HanRongDa HRD-787 Manual de instrucciones

High Performance Multi Band Radio

Bluetooth TF Card Player · APP Intelligent Remote Control

Flashlight ·SOS Alarm

Operational Guideline

(Model: HRD-787)

Thank you for your purchasing our product. Please read this operation guide carefully and keep it properly before using it.

1: An Overview of the Product

Our products which are constantly innovated can meet various demands of the majority of users. This has been our company’s

tenet for researching and developing new products.

HRD-787 is a product carefully made by our company. It is a DSP digital display full band radio that can support APP intelligent

remote control.

It can receive FM, medium wave, short wave, VHF VHF (VHF-NFM&VHF-WFM), North America national weather band

multi-band broadcast and can support Bluetooth, TF card multimedia music playback with high fidelity sound quality.

It supports flashlight lighting and SOS alarm emergency functions and is an emergency product that can be used both at home and

outdoors.

2: A Brief Description of Product Functions:

Different from the traditional radio, this product has a radio with APP intelligent remote control (it can support Android and

Hongmeng mobile phone software).

Within a range of less than 20 meters, the band switching and mode switching of the intelligent near-distance remote control radio

can be realized. With such functions as digital key point frequency, sound control, frequency selection, radio recording, locking, the

product can give users new use experience.

Our product designs six kinds of backlight colors which can provide users with different visual experience:

FM&VHF mode backlight: green

AM mode backlight: purple

SW mode backlight:yellow

WB mode backlight:red

Backlight for Bluetooth receiving mode: gentle blue

TF card playing backlight: light blue

Our product uses software programming to realize such functions as reception of FM, medium wave, short wave, VHF

(VHF-NFM, VHF-WFM) and all-band radio broadcast in North American weather bands. It has strong reception sensitivity.

Our product, with the aid of high-tech audio technology, can connect Bluetooth wirelessly for music transmission and play. It can

play 256G mp3/wma/wav TF format to the maximum.

Our product TYPE-C jack is a dual jack: it can be charged and the data line is used to connect our product with the computer. Then,

the product is used a as a sound source input speaker.

Under radio mode, our product supports automatic search & automatic radio as well as manual station saving.

10 meter waves are designed which can quickly search for the desired frequency point.

FM/ medium wave settings have five options. There is no national boundary and all world countries can use that.

1): FM: 87.5-108MHZ/ AM: 522-1710KHZ (step value: 9KHZ)

2): FM: 87-108MHZ/ AM: 520-1710KHZ (step value: 10KHZ)

3): FM: 76-108MHZ/ AM: 522-1710KHZ (step value: 9KHZ)

4): FM: 64-108MHZ/ AM: 522-1710KHZ (step value: 9KHZ)

Under music playing mode, our product is equipped with the music spectrum “ ”, which can bring you

beautiful music melody.

Our product has both BASS low sound quality and headphones. Therefore, it can meet demands of the majority of users.

Under TF card playing mode, our product can provide four types of playing:

rA (repeat all), rO: (repeat one), rF (repeat file), rr: (random)

Our product uses the polymer lithium battery which has a long battery life.

Our product can be locked,can be mute

Our product adopts 1.26-inch super-large display screen which can display a variety of contents: including the time, the power

indicator, the signal indicator, the sleep time and the alarm clock symbol.

24-hour system/12-hour system can be selected.

The sleep shutdown time, can set to be 90-80-70-60-50-40-30-20-10 minutes.

Timing startup and timing alarm clock can be set.

After selecting timing startup, users can set the shutdown time after timing startup to be 10-20-30-40-50-60-70-80-90 minutes

&FULL (it will automatically power off after startup is canceled)

Our product is equipped with backlight display. Therefore, users can use it in the dark.

Our product can remember 396 stations in radio mode (FM/VHF/medium wave/short wave: 99 each).

Under Bluetooth and TF card music playback mode, our product can play six kinds of EQ sounds:

E1: NORMAL, E2: POP, E3: ROCK, E4: JAZZ,

E5: CLASSIC, E6: COUNTRY

Our product uses type-c charging jack so that users can use it safely.

3: Items inside package

Name of items

Quantity

HRD-787 high performance all band radio

Straps

polymer lithium battery (Built-in machine)

USB TYPE-C Data & charging cable

Operational guideline

Storage bag

Packing box

4: Schematic diagram for downloading mobile APP (see APP installation instructions in the

attachment):

Step 1: turn on the radio Step 2: Install the APP. Step 3: successful installation on the mobile desktop Step 4. Click it to enter APP

mode

“RADIO-C” Click it for connection

5: Schematic diagram of appearance button functions

Front view of product Rear view

Left view Right view

Top view

5.1 Functions of all buttons:

1: Power on/off the machine [Refer to 7.1.1 for details].

2: Set 90 minutes’ sleep mode [Refer to 7.1.2 for details]

3: Working Mode: light press it to switch pause/play.

1: Under clock display state: Set receiving frequency range [Refer to 7.4 for details].

2: Under starting-up status: Select working mode switch [Refer to 7.2 for details]

3: Fully automatic station search and storage [Refer to 7.4.1.3 for details]

1: radio mode: light press it to enter fetch mode & long press it for 2 seconds to manually save stations.

2: Music playback working mode: light press it to select EQ sound.

3: Turn on and off VHF; switch NFM/WFM mode and select WFM [refer to 7:6 for details]

1: power-on status: volume adjustment+

2: Clock status: long press it to enable runtime setting/12-hour system&24-hour system

1: power-on status: volume adjustment-

2: Clock status: long press it to set the timed alarm clock/timed startup & timed shutdown will be set after it

is started.

3: Alarm clock state: light press it to close the alarm clock; Clock status: light press it to cancel the alarm

clock.

1: Power-on/Power-off state: lock & Unlock

2: Open or close “SOS” alarm functions [refer to 13.4/13.5 for details]

3: Short wave working mode: Enable the fast meter wave to select stations.

4: Select TF card play mode [refer to 9 points for details ]

1: clock/alarm clock is set: adjust the time +;

2: Radio mode: light press it to increase frequency;

long press it for two seconds to automatically search for stations

enter the station fetch/storage mode: light press it to get the station fetch/storage address number +

3: TF card playing mode: light press it to play the next song; long press it to play quickly;

4:Bluetooth mode: light press it to go to the next song.

1: Clock/ alarm clock setting: adjust the time -;

2: Radio mode: light press it to decrease frequency;

long press it for two seconds to automatically search for stations

enter the station fetch/storage mode: light press it to get the station fetch/storage address number-.

3: TF card playing mode: light press it to return to the previous song; long press it to rewind playback;

4: Bluetooth mode: light press it to return to the previous song.

1: Double click it (press it twice continuously) to start the flashlight; light press it to turn off the light.

2: When the SOS alarm lock is on, long press it for two seconds to start "SOS" alarm + flashing light.

Light press it to turn off the light and alarm.

TF card jack socket

3.5MM headphone audio output jack.

TYPE-C

USB jack

1: Charging hole;

2: Computer audio input jack.

6: Description of LCD Symbols

Radio playing: signal indication; music playback mode: music

spectrum display symbol

Station storage address number& station fetch address number &EQ

display symbol

VOLUME

Volume

Automatic search and storage of stations & manual station storage &

station fetch display symbol

Power & Charging

Charging

Unit

Start auto start-up & alarm clock

Sleep time

Lock symbol

Bluetooth playback

TF card play

North American national weather band has activated the warning

indication.

FM: Frequency modulation receiving mode;

VHF: VHF receiving mode

AM: medium wave receiving mode；

SW: short wave mode；

WB: National weather band of NorthAmerican

Bluetooth&TF card Play mode: Enable pause/play

Ante meridiem of 12-hour system

post meridiem of 12-hour system

Standby time: Display the time.

Bluetooth mode: Display Bluetooth status

TF card working status: Display the total number of songs & display

the playing time

7: Introduction to functions:

7.1.1: Power on/off: light press and the clock will be displayed; light press [ ] within 10 seconds and the machine will be

turned on.

When the machine is on, long press [ ] for two seconds to close the machine. Clock status will be displayed when the

machine is turn off.

[Note: After power-off, the radio will enter power saving mode (backlight will be off after 5 seconds and the display will be off after 10

seconds). If you need to check the time, press [ ].

7.1.2 Set sleep time: light press [ ] to start clock; long press [ ] for two seconds to set sleeping mode;

90.80.70.60.50.40.30.20.10 minute 。When sleep time is displayed, light press [ ] to choose automatic sleep

shutdown minutes as 90.80.70.60.50.40.30.20.10 minutes.

After select auto sleep shutdown mode, LCD displays .

7.2: BAND: selection of working mode

The product supports eight working modes which are shown below:

Working state, light press 【BAND】key to switch the above several working modes.

7.3: Volume adjustment: (Volume can be adjusted between 00 and 30)

In the working state, light press [VOL+&VOL-] to adjusts the volume, which can be adjusted between "00-30" volume level as

required.

7.4: Receive RADIO:

The machine can receive FM/VHF/AM/SW/WB and the specific receiving range is as follows:

Different countries have different requirements for FM reception and medium wave reception. The following options are specially

designed.

The factory default value is the first one

FM Mode

VHF Mode

AM Mode

SW Mode

WB Mode

87.5-108MHZ

30.00-199.975MHZ

522-1710KHZ (9KHZ)

4.750-21.850MHZ

162.400-162.550MHZ

87-108MHZ

30.00-199.975MHZ

520-1710KHZ (10KHZ)

4.750-21.850MHZ

162.400-162.550MHZ

76-108MHZ

30.00-199.975MHZ

522-1710KHZ (9KHZ)

4.750-21.850MHZ

162.400-162.550MHZ

:64-108MHZ

30.00-199.975MHZ

522-1710KHZ (9KHZ)

4.750-21.850MHZ

162.400-162.550MHZ

Users can adjust the above reception modes according to demands and the operation procedures are as follows:

Under time display mode, long press "BAND" for 2 seconds to display FM low frequency point of the current mode (87.5MHZ); light

press [ ] to select the frequency range you want. Stop the operation to exit the setting and the machine will automatically default

to the last selected frequency setting value.

(LCD’ displaying 87 means that the second receiving mode is used; LCD’s displaying 76 means that the third receiving mode is used;

LCD’s displaying 64 means that the fourth receiving mode is used.)

7.4.1: Station searching mode: Manual station adjustment; semi-automatic station search; full-automatic station search and storage

7.4.1.1: Manual station adjustment: light press[ ]and the station will increase and decrease according to the minimum

wave band.

Minimum FM&VHF step value: 0.1MHZ

Minimum step value of AM medium wave: 9KHZ / 10KHZ

Minimum step value of SW short wave: 0.005MHZ

7.4.1.2: Semi-automatic station search: long press for 2 seconds and each band quickly searches radio by the minimum

step value. It will then stop and play as long as stations with signals are found.

7.4.1.3: Full-automatic station search and storage: Under radio mode, long press [BAND] for two seconds to enter the

full-automatic station search and storage. Stations will be automatically stored. It will be searched from the lowest frequency

point of the current received band to the highest frequency point.

During the automatic scanning and search process, the symbol "PRESET 01-PRESET **" on the right corner of the LCD will

be displayed (the number stands for the preset address number).

After a round of search is finished, it automatically stops and plays the first frequency point program saved.

Number of stations stored for each band: 99; total number of storage stations: 396 (except WB North America National

Weather Band)

Warm tip: The number of stations stored depends on the local signal strength.

7.5: Metre wave of short wave:

Short wave reception range: 4.750-21.850MHZ.

In order to select the short wave station more quickly, 10 meter waves are set under SW working mode of short wave. Light

press [ ]and LCD will display

4.750MHZ, 5.600MHZ, 7.350MHZ, 9.900MHZ, 12.100MHZ, 13.870MHZ, 15.800MHZ,

17.900MHZ, 19.100MHZ and 21.850MHZ.

7:6: About VHF

Civil VHF band (civil VHF band). This machine can receive VHF (NFM/WFM dual demodulation mode)

7.6.1:About VHF band:

VHF-NFM (The delivered bandwidth value of our product is 5KHZ):

This band can receive train channel/racing channel /VHF intercom receiver /VHF(HAM) and can be used by some people in need.

(The above data are for reference only. Different countries have different situations. They shall be based on radio frequency

division of local areas.)

7.6.2: VHF-WFM: Four bandwidth settings are available: 50KHZ/100KHZ/150KHZ/200KHZ

They improve the playability and usability of the product.

7.6.3: The default VHF receiving mode of our product is VHF-NFM.

7.6.4: VHF band users can choose to turn it off or on according to their needs. The operations are shown as below:

7.7: Manual station storage method:

In the radio receiving mode, you can find target frequency points by the three methods mentioned above 7.4.1. Long press [MODE]

for two seconds to enter the station saving mode and the LCD will display that “PRESET **” flashes. At this time, light press

[ ] to select the station storage address number. Press [MODE] to confirm it again. The station storage storage number will

stop flashing and finally be off to complete the manual station storage operation.

Note: If the target frequency points are selected, please long press [MODE] for two seconds to start storing the station. Light press

[MODE] to confirm that the station has been saved. Store stations upwards directly in the order of station deposit number in this way,

7.8: Fetch stations

Store the stations according to [7.4.1.3 automatic station search or storage] or [7.7 manual station storage].

Light press [MODE] to pick up the station. When [PRESET **] is displayed, light press [ ] to select the station number.

Each time you press [ ], a station will be changed and the following content “PRESET00-PRESET **”(01-** is the station

pickup number) will be displayed.

Note: “PRESET -- ”indicates that there is no stored station

7.9: North American WB Weather Band:

Light press “BAND” to switch to WB weather band. Light press or long press to select the received weather frequency

points.

Frequency points received are as follows:

1－162.400MHZ, 2－162.425MHZ, 3－162.450MHZ: 4－162.475MHZ,

5－162.500MHZ, 6－162.525MHZ, 7－162.550MHZ,

Long press “BAND” for 2 seconds to enter the automatic warning "ALERT". In the automatic warning "ALERT" state, long press

"BAND" for 2 seconds to exit the automatic warning "ALERT" function. (Note: Under the automatic warning mode, no effect will

appear when you press buttons. You need to long press “BAND” to disable the automatic warning mode before other radio functions

can be used).

8: Bluetooth mode:

Bluetooth name of our product: “HRD-787”

Under the startup working state, light press “BAND” to switch to “BT" mode and Bluetooth“ ” will flash, indicating that it is

waiting to be connected to Bluetooth. After it is successfully connected, Bluetooth“ ” will always be displayed.

You can control related operations, such as volume, last song, next song and so on, by operating your mobile phone or this device.

Light press “ ” to switch Bluetooth music playback/pause.

9: TF card playing:

Power-on state, light press [BAND] to switches to TF card mode to play songs

Please insert TF card correctly according to the direction indicated by the icon: gently press into the card and gently press out

again.

Light press [ ] to play the next song. Light press [ ] to go back to the previous song.

Long press [ ]for fast forward and long press [ ] for fast backward.

Light press [ ] switch music playback/pause.

Under TF card playing mode, you can select playing mode according to the following operations:

Light press [ ] and the upper right corner of LCD will display rA, rO, rF or rr, which represents the following

functions:

rA (repeat all), rO: (repeat one), rF (repeat file), rr: (random)

TF card supports a maximum capacity of 256 GB.

Tabla de contenidos

Otros manuales de Radio de HanRongDa

HanRongDa

HanRongDa HRD-747 Manual de instrucciones

HanRongDa

HanRongDa HRD-900 Manual de usuario

HanRongDa

HanRongDa K-603 Manual de usuario

Manuales populares de Radio de otras marcas

EisSound

EisSound KBSound iSelect Manual de usuario

Midland

Midland 1001LWX Manual de usuario

Konig

Konig HAV-SR41 Manual de usuario

Roberts

Roberts exprssion Manual de usuario

VDigi

VDigi DD3.0 Manual de usuario

Radio Shack

Radio Shack 21-1863 Manual de usuario

Roberts

Roberts Stream 207 Manual de usuario

Sony

Sony Walkman SRF-M97 Manual de usuario

Stanley

Stanley FatMax FMC770 Manual de usuario

auna

auna DAB-Radio 10026947 Manual de usuario

SOUNDMASTER

SOUNDMASTER UR190 Manual de usuario

HYT

HYT TC-320 Manual de usuario

auna multimedia

auna multimedia Yellowstone 10026851 Manual de usuario

B-Tech

B-Tech GMRS-V2 Manual de usuario

Weierwei

Weierwei VEV-V8 Manual de usuario

SOUNDMASTER

SOUNDMASTER DAB750 Manual de usuario

Telefunken

Telefunken TF-1505 Manual de usuario

Makita

Makita LXRM03 Manual de usuario