Harbor Freight Tools 92049 Manual de usuario
BEVERAGE HOLDERBEVERAGE HOLDER
BEVERAGE HOLDERBEVERAGE HOLDER
BEVERAGE HOLDER
INSULAINSULA
INSULAINSULA
INSULATED - 12 VDCTED - 12 VDC
TED - 12 VDCTED - 12 VDC
TED - 12 VDC
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit ourWeb site at http://www.harborfreight.com
Copyright © 2004 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor FreightTools.
For technical questions and replacement parts, please call 1-800-444-3353
92049
SKU 92049 Page 2
Specifications
ITEM DESCRIPTION
Bottle Capacity 32 fluid ounces
Cup Capacity 12 fluid ounces
Power Consumption 12 VDC from vehicle power socket
Power Cord 5 feet, 18 AW G cable, vehicle cigarette
lighter adapter plug
Warming Temperature 150 degrees F, ±10 degrees
Fuse 10 amp fuse inside adapter plug
Bottle Material Stainless steel
Overall Dimensions 11.5 (H) x 3.75 (dia.) inches
W eight 2 lbs. (em pty)
SaveThis Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, and operating and maintenance procedures. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the
manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
Warning:When using this product,basic safety precautions should always be
followed to reduce the risk of personal injury and damage to unit.
Read all instructions before using this tool!
1. Disconnect power when not in use.
2. Do not drink directly from the heated Beverage Holder.
3. Do not overfill, tilt or shake immediately after filling with a hot beverage.
4. Do not touch the inside of the Beverage Holder when hot.
5. Do not connect the Beverage Holder power cord to a 12VDC socket when
cold beverages are contained.
6. Do not operate the Beverage Holder if the power cord or connector are
damaged.
7. Do not submerge the Beverage Holder in water.
8. Do not expose the operating Beverage Holder to extreme, external heat.
9. Do not overtighten the Dispenser Cap or Cup.
10. Not intended for use by children.
SKU 92049 Page 3
11. Never leave the Beverage Holder unattended while connected to the 12VDC
power source.
12. Dairy and other beverages that spoil easily should not be contained for
prolonged periods of time.
13. Close DispenserValve and secure the stainless steel Cup when beverages
are contained.
14. Before using this product, any part that appears damaged should be carefully
checked to determine that it will operate properly.Any part that is damaged
should be properly repaired or replaced by a qualified technician.
Note:Performance of this product may vary depending on variations in vehicle bat-
tery power.
Warning:The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
Unpacking
When unpacking, check to make sure the following parts are included.If any parts
are missing or broken, please call Harbor FreightTools at the number on the cover
of this manual.
Cup
Beverage
Container
Dispenser
Valve Cap
Handle
Carrying Strap
Fused Plug
12 VDC Power Cord
SKU 92049 Page 4
Operation
1. Before you begin using unscrew the Cup and DispenserValve Cap and wash
theinterior of thecontainer with mild soapand warm water.Washthe Cup.
Rinsewell. Refer to the photos on the previous page.
Caution: Do not place unit in a bath of water.This may damage the electrical
components of the unit.
2. Fill the Beverage Holder with the desired drink or liquid food.
3. Screw in (clockwise) the DispenserValve Cap.
4. Plug one end of the Power Cord into the bottom of the Beverage Container
and the Fused Plug into a 12VDC vehicle power socket.
This will heat up the contents and keep it warm.When the Power Cord is
unplugged, the contents will keep warm for a period of time.
Note: If the stored drink is to be kept cool, do not plug in the Power Cord.
5. To pour a drink from the Beverage Holder, press in on the DispenserValve
Cap until it locks in the down position, then pour.
If the contents are of a thick consistency
(such as soup), unscrew the Dispenser
Valve Cap and pour out the contents.
6. Replace the DispenserValve Cap and
press in on the cap button to lock.
7. Wash container after each use.
8. Store unit with Power Cord in the factory
box when not in use.
Maintenance / Cleaning
1. This product has no replaceable parts.
2. After each use, place warm water and mild soap inside the Beverage Holder
to clean.Do not submerge unit into water.
3. If the unit does not warm up, the 10A fuse in the Fused Plug may need
replacement.Unscrew the plug cap to view and replace fuse.If the fuse is
good, the unit is not receiving power, or it is defective and needs servicing by
a qualified technician.
Tabla de contenidos
Otros manuales de Electrodoméstico de cocina de Harbor Freight Tools
Harbor Freight Tools
Harbor Freight Tools 41420 Guía de referencia rápida
Harbor Freight Tools
Harbor Freight Tools 63146 Instrucciones de montaje
Harbor Freight Tools
Harbor Freight Tools 66906 Manual de lista de piezas
Harbor Freight Tools
Harbor Freight Tools 98412 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 42787 Manual de instalación
Harbor Freight Tools
Harbor Freight Tools 99871 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 66928 Manual de lista de piezas
Harbor Freight Tools
Harbor Freight Tools 44934 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 91611 Manual de usuario
Harbor Freight Tools
Harbor Freight Tools 93001 Manual de usuario
