Harman JBL Professional GSF3 Manual de usuario
Installation Guide
GSF3 & GSF6 Landscape Speakers
CAUTION: Installation must be done by qualified persons using safe
installation standards.
The installer is responsible for proper selection and use of mounting hardware
and processes to install the speakers in a safe manner.
Wire Connection
•CABLE-- The GSF speakers have a captive 1-meter long cable for bare-wire connection via an external installer-provided
weather-proof junction box.
oPolarity -- The red wire is + (positive) and the black wire is – (negative).
oWire Gauge –The wire gauge is 18 AWG (1 mm2).
oWire Jacket –The wire jacket is 5 mm (+0/-05.mm) in diameter.
oConnecting -- Use proper professional wire nuts or other safe connectors that are appropriate for the installation
conditions and that are sized properly for wire gauge(s) and number of wires to be connected together in the
connector.
oRouting –When using the ground-stake or L-bracket base, the cable can be routed through the base.
Black = - (negative)
Red = + (positive)
CABLE
Bare-Wire End of Cable
Setting TAP SELECTOR SWITCH
(TAP SELECTOR SWITCH is located on the bottom of the speaker enclosure)
•Rotate bottom-panel TAP SELECTOR SWITCH to select between:
oGSF3:
8Ω(ie, low-impedance / direct)
15W or 7.5W for either 70V or 100V distributed speaker system
3.75W for 70V distributed speaker system only
oGSF6:
8Ω(ie, low-impedance / direct)
30W or 15W for either 70V or 100V distributed speaker system
7.5W for 70V distributed speaker system only
Installing GROUND-STAKE BASE or L-BRACKET BASE to LOUDSPEAKER
•The speaker comes with both a GROUND-STAKE BASE and an L-BRACKET BASE. Use whichever one applies to the installation
requirements of the project.
•At the bottom of the LOUDSPEAKER there is a SOCKET. Three-head set screws come with the speaker (packaged in a separate
pouch) for attaching the chosen base into the SOCKET.
oScrew Dimensions -- GSF3: M4 x 0.7 – 5mm, with 3 mm hex drive
GSF6: M4 x 0.7 – 9mm, with 3 mm hex drive
(GSF SPEAKER shown with L-BRACKET BASE)
(continued ↓)
ROTARY TAP SELECTOR SWITCH
•Use the included 3 mm hex wrench to tighten the 3 set screws to hold the chosen base securely.
•For GROUND-STAKE BASE, press base into the ground.
(GSF SPEAKER shown with included GROUND-STAKE base)
•For L-BRACKET BASE, securely attached base to either horizontal surface (such as decking or railing) or vertical surface (such as the
side of a building or post). Use the proper attachment hardware for the material and characteristics of what it’s being attached to.
Aiming LOUDSPEAKER
•Loosen HINGE BOLT by using included 4 mm hex key. Aim loudspeaker, and then retighten.
•Aiming Speaker at Downward Angle Provides Best Drainage – The greatest water drainage and reliability can be achieved by
aiming the speaker at a slight downward aiming angle.
•Maximum Upward Aiming Angle of 30° -- For when aimed slightly upward, there is a drain hole at the bottom of the speaker
that helps to drain water from the front of the speaker’s driver at aiming angles up to a maximum 30°. At upward aiming
angles greater than 30°, water can pool on the driver, potentially causing damage.
Ingress Protection Rating
•IP66 -- The GSF speakers are rated IP66 per IEC529 (highly protected against ingress from dust and water). However, the
speaker is not rated for submersion in water, so steps must be taken to ensure that no immersion situation occurs.
HINGE BOLT
(use included 4 mm hex key)
(Shown with included L-BRACKET base)
CAUTION WHEN RE-AIMING SPEAKER:
When ground-stake is utilized, re-aiming speaker
horizontally requires either: a) completely pulling
stake from ground and re-pressing back into
ground at new aiming angle, or b) loosening 3 set
screws, re-aiming speaker, and re-tightening set
screws. Trying to rotate speaker with stake in
ground and set screws tightened could result in
damage or breakage.
CAUTION WHEN ROTATING ON L-BRACKET:
When L-bracket is utilized, rotating speaker on L-
bracket requires loosening 3 set screws, rotating
speaker, and re-tightening set screws. Trying to
rotate speaker with set screws tightened could
result in damage or breakage.
SAFETY-CABLE ATTACHMENT POINT
•Attach installer-supplied secondary safety cable (ring lug end recommended) to M6 SAFETY CABLE ATTACHMENT INSERT POINT
using installer-supplied M6 x 12 mm or shorter (12 mm is max depth of the threaded insert – ensure a minimum of 4 threads of
engagement) bolt through the ring lug at end of safety cable. Attach other end of cable (with appropriate end-type and
attachment hardware for the building structure) to a separate attachment location on building structure (not the same spot as
used for attaching the WALL BRACKET).
CONTACT INFORMATION
Harman Professional Headquarters
8500 Balboa Blvd.
Northridge, CA 91329 USA
+1 (800) 852-5776
www.jblpro.com
Worldwide Customer Service
Monday - Friday 8:00am - 5:00pm PCT
+1 (800) 8JBLPRO (800-852-5776)
support@jblpro.com
www.JBLservice.com
HARMAN USA Technical Support
Monday - Friday 8:00am - 5:00pm
+1 [844] 776-4899
hprotechsupportusa@harman.com
www.harman.com
Harman Professional London
Harman Westside
Hemel Hempstead, HP3 9TD
London, UK
+44 (0)1707 668034
www.harman.com
Harman Professional Singapore
108 Pasir Panjang Road
#02-08 Golden Agri Plaza
Singapore 118535
+65 6870-5000
www.harman.com
Harman Professional Shenzhen
20F, China Merchants Port Plaza, #1
Gongye 3rd Road, Shekou, Nanshan Dist.
Shenzhen, 518067, China
+86 755 8634 3702
www.harman.com
Harman Professional India
Prestige Technology Park Jupiter 2A Block, 4th Floor
Marathahalli Ring Road
Bangalore 560103, India
+918049365905
www.harman.com
Professional Contacts, Outside the USA:
Contact the JBL Professional Distributor in your area. A complete list of JBL Professional international distributors is provided at our U.S.A. website:
www.jblpro.com
JBL Professional ǀ8500 Balboa Blvd. ǀNorthridge, CA 91329
GSF Guide, Rev A3
12/2022
M6 SAFETY-CABLE ATTACHMENT POINT
Threaded 6 mm x 12 mm
(shown with rubber cover removed)
RING-LUG-SAFETY CABLE
Este manual sirve para los siguientes modelos
1
Otros manuales de Oradores de Harman
Harman
Harman MIB GLOBAL ENTRY Manual de usuario
Harman
Harman JBL Performance Series Manual de usuario
Harman
Harman JBL XTREME 4 Manual de usuario
Harman
Harman JBL BOOMBOX2 Manual de usuario
Harman
Harman JBL CONCERT 521 Manual de usuario
Harman
Harman JBL CLIP 4 Manual de usuario
Harman
Harman JBL FLIP6 Manual de usuario
Harman
Harman JBL GO2+ Manual de usuario
Harman
Harman Infinity REFERENCE Series Manual de usuario
Harman
Harman JBL EON10-G2 Manual de funcionamiento
Harman
Harman JBL PARTYBOX 1000 Manual de usuario
Harman
Harman JBL AUTHENTICS 300 Manual de usuario
Harman
Harman JBL Professional PRX800 Series Manual de usuario
Harman
Harman JBL CRUISE Manual de usuario
Harman
Harman JBL FLIP4 Manual de usuario
Harman
Harman JBL XTREME3 Manual de usuario
Harman
Harman JBL GO Manual de usuario
Harman
Harman harman/kardon HK OMNI 10 Manual de usuario
Harman
Harman JBL BOOMBOX 2 Manual de usuario
Harman
Harman CITATION SURROUND Manual de usuario
