HARDKORR HKPBATTMONBT Manual de usuario
INSTRUCTION MANUAL
v1.0.5 - August 2022
BLUETOOTH BATTERY MONITOR
WITH A SHUNT
2
In doing so, you now have the assurance and peace of mind that comes
from purchasing a product that has been manufactured to the highest quality
standards.
Our aim is for you to be completely satisfied with your purchase, and
therefore your new Hardkorr product is backed by a comprehensive 2-year
warranty and an outstanding after-sales customer service team.
We hope you will enjoy using this product for many years to come.
If you require technical support, or in the unlikely event your purchase
appears to be faulty, please contact our support team for immediate
assistance. Contact details for each country are contained within this user
guide.
General Information and Safety Instructions .................................. 4-6
Contents........................................................................................ 7
Specifications................................................................................ 8
Overview ..................................................................................... 9
Wiring Diagram .......................................................................... 10
Operation ................................................................................... 11
Frequently Asked Questions .......................................................... 12
Warranty ............................................................................... 14-15
Congratulations on purchasing this high quality Hardkorr product.
INTRODUCTION
3
GENERAL INFORMATION &
SAFETY INSTRUCTIONS
Our Bluetooth Battery Monitors offer unrivalled quality, durability and value
for money.
This battery monitor, also known as a coulometer, displays essential battery
information through a dedicated monitor or by connecting your phone via
Bluetooth. By using a 500A shunt (350A continuous), highly accurate data is
collected such as charge level (Ah and %), live current draw (A), live voltage
(V) and live watts (W). The apparatus also includes an integrated alarm
function to alert you when your battery is discharged to a set level, and short
circuit and reverse polarity protection technology.
This Battery Monitor is suitable for all common battery types including AGM,
wet, gel, calcium and lithium.
GENERAL PRODUCT INFORMATION
PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE
This manual contains important safety instructions for your Bluetooth Battery
Monitor.
Do not operate the Battery Monitor or modify the installation unless you
have read and understood this user manual. Pay particularly close attention
to CAUTION and WARNING statements.
Hardkorr recommends that the battery be installed by an appropriately
qualified professional.
4
GENERAL INFORMATION &
SAFETY INSTRUCTIONS
DISCLAIMER
While caution has been taken to ensure the accuracy of the contents of this
guide, Hardkorr assumes no responsibility for errors or omissions. Please
note that specifications and product functionality may change without notice.
WARNING
• DO NOT alter or disassemble the battery monitor under any
circumstances. Any effort made to modify, repair or attempt to gain
access to the electronics may void the unit warranty.
• Avoid all contact with water, rain, snow or spray. Failure to do so may
lead to permanent irreparable damage to the internal electronics and
may void the unit warranty.
CAUTION
The battery monitor should not be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are supervised or have been instructed on how to
use the appliance by a person responsible for their safety.
Mounting the battery monitor in a location that is exposed to sunlight may
shorten the lifespan of the LCD screen.
5
1x LCD display module
1x 6m shielded cable
1x 100V/500A shunt
1x 6m B+ wire
PACK CONTENTS
1x Mounting indicator card
1x Set of mounting screws and pad
6
Supply voltage 10-120V
Max measured current 500A
Weight (LCD screen) 11 0 g
Battery capacity 10-1000Ah
Capacity accuracy ±1%
Dimensions (LCD screen) 125 x 82 x 21mm
Voltage accuracy ±1%
IP rating IP20
SPECIFICATIONS
Current accuracy ±1%
Power consumption < 1W
Bluetooth Yes
Operating temperature -20°C to 50°C
Standards CE, RoHS, RCM
7
OVERVIEW
Dynamic Charge
Indicator
Live Battery
Capacity
Live Current
Live Voltage
Bluetooth
Connection
Capacity (%)
Time Remaining
Live Power
Max Capacity
Voltage
Battery Capacity
Low Capacity Alarm
Exhausted
Capacity Voltage
Quit
Select
Modify Value
Enter/Set/Confirm
8
INSTALLATION &
OPERATION
CONNECTING TO MULTIPLE BATTERIES IN SERIES
Connect your battery monitor to multiple batteries wired in series as shown below.
Ensure you use cables of appropriate gauge for your system.
1. Connect the shunt to the LCD monitor using the supplied shielded cable.
2. Connect the shunt to the positive circuit of the battery by running the supplied
cable from one of the two terminals marked “B+” on the shunt to the positive
terminal on your battery. Ensure you keep this cable as short as possible i.e. cut
it to suit the length you require.
3. Connect the shunt to the negative circuit of your battery. Run a cable from the
terminal marked “B-” on the shunt to the negative terminal on the battery (keep
this cable as short as possible), and from the terminal marked “P-” on the shunt
to your system ground.
B- B+ B+ P-
-NEG +POS
Shielded Wire
(Supplied)
6m B+ Wire
(Supplied)
CONNECTING TO YOUR BATTERY
B-
B+ B+
P-
-NEG +POS -NEG +POS
-NEG+POS -NEG+POS
9
INSTALLATION &
OPERATION
CONNECTING TO MULTIPLE BATTERIES IN PARALLEL
CONTROL PANEL OPERATION
Connect to multiple batteries
wired in parallel using
busbars, as shown.
All cables connecting
batteries to the busbars
must be of equal
length. Ensure you use
cables and busbars of
appropriate size for
your system.
1. When asleep, press any button to wake up the battery monitor to enter the
main screen showing battery capacity, capacity percentage, voltage, current,
and remaining time.
2. On the main screen, press the button to enter the setting screen.
a. On the setting screen, press the button to return to the main screen.
You can also press and hold the button to see the ID of the device to
which you are connected.
b. On the setting screen, press the button again to start editing settings.
Doing so will highlight the first editable setting by changing the number
to flashing red.
c. Press the button to select setting you want to edit and then the
button to modify its value.
d. Once you have finished altering the settings, press the button to save
all changes and return to the main screen.
3. On the main screen, long press the button to clear the battery capacity
calibration, or long press the button to set the battery capacity to 100%.
B- B+ B+ P-
-NEG +POS -NEG +POS
-NEG +POS -NEG +POS
Busbar
Busbar
10
INSTALLATION &
OPERATION
When you first install the battery monitor or connect it to a new battery, you will
need to configure it to match the parameters of your battery. NOTE: you must
ensure your battery is fully charged before you commence the battery
monitor setup process.
1. Press any key to wake up the monitor screen (if required), then enter the
settings screen by pressing the button.
2. Press the button again to highlight the first digit in the “CAPACITY (Ah)”
section (it will start flashing red). Use the button to change the value
and the button to move between digits.
3. After setting the capacity, press the button again to move to the “MAX
VOLT (V)” section. Use the process described above to set this to the float
voltage of your battery.
4. Continue to the “ALARM (Ah)” section. The battery monitor will sound an
alarm when your battery is discharged to the value you set here.
5. Set the value in the “MIN VOLT (V) section. This setting will depend on your
battery type and represents the voltage at 0% capacity. The recommended
settings for common battery types are as follows:
Li-ion: 10.0V
AGM, Gel, Wet, Calcium: 10.8V
Finally, return to the main screen by pressing the button, hold down the
button to clear any previous battery capacity calibration, and hold down the
button to set the new battery capacity full calibration.
CAUTION
On the setting screen, if you press the button before saving, all changes will be
discarded.
INITIAL CONFIGURATION
Tabla de contenidos
Otros manuales de Accesorios para cámaras de HARDKORR
