Harman JBL LINK BAR Guía de instalación
LINK BAR FAQ
1) How do I perform factory reset on my LINK BAR?
You can reset the LINK BAR via the settings menu. Device Preference -> Reset.
2) What are the sound modes on the LINK BAR?
There are 4 sound modes, you can select in the settings menu: Sound -> EQ mode
a. Standard
b. Movie
c. Music
d. Voice
“Standard” sound mode is the default setting.
3) Does the LINK BAR remote control use Bluetooth or IR connection?
The LINK BAR remote control uses a Bluetooth connection.
4) How do I pair my LINK BAR remote control?
1. Press and hold both “HOME” and “BACK” buttons on the remote control for 3
seconds. A Green LED light will flash on the remote control to indicate pairing
mode.
2. Press and hold the Bluetooth Button ( ) on the LINK BAR.
3. The LINK BAR remote control will appear in the pairing menu on the right hand
panel. Wait 10s to start the pairing process as indicate on the display.
5) How do I active the microphone on the remote control?
Press the button on the remote control to activate the Google Assistant.
Speak directly into the microphone (no need to say the hotword “OK Google” or “Hey
Google”). The LINK BAR will respond accordingly.
6) Example of voice commands that can work on your LINK BAR
Alarms and Timers
Set timer for 5 minutes
Answers
How many liters in a gallon?
How Tall is Tom Cruise?
Calendar
When is my next meeting?
Device Actions and
Settings
turn on Bluetooth
Switch to HDMI 1
return to Android TV home page
7) How do I enable 10-bit color on HDMI inputs?
To get 10-bit color output with HDR, the “HDMI UHD deep color option”on your TV
should be turned on. Refer to TV’s manual to turn this option on.
8) What is the recommended distance between the TV and LINK BAR for wall mounted
installation?
We recommend at least 50mm (2 inches) distance between the TV and LINK BAR.
9) The 4 LED dots change to amber on my LINK BAR soundbar. What does this mean?
The amber LED lights indicate that you have muted the microphone and the Google
Assistant. The LINK BAR will not react to any voice keywords or user commands unless
you unmute the microphones. You can unmute it by switching ON the PrivicySwitchTM on
the bar.
10)How do clean my LINK BAR?
Clean your LINK BAR with a soft dry cloth.
11)Why can’t I play my local Spotify playlist on the LINK BAR?
Go to the Google Play Store, download and login to Spotify. To play your own created
playlist, start with "Ok Google, Play my Playlist (name of your playlist) on Spotify".
12)If I have multiple JBL LINK speakers - will they all react to "Hey Google" or "OK
Google"?
If all of the LINK speakers are under the same user account, the speaker with the best
microphone reception will respond.
13)What does Google do with all the data when using LINK BAR?
increase the volume by 5%
open settings menu
Multi-dialog queries
Q1:population of France
Q2: what about England
Local & Navigation
where is the nearest Starbucks
Media
play thunder by Imagine Dragons
Netflix
Play Dr. Strange on Netflix
Skip to xx minutes
News
NPR news
Personal Answers
Show my flight status
Personality
tell me a fun fact
Personality features
let's play lucky trivia
Reminders
remind me to buy milk at 7pm,
remind me 10 mins before Big Bang Theory tonight
Shopping
add movie tickets to the shopping list
Smart Home
dim the lamp, turn on lights
Google uses the data to make their services faster, smarter, and more useful to you,
such as providing better search results and timely traffic updates.
14)Do I need to link my Google account to my LINK BAR?
Yes, your LINK BAR requires a Google account to operate. Your search history on the
LINK BAR will appear in your Google account's search history. Also, if you give the LINK
BAR permission, it may access your data saved in other Google services, such as
Calendar and Gmail in order to answer questions you ask.
15)Will my LINK BAR share all information with Google?
Google has high privacy rules and one of them is not to share end-user data with any
third-party apps. Apps like Uber do require you to share personal details for booking,
which you already accepted when using the service.
16)How long does the LINK BAR keep my data?
Any conversation or search history is stored in the cloud via your Google account and is
saved until you choose to delete it in the Google Home app. The LINK BAR does not
keep or store any data locally.
17)What kind of data does LINK BAR collect?
Only data to make Google Assistant more efficient and Google services faster is
collected. Google Assistant learns over time to provide better and more personalized
feedback.
18)Is my data safe when using LINK BAR?
Yes, Google services are protected by one of the world’s most advanced security
infrastructures. Conversations within your LINK BAR is encrypted by default.
19)What audio codecs will the LINK BAR support?
MP3, AAC-LC, HE+ACC, FLAC, Vorbis, Wav, CELT/opus are supported via Wi-Fi
streaming. SBC and AAC are supported via Bluetooth.
