman R152 Manual de usuario

Harman

Harman JBL GO Manual de usuario

Harman

Harman JBL Professional EON ONE Compact Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario