Harbor Freight Tools U.S. GENERAL 64166 Instrucciones de montaje
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
56" Double Bank
Top Chest
64863
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18h
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2018 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 64166
Specifications
Total Combined Weight Capacity
(Evenly distributed from bottom up.) 1160 lb
Page 3For technical questions, please call 1-888-866-5797.Item 64166
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface
capable of safely supporting loaded Chest.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest.
Do not allow children to play with or near this item.
3. Do not exceed weight capacities,
evenly distributed from bottom up.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure. Do not exceed
capacity of bench or shelf supporting Top Chest.
4. Do not open more than one Drawer at once.
5. Empty, close, and lock Drawers before moving.
6. Use only on a flat, level, hard and smooth surface
capable of safely supporting loaded Chest.
7. Do not lift while loaded.
8. Use as intended only.
9. Inspect before every use;
do not use if parts are loose or damaged.
10. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Page 4 For technical questions, please call 1-888-866-5797. Item 64166
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Assemble on a flat, level, hard and smooth surface
capable of safely supporting loaded Chest.
2. Attach Side Handles (3) using Handle Bolts (2).
Handle
Bolts
Handle
Figure A
3. Choosing location:
a. If stacking Top Chest on
Bottom Cabinet, refer to Bottom Cabinet
Owner’s Manual for Final Assembly,
Operation and Maintenance instructions.
b. If using Top chest separately from
Bottom Cabinet, refer to Operation and
Maintenance Instructions on page 5.
Page 5For technical questions, please call 1-888-866-5797.Item 64166
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Empty all Drawers.
2. Close all Drawers and lock them.
3. If stacked on Bottom Cabinet, to
prevent tipping, push/pull using supplied
handle on Bottom Cabinet only.
4. If using separately from Bottom Cabinet, hold both
handles securely and carry the Chest to the desired
location. Have someone assist as needed.
5. Place only on a flat, level, hard and smooth surface
capable of safely supporting loaded Chest.
6. Unlock Drawers and fill Chest evenly, from bottom
to top. Do not exceed weight capacities.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.
1. PERIODICALLY, inspect the general
condition of the Chest. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
2. Wipe external surfaces of the Chest with clean cloth.
3. Lubricate Drawer Slides as needed.
Page 6 For technical questions, please call 1-888-866-5797. Item 64166
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Diagram
Parts List
Part Description Qty
1 Lid 1
2 Handle Bolt (M6x45) 4
3 Side Handle 2
4 Aluminum Trim 2
5 Ball Bearing Drawer Slide 20
6 Drawer Handle Label 8
7 Drawer Handle 8
8 Drawer Liner (not shown) 3
9 Drawer Latch 8
Part Description Qty
10 Lock 2
11 Key 4
12 Aluminum Trim 1
13 Gas Strut 2
A Drawer 3
B Drawer 1
C Drawer 3
D Drawer 1
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.
Page 7For technical questions, please call 1-888-866-5797.Item 64166
Assembly Diagram
1
2
2
3
4
5
A
B
67
9
C
D
4
11
12
10
10
11
13
13
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Tabla de contenidos
Otros manuales de Almacenamiento de herramientas de Harbor Freight Tools
Harbor Freight Tools
Harbor Freight Tools 99681 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools Storehouse 39420 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 6843 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 94582 Guía de referencia rápida
Harbor Freight Tools
Harbor Freight Tools 96138 Manual de lista de piezas
Harbor Freight Tools
Harbor Freight Tools 47078 Guía de referencia rápida
Harbor Freight Tools
Harbor Freight Tools 91835 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 60723 Instrucciones de montaje
Harbor Freight Tools
Harbor Freight Tools Storehouse 90928 Guía de referencia rápida
Harbor Freight Tools
Harbor Freight Tools 47878 Guía de referencia rápida