20)How do I play music from my mobile phone via Bluetooth
1. Short press the Bluetooth button ( ) on the LINK BAR.
2. Enable Bluetooth feature on your mobile phone.
3. Search and select “JBL LINK BAR” in the device menu.
21)Can I use my LINK BAR without turning ON the TV?
The LINK BAR is always ON, you can ask the LINK BAR questions whether your TV is
ON or OFF.
22)What kind of video / music services are supported by the LINK BAR
You can download video and music service from Google Play Store. Different services
may vary by location.
23)Can I stream videos from my phone / tablet to the LINK BAR using Chromecast?
Yes, simply press the cast icon ( ) on your mobile phone or tablet and choose JBL
LINK BAR from the list, make sure your mobile phone or tablet and the LINK BAR are
connected to the same network.
24)My LINK BAR is not responding to my voice command, what should I do?
oCheck if the PrivicySwithTM is OFF.
oGo to settings menu, “Device preference” “Google”, check “OK Google”
detection is enable.
oMake sure there are no objects place on top of the LINK BAR which may block
the microphones.
25)How do I perform a software upgrade for my LINK BAR
You will see a notification in the recommendation row on your Android TV when there is
an upgrade is available. The system will download the firmware and apply the update
after your confirmation. You can also manually check for updates. Go to settings menu,
select “About”, “System Update” .
26)Can I connects a subwoofer to my LINK BAR?
Yes, the JBL SW10 wireless subwoofer is the ideal subwoofer for your LINK BAR.
Please contact your JBL dealers to purchase.
27)List of supported apps via voice control (Google Assistant)
https://assistant.google.com/explore/c/10/
28)What is the recommended Internet connection for the LINK BAR?
It is recommend to connect the LINK BAR via an Ethernet or connect to a 5G Wi-Fi
network.
29)What is the recommended Internet speed for the LINK BAR?
The minimum Internet speed is at least 25Mbps (megabit per second) or above for the
best performance.
30)How do I pair the JBL SW10 wireless subwoofer to my LINK BAR if pairing does not
happen automatically?
1. Turn on the soundbar and the subwoofer. If the connection is lost, the LED
indicator on the subwoofer blinks slowly.
2. Press the “Subwoofer Pairing”button on the SW10 subwoofer to enter pairing
mode. The LED indicator on the subwoofer blinks quickly.
3. Press the “Subwoofer Pairing”button on LINK BAR, the LED indicator on the
LINK BAR blinks quickly
4. If successful, the pairing LED indicator on both subwoofer and LINK BAR will be
ON. If pairing fails, the indicator on the subwoofer blinks slowly.
5. If the pairing fails, repeat the steps above. If you are still experiencing problems,
please try to switch off all wireless devices in the home (such as routers, TV sets
with wireless function, telephones, computers, etc), then try again. This may be
overcrowding on the 5GHz frequency, which often causes problems. By
eliminating all the activity makes space for the LINK BAR to establish its
connection. You should be able to pair without problems. Once pairing is
complete, you can switch your devices on again
31)Why is the video picture quality poor? Why am I experiencing poor quality playback?
The quality of content depends on your Internet bandwidth. The minimum Internet speed
is at least 25Mbps (megabit per second) or above for the best performance.
Otros manuales para JBL LINK BAR
1
Tabla de contenidos
Otros manuales de Sistema de altavoces de Harman
Harman
Harman JBL XTREME2 Manual de usuario
Harman
Harman JBL BAR 800 Manual de usuario
Harman
Harman JBL CINEMA SB130 Manual de usuario
Harman
Harman JBL BAR 500 Manual de usuario
Harman
Harman JBL BAR 2.1 Manual de usuario
Harman
Harman JBL BAR 700 Manual de usuario
Harman
Harman JBL BAR 9.1 TRUE WIRELESS SURROUND Manual de usuario
Harman
Harman JBL BAR 1300 Manual de usuario
Harman
Harman JBLBAR800PROBLKEP Manual de usuario
Harman
Harman JBL BAR 1000 Manual de usuario
Harman
Harman JBL BAR 9.1 Manual de usuario
Harman
Harman JBL PartyBoxEncore Manual de usuario
Harman
Harman JBL BAR 9.1 Manual de usuario
Harman
Harman JBL BAR 300 Manual de usuario
Harman
Harman JBL Bar 5.1 CNTR Manual de usuario
Harman
Harman JBL BAR 800 Manual de usuario
Harman
Harman JBL BAR 300 Manual de usuario
Harman
Harman JBL BAR 800 Manual de usuario
Harman
Harman JBL CINEMA SB400 Manual de usuario
Harman
Harman JBL BAR 2.1 DEEP BASS MK2 Manual de usuario
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario