Harbinger MDA350 Manual de usuario
M350
2.1 Portable Pa SyStem
PORTABLE
PA
SERIES
MuV
¨
TABLE OF CONTENTS
SAFETY INSTRUCTIONS ........................................... 3 – 4
FEATURES .................................................................... 5
SYSTEM MAINTENANCE........................................... 5 – 6
SYSTEM CONFIGURATIONS ..................................... 7 – 8
WHAT’S IN THE BOXES ................................................. 9
SETTING UP THE SYSTEM.............................................. 10
PANEL CONTROLS................................................ 11 – 13
TROUBLESHOOTING ................................................... 13
SPECIFICATIONS ......................................................... 14
BLOCK DIAGRAM........................................................ 15
WARRANTY .................................................... Back Cover
FCC STATEMENT .............................................. Back Cover
M350
2.1 PORTABLE PA SYTEM
3
M350 Owner's Manual
Please keep this instruction manual for future reference and for the duration
of owning the M350 Portable PA System. Please carefully read and
understand the instructions inside this owner’s manual before attempting to
operate your new electronic drum monitor system.
This instruction manual includes essential safety information regarding the
use and maintenance of the amplifier. Take special care to heed all warning
symbols and signs inside this manual and those printed on the amplifier on
the back of the loudspeaker.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE AMPLIFIER
TO WATER/MOISTURE, NOR SHOULD YOU OPERATE THE AMPLIFIER
NEAR ANY WATER SOURCE.
The exclamation point triangular symbol is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the user manual accompanying the Amplifier.
The lightning flash with an arrow triangular symbol is intended to alert
the user to the presence of non-insulated “dangerous voltage” within the
product’s enclosure, and may be of sufficient magnitude to constitute a risk
of electric shock.
WARNING
Handle the power supply cord with care.
Do not damage or deform it as it may cause electric shock or malfunction
when used. Hold the plug attachment when removing from wall outlet. Do
not pull on the power cord.
IMPORTANT SAFETY PRECAUTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. DO NOT turn on the amplifier module before
connecting all other external devices.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provide
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachment/accessories specified by the manufacturer.
12.Use only the cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. POWER SOURCES – This product should be operated only from the
type of power source indicated on the rating label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company.
16. Where the mains plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
17. OBJECT AND LIQUID ENTRY – Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through openings.
18. Water and Moisture: This product should be kept away from direct
contact with liquids. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
19. Keep the speaker system out of extended or intense direct sun light.
20. No containers filled with any type of liquid should be placed on or near
the speaker system.
21. SERVICING – The user should not attempt any service to the speaker
and/or amplifier beyond that described in the operating instructions.
All other servicing should be referred to qualified service personnel.
22. VENTILATION – Slots and openings in the amplifier are provided for
ventilation and to ensure reliable operation of the product and to protect
it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-
in installation such as a bookcase or rack.
23. Protective earthing terminal: The apparatus should be connected to a
main socket outlet with a protective earthing connection.
24. ACCESSORIES – Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to a
child or adult, and serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the product.
25. When moving or not using the appliance, secure the power cord
(e.g., wrap it with a cable tie). Be careful not to damage the power cord.
Before using it again, make sure the power cord has not been damaged.
If the power cord has been damaged at all, bring the unit and cord to a
qualified service technician for repair or replacement as specified by the
manufacturer.
SAFETY INSTRUCTIONS
H
A
V
E
Q
U
E
S
T
I
O
N
S
?
888-286-1809
OR VISIT OUR WEBSITE AT: HARBINGERPROAUDIO.COM
4M350 Owner's Manual
SERIES
MuV
¨
WARNING: To reduce the risk of fire or shock do
not expose this equipment to rain or moisture.
AVERTISEEMENT: Pour réduire les risques
d’incendie et d’électrocution, ne pas exposer ce
matérial à la pluie ou à l’humidité.
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
CAUTION: To reduce the risk of electric shock, do not
remove chassis. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
AVERTISEEMENT: Pour réduire les risques d’incendie et
d’électrocution, ne pas exposer ce matérial à la pluie ou
à l’humidité.
WARNING: To reduce the risk of fire or shock do
not expose this equipment to rain or moisture.
AVERTISEEMENT: Pour réduire les risques
d’incendie et d’électrocution, ne pas exposer ce
matérial à la pluie ou à l’humidité.
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
CAUTION: To reduce the risk of electric shock, do not
remove chassis. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
AVERTISEEMENT: Pour réduire les risques d’incendie et
d’électrocution, ne pas exposer ce matérial à la pluie ou
à l’humidité.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE UNIT.
WARNING: To reduce the risk of fire or shock do
not expose this equipment to rain or moisture.
AVERTISEEMENT: Pour réduire les risques
d’incendie et d’électrocution, ne pas exposer ce
matérial à la pluie ou à l’humidité.
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC
ELECTRIQUE NE
PAS OUVRIR
CAUTION: To reduce the risk of electric shock, do not
remove chassis. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
AVERTISEEMENT: Pour réduire les risques d’incendie et
d’électrocution, ne pas exposer ce matérial à la pluie ou
à l’humidité.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED
ON THE APPARATUS.
CAUTION - To prevent electric shock hazard, do not connect to mains power
supply while grille is removed.
CAUTION - To prevent electric shock hazard, replace grille.
26. LIGHTNING – For added protection during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product due to lightning and
power-line surges.
27. REPLACEMENT PARTS – When replacement parts are required,
be sure the service technician has used replacement parts specified by
the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
To prevent electric shock, do not use a polarized plug with an extension
cord, receptacle or other outlet unless the blades can be fully inserted to
prevent blade exposure.
M350
2.1 PORTABLE PA SYTEM
5
M350 Owner's Manual
CONGRATULATIONS!
FEATURES
…on your purchase of a Harbinger M350 Electronic Drum Monitor System. By following these guidelines and suggestions, your new amplifier
will provide you with many years of great sound and reliable service.
• 350 Watts RMS (1100 watts peak); Class-D power
• 10” Subwoofer and two 4” satellite speakers
• 3-channel mixer with various inputs for multiple sound sources
• 2-band shelving EQ provides complete tone control
• Subwoofer level knob to mix proper low frequency content
• Aux input and Bluetooth® audio
• Weighs only 60 pounds for easy transport
• Includes stands and stand-transport bags
SYSTEM MAINTENANCE
LOCATION
• To avoid deformation, discoloration, or more serious damage, do not expose the unit to direct sunlight, high temperature sources,
or excessive humidity
POWER SUPPLY
• Turn the power switch off when the M350 is not in use.
• The AC cable should be unplugged from the AC outlet if the M350 will not be used for an extended period
• Avoid plugging the AC adapter into an AC outlet that is also powering high-consumption appliances such as electric heaters or televisions
• To avoid damage, turn off the M350 power switch and all related devices prior to connecting or disconnecting cables
HANDLING AND TRANSPORT
• Never apply excessive force to any parts
• Unplug cables by gripping the plugs firmly
• Do not pull on cables
• Physical shocks caused by dropping or bumping can result in serious damage to the unit
6M350 Owner's Manual
SERIES
MuV
¨
CLEANING
• Clean with a dry, soft cloth
• A slightly damp cloth may be used to remove stubborn grime and dirt. Never use cleaners such as alcohol or thinner
• The M350 contains electronic circuitry that may cause interference if placed too close to radio or television receivers. If this occurs, move
the M350 further away from the affected equipment
SERVICE AND MODIFICATION
• There are no user serviceable parts in the M350
• Do not attempt to open the M350 or make any change to circuits or parts. This will void the warranty
PROTECTIVE CIRCUIT (POLY SWITCH)
The M350 is fitted with a self-resetting poly switch that protects the high-frequency driver from damage caused by excessive power. If a
loudspeaker cabinet loses high-frequency output, immediately remove power from the unit and wait for two to three minutes. This should be
long enough to allow the poly switch to reset. Reapply power and check the performance of the high frequency driver before continuing, with
the power reduced to a level that does not cause the poly switch to interrupt the signal.
INTERFERENCE FROM CELL PHONE
Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system.
M350
2.1 PORTABLE PA SYTEM
7
M350 Owner's Manual
SYSTEM CONFIGURATIONS
The M350 Portable PA System can be set up for optimal sound in any studio, stage or practice room.
2.1 STEREO SETUP
Place the subwoofer/amp module in the center of your setup. Place the two satellite speakers on their respective tripods and position them
equidistant from the subwoofer for realistic spatial realism. Attach the speaker cables.
8M350 Owner's Manual
SERIES
MuV
¨
COMPACT MONO SETUP
When space is at a premium, use this compact, cable-less method.
Place the subwoofer/amp module on a table or the floor. Place the
satellite speakers directly on top, making sure to slide the speakers
into their power/audio contacts.
STANDARD MONO SETUP
This method is similar to the compact method, but allows the speakers
to sit above the audience, dance floor or other speakers. Place the
subwoofer/module on the floor, then insert one of the speaker poles
(taken from one of the speaker tripods) and insert it into the mounting
hole. Place one satellite speaker onto the pole, and slide the other
satellite speaker on top. This method only uses a single cable.
M350
2.1 PORTABLE PA SYTEM
9
M350 Owner's Manual
WHAT’S IN THE BOXES
The Main Sub Speaker/Amp/Mixer Speaker Cables AC Cable
Speaker Stands
Speaker Mounts And Satellite Speakers
BOX #1
BOX #2
Carrying Case
(For The Stands And Mount)
10 M350 Owner's Manual
SERIES
MuV
¨
SETTING UP THE SYSTEM
1. You will need to place the flat sections with the pole receptacle
onto the top of the speaker pole.
2. Extend the speaker stand legs and place each stand on either side
of your performance area.
3. Once the stands are set up slide the small speakers onto the
speaker stands.
4. Connect the included 1/4” to 1/4” speaker cables to the speaker
outputs on the bottom section of the sub speaker/mixer cabinet.
5. Plug the audio sources (microphone, mixer, mp3 player, etc) input
channels on the mixer.
6. Plug the power cable into the AC jack on your sub speaker/ mixer
cabinet and plug the other end of the cable into your power mains.
7. Turn on the power of the sub speaker/mixer. Slowly increase the
level on the channel you’ve connected.
8. Turn the sub knob up to the desired level to set the low frequency
response for the entire system.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de altavoces de Harbinger
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario