HANNspree HE225HPB Manual de usuario

User’s Manual OSD[V6.1]

HE225HPB (HSG1283+)

LCD Monitor

OSD[V6.0]

User’s Manual

Before operating the monitor, please read this manual thoroughly. This manual should be retained for

future reference.

This device complies with requirement of EMC directive 2014/30/EU with regard to

Electromagnetic Compatibility, and 2014/35/EU and 93/68/EEC with regard to Low Voltage

directive.

【Optional, depend on selected model】

Socket-outlet shall be near the equipment and shall be accessible.

Trademark Notice:

HANNspree products incorporate High-Definition Multimedia Interface

(HDMI TM) technology.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other

countries.

User’s Manual

RECYCLING INFORMATION

We, the HANNspree care very much about our environment protection strategy and firmly believe

that it helps us have healthier earth via appropriate treatment and recycling of industrial technology

devices at the end-of-life.

These devices contain recyclable materials, which can be re-decomposed and re-integrated into

brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned

substances. We strongly encourage you to contact the provided information to recycle this product.

For more information, please visit

http://www.hannspree.eu/

User’s Manual

TABLE OF CONTENTS

SAFETY NOTICE.................................................................................................... 5

PRECAUTIONS.................................................................................................. 5

SPECIAL NOTES ON LCD MONITORS........................................................6

BEFORE YOU OPERATE THE MONITOR....................................................... 7

FEATURES...........................................................................................................7

CHECKING THE CONTENTS OF THE PACKAGE....................................7

INSTALLATION INSTRUCTIONS................................................................. 8

POWER.................................................................................................................8

MAKING CONNECTIONS............................................................................. 10

ADJUSTING THE VIEWING ANGLE.......................................................... 11

OPERATING INSTRUCTIONS...........................................................................12

GENERAL INSTRUCTIONS.......................................................................... 12

FRONT PANEL CONTROL............................................................................ 13

HOW TO ADJUST A SETTINGS....................................................................15

PLUG AND PLAY............................................................................................. 18

TECHNICAL SUPPORT (FAQ)........................................................................... 19

Q & A FOR GENERAL PROBLEMS.............................................................19

ERROR MESSAGE & POSSIBLE SOLUTIONS........................................ 21

APPENDIX.............................................................................................................. 23

SPECIFICATIONS............................................................................................23

User’s Manual

SAFETY NOTICE

1. The changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the

emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modification to this equipment. It is the responsibilities of the user to correct such interference.

4. Only use attachments/accesories specified by the manufacturer.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high

voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified

personnel only.

PRECAUTIONS

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,

swimming pool or in a wet basement.

Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a

person and cause serious damage to the appliance. Use only a cart or stand recommended by the

manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a

mounting kit approved by the manufacturer and follow the kit instructions.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure

reliable operation of the monitor and to protect it from overheating, be sure these openings are not

blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place

the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or

cabinet unless proper ventilation is provided.

The monitor should be operated only from the type of power source indicated on the label. If you

are not sure of the type of power supplied to your home, consult your dealer or local power

company.

Unplug the unit during a lighting storm or when it will not be used for long period of time. This

will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a

fire or electric shock. Never spill liquids on the monitor.

Do not attempt to service the monitor by yourself; opening or removing covers can expose you to

dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.

The wall socket shall be installed near the equipment and shall be easily accessible.

User’s Manual

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the

Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or

less such as a missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after

switching the image, when the same image is displayed for hours. In this case, the screen is

recovered slowly by changing the image or turning off the Power Switch for hours.

If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or

service center for repair. Do not attempt to repair the monitor yourself.

User’s Manual

BEFORE YOU OPERATE THE MONITOR

FEATURES

54,6cm / 21.5” Wide Screen TFT Color LCD Monitor

Crisp, Clear Display for Windows

GP Green Product

Ergonomic Design

Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

Cables and User manual

Power Cord

Warranty Card

Quick Start Guide

EUR Energy Label

HDMI Cable

Screws

Screwdriver

User’s Manual

INSTALLATION INSTRUCTIONS

INSTALL

REMOVE

Figure.1. Installing and Removing the Base

INSTALLATION:

1. Install the Arm on Monitor with 3 screws.

2. Align the monitor with the opening in the base.

3. Rotate the stand base 25°clockwise, A clear click sound will affirm that the base is connected

correctly.

REMOVAL:

1. Gently pull up base card buckle, Rotate the stand base 25°counterclockwise.

2. Gently pull the base from the monitor until they are unattached.

3. Remove the screws so that the stand base can be removed, then gently remove the stand base.

Warm prompt: Place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to

Monitor while install and remove.

POWER

POWER SOURCE:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an Internal universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to

wall-outlet.

User’s Manual

SETTING THE MONITOR ON THE WALL

DISSEMBLING THE STAND BASE:

1. Disconnect all the cables and cords from the Monitor to prevent breakage.

2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to

prevent any damage to the Monitor.

3. Squeeze the sides to release the retaining plastic tabs and pull the stand cover off.

4. Remove the screws so that the stand base can be removed.

5. Gently remove the stand base.

(For reference only)

WALL MOUNTING THE MONITOR:

1. Purchase a VESA compatible wall bracket:

VESA 100×100, 4 holes, M4, 8mm, 8kg.

2. Locate your ideal Monitor position on the wall.

3. Fix the wall bracket firmly on the wall.

4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.

Note:

Please read the instructions of your specific wall bracket to properly wall mount the Monitor.

The pitch of the mounting holes is 100mm horizontally and 100mm vertically.

The screws type required is metric: M4, 8mm length.

The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of

the stand base.

For use only with UL listed wall mount bracket.

*Installing the LCD Monitor requires special skill that should only be performed by qualified service

personnel. Customers should not attempt to do the work themselves. HANNspree bears no

responsibility for improper mounting or mounting that results in accident or injury. You can ask a

qualified service personnel about using an optional bracket to mount the Monitor to the wall.

User’s Manual

MAKING CONNECTIONS

CONNECTING TO A PC

Turn off your computer before performing the procedure below.

1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the

computer’s VGA port.

2. Connect one end of the HDMI cable (optional) to the back of the monitor and connect the other

end to the computer’s HDMI port.

3. Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to

Wall outlet.

5. Turn on your monitor and computer.

Figure.2. Connecting to a PC

LINE OUT

LINE IN

VGA Input

HDMI Input (optional)

Power AC Input

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de HANNspree

HANNspree

HANNspree HC241HPB Manual de usuario

HANNspree

HANNspree HO165HTB Manual de usuario

HANNspree

HANNspree HANNS-G HL247HGB Manual de usuario

HANNspree

HANNspree HANNS G HE196APB Manual de usuario

HANNspree

HANNspree HO101HTB Manual de usuario

HANNspree

HANNspree HL320UPB Manual de usuario

HANNspree

HANNspree HO325PTB Manual de usuario

HANNspree

HANNspree HO105HTB Manual de usuario

HANNspree

HANNspree HG191 Manual de usuario

HANNspree

HANNspree HT248PPB Manual de usuario

HANNspree

HANNspree SL231DPB Manual de usuario

HANNspree

HANNspree HF225DPB Manual de usuario

HANNspree

HANNspree HL162CPB Manual de usuario

HANNspree

HANNspree HC221HPB Manual de usuario

HANNspree

HANNspree Hanns.G HL274 Manual de usuario

HANNspree

HANNspree Hanns.G HT225HPA Manual de usuario

HANNspree

HANNspree HS329PQB Manual de usuario

HANNspree

HANNspree HC284UPB Manual de usuario

HANNspree

HANNspree Hanns-G HP194DJB Manual de usuario

HANNspree

HANNspree HF225DPB Manual de usuario

HANNspree

HANNspree HS279PSB Manual de usuario

HANNspree

HANNspree HF237 Manual de usuario

HANNspree

HANNspree HL326UPB Manual de usuario

HANNspree

HANNspree HS248PPB Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación