Hanlong Unicorn 3112 Manual de usuario

User Manual

Unicorn 3112

Analog Telephone Adaptor

Hanlong Technology Co., Ltd

http://www.hanlongtek.com

Table of Content

Unicorn 3112 User Manual

1. WELCOME...................................................................................................................3

2. WHAT IS IN THE PACKAGE.......................................................................................3

3. PRODUCT OVERVIEW ...............................................................................................3

3.1. Key Features..................................................................................................3

3.2. Hardware specification...................................................................................4

4. INSTALLATIONS .........................................................................................................5

4.1. Safety.............................................................................................................6

5. BASIC OPERATIONS..................................................................................................6

5.1. Get Familiar with Voice..................................................................................6

5.2. Make Phone call.............................................................................................8

5.2.1. Calling Phone or Extension Numbers ....................................................8

5.2.2. Call Hold .................................................................................................8

5.2.3. Call Waiting.............................................................................................8

5.2.4. 3-way Conferencing................................................................................9

Star Code Style 3-way Conference.......................................................................9

Bellcore Style 3-way Conference..........................................................................9

5.2.5. Direct IP-to-IP Calls................................................................................9

5.2.6. Blind Transfer........................................................................................10

5.2.7. Attended Transfer .................................................................................11

5.2.8. Send and Receive PSTN Calls.............................................................11

5.2.9. VoIP-to-PSTN Calls..............................................................................11

5.2.10. PSTN-to-VoIP Calls..............................................................................11

5.2.11. Route Calls to PSTN.............................................................................12

5.3. Call Features................................................................................................12

5.3.1. Call Features Tables.............................................................................12

5.3.2. PSTN Pass Through.............................................................................13

5.4. FAX...............................................................................................................13

5.5. Status Light Indicator ...................................................................................13

6. CONFIGURATION GUIDE.........................................................................................14

6.1. Configuring Unicorn 3112 using Web Browser (Recommended)................14

6.1.1. Accessing the Web Configuration ........................................................15

6.1.2. Programming Unicorn 3112 via the LAN Port ......................................15

6.1.3. Programming Unicorn 3112 via the WAN Port.....................................15

6.1.4. User Programming and Configuration..................................................16

6.1.5. Passwords ............................................................................................16

6.1.6. End User Settings:................................................................................17

6.1.6.1 Device Status: ...............................................................................17

6.1.6.2 Basic Options:...............................................................................18

6.1.6.3 Super Option.................................................................................21

6.1.6.4 FXS Port Settings:.........................................................................24

6.1.6.5 FXO Port Settings: ........................................................................33

6.1.7. Saving the Configuration Changes.......................................................39

6.1.8. Rebooting the Unicorn 3112 .................................................................40

6.2. Configuring Unicorn 3112 via Voice Prompt................................................41

Unicorn 3112 User Manual

6.2.1. DHCP Mode..........................................................................................41

6.2.2. Static IP Mode.......................................................................................41

6.2.3. Configuration through a Central Server................................................41

7. SOFTWARE UPGRADE............................................................................................41

8. RESTORE FACTORY DEFAULT SETTINGS............................................................42

9. TECHNICAL SUPPORT CONTACT..........................................................................42

1. WELCOME

Unicorn 3112 is an all-in-one VoIP integrated access device that features superb

audio quality, rich functionalities, high level of integration, compactness and

ultra-affordability. The Unicorn 3112 is fully compatible with SIP industry standard and can

interoperate with many other SIP compliant devices and software on the market.

Special compatibility features include:

Nortel MCS

Standard SIP

Broadsoft

Howdy

2. WHAT IS IN THE PACKAGE

The Unicorn 3112 package contains:

One Unicorn 3112 VoIP adapter

One universal power supply

One Ethernet cable

One phone cable

3. PRODUCT OVERVIEW

3.1.Key Features

Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS,

DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc.

Built-in router, NAT, Gateway and DMZ port forwarding

Unicorn 3112 User Manual

Supports call origination and termination from/to the PSTN network(via FXO Port)

Powerful digital signal processing (DSP) to ensure superb audio quality;

advanced adaptive jitter control and packet loss concealment technology

Support various vocoders including G.711 (a-law and u-law), G.723.1 (5.3K/6.3K),

G.726 (40K/32K/24K/16K), as well as G.728, G.729A/B, and iLBC(Pending).

Support Caller ID/Name display or block, Hold, Call Waiting/Flash, Call Transfer, Call

Forward, in-band and out-of-band DTMF, Dial Plans, etc.

Support fax pass through T.30 and T.38.

Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise

Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain Control)

Support standard encryption and authentication (DIGEST using MD5 and MD5-sess)

Support for Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)

Support automated NAT traversal without manual manipulation of firewall/NAT

Support device configuration via built-in IVR, Web browser or central configuration file

through TFTP or HTTP

Support firmware upgrade via TFTP or HTTP with encrypted configuration files. Ultra

compact (wallet size) and lightweight design, great companion for travelers

Compact, lightweight Universal Power adapter.

3.2.Hardware specification

Model Unicorn 3112

LAN interface

1 x RJ45 100MBase-T

WAN interface

1 x RJ45 100MBase-T

FXS telephone port

1 x FXS

FXO port

1 x FXO

LED light

Green and red color

Universal switching power supply Input: 100-240VAC 50-60 Hz

Output: +5VDC, 1200mA,

UL certified

Dimension

70mm (W) ×130mm (D)×27mm (H)

Weight

0.30kg

Temperature 40 – 130 F

5 – 45 C

Humidity

10 - 90%

Unicorn 3112 User Manual

4. INSTALLATIONS

The Unicorn 3112 is an all-in-one VoIP integrated device designed to be a total solution for

networks providing VoIP services. The Unicorn 3112 VoIP features are available when

you connect any regular analog telephone to it.

Unicorn 3112 has one FXS port (labeled “Phone”) and one PSTN pass through port

(labeled “Line”). After setting up the Unicorn 3112, you can make PSTN calls by pressing

*00. Without pressing *00, all your calls will be VoIP. You can also receive PSTN calls

and VoIP calls.

The following photo illustrates the Interconnection Diagram of the of a Unicorn 3112:

Following are the steps to install a Unicorn 3112:

Connect a standard touch-tone analog telephone to the “Phone” port.

Unicorn 3112 User Manual

Insert a standard RJ11 telephone cable (included with package) into the “Line” port and

connect the other end of the telephone cable to a wall jack.

Connect a PC to the LAN port of Unicorn 3112 (Ethernet cable is included with

package).

Insert another Ethernet cable into the WAN port of Unicorn 3112 and connect the other

end of the Ethernet cable to an uplink port (a router, switch, hub, modem, etc)

Insert the powers supply (included with package) into the Unicorn 3112 and connect it to

a power outlet.

4.1.Safety

The Unicorn 3112 is compliant with various safety standards including FCC/CE and

C-Tick. Its power adaptor is compliant with UL standard. The Unicorn 3112 should only

operate with the universal power adaptor provided in the package.

Warning: Please do not use a different power adapter. Using other power

adapter may damage the Unicorn 3112 and will void the manufacturer warranty!

Caution: Changes or modifications to this product not expressly approved by Hanlong

Technology, or operation of this product in any way other than as detailed by this User

Manual, could void your manufacturer warranty.

Information in this document is subject to change without notice. No part of this document

may be reproduced or transmitted in any form or by any means, electronic or mechanical,

for any purpose without the express written permission of Hanlong Technology.

5. BASIC OPERATIONS

5.1.Get Familiar with Voice

Unicorn 3112 has stored a voice prompt menu for quick access to settings and simple

configuration. You can enter this voice prompt menu as follows:

Pick up the receiver (or press the Handsfree button) of the analog telephone and press

“***”

A voice will say, “Enter the new option.” At this point, you can select from the following

menu voice prompt options to begin using the Unicorn 3112:

Voice Will Say the Following:

Main

Menu “Enter a Menu Option” Enter “*” for the next menu option

Enter “#” to return to the main menu

Unicorn 3112 User Manual

Enter 01 – 07,12 - 17, 47, 86 or 99 Menu

option

01 “DHCP Mode”, “Static IP Mode” Enter ‘9’ to toggle the selection

If user selects “Static IP Mode”, user need

configure all the IP address information

through menu 02 to 05.

If user selects “Dynamic IP Mode”, the

device will retrieve all IP address

information from DHCP server

automatically when user reboots the

device.

02 “IP Address “ + IP address The current WAN IP address is

announced Enter 12-digit new IP address

if in Static IP Mode.

03 “Subnet “ + IP address Same as Menu option 02

04 “Gateway “ + IP address Same as Menu option 02

05 “DNS Server “ + IP address Same as Menu option 02

06 “MAC Address” Announces the Mac address of the unit.

07 Preferred Vocoder Enter “9” to go to the next selection in the

list:

PCM U

PCM A

G-726

G-723

G-729

12 WAN Port Web Access Enter “9” to toggle between enable and

disable

13 Firmware Server IP

Address Announces current Firmware Server IP

address. Enter 12 digit new IP address.

14 Configuration Server IP

Address Announces current Config Server Path IP

address. Enter 12 digit new IP address.

15 Upgrade Protocol Upgrade protocol for firmware and

configuration update.

Enter “9” to toggle between TFTP and

HTTP

16 Firmware Version Firmware version information.

17 Firmware Upgrade Firmware upgrade mode. Enter “9” to

rotate among the following three options:

1. always check

2. check when pre/suffix changes

3. never upgrade

47 “Direct IP Calling” Enter the target IP address to make a

direct IP call, after dial tone. (See “Make

Unicorn 3112 User Manual

a Direct IP Call”.)

99 “RESET” Enter “9” to reboot the device; or

Enter MAC address to restore factory

default setting (See Restore Factory

Default Setting section)

“Invalid Entry” Automatically returns to Main Menu

Other Menu Prompt Features:

“*” shifts down to the next menu option

“#” returns to the main menu

“9” functions as the ENTER key in many cases to confirm an option

All entered digit sequences have known lengths - 2 digits for menu option and 12 digits

for IP address. Once all of the digits are collected, the input will be processed.

Incorrect keyed entry cannot be deleted or undone. The Unicorn 3112 will prompt you

to start over by telling you that you made an error.

5.2.Make Phone call

5.2.1. Calling Phone or Extension Numbers

Dial the number directly and wait for 4 seconds (Default is 4 seconds. To change the

default, change the settings via the web configuration page under “No Key Entry

Timeout”). Or

Dial the number directly, and press # (assuming that “Use # as Dial Key” is set to “YES”

during web configuration of your Unicorn 3112).

Other functions available during the call are call-waiting/flash, call-transfer, and

call-forward. Your SIP gatekeeper/proxy server needs to support these features in order

for them to work.

5.2.2. Call Hold

While in conversation, pressing the “FLASH” button on the attached phone will put the

remote end on hold. Pressing the “FLASH” button again will release the previously Hold

party and the bi-directional media will resume.

5.2.3. Call Waiting

If call waiting feature is enabled, while the user is in a conversation, he will hear a special

Unicorn 3112 User Manual

stutter tone if there is another incoming call. User can press the flash button to put the

current call party on hold and switch to the other call. Pressing flash button toggles

between two active calls.

5.2.4. 3-way Conferencing

Unicorn3112 supports 3-way conference in two styles: star code style or Bellcore style.

Star Code Style 3-way Conference

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a

dial tone.

2. A dials *23 then C’s number then # (or wait for 4 seconds).

3. If C answers the call, then A press “flash” to bring B, C in the conference.

4. If C does not answer the call, A can press “flash” back to talk to B.

Bellcore Style 3-way Conference

Bellcore style 3-way conference is also supported. To do this, user needs to enable “Use

Bell-style 3-way Conference” in FXS web configuration.

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a

dial tone.

2. A dials C’s number then # (or wait for 4 seconds).

3. If C answers the call, then A press “flash” to bring B, C in the conference.

4. If C does not answer the call, A can press “flash” back to talk to B.

5.2.5. Direct IP-to-IP Calls

Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another

VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy.

Elements necessary to completing a Direct IP Call:

1. Both Unicorn3112 and other VoIP Device, have public IP addresses, or

2. Both Unicorn3112 and other VoIP Device are on the same LAN using private IP

addresses, or

3. Both Unicorn3112 and other VoIP Device can be connected through a router using

public or private IP addresses (with necessary port forwarding or DMZ).

Unicorn3112 supports two ways to make Direct IP Calling:

Using IVR

1. Pick up the analog phone then access the voice menu prompt by dial “***”

2. Dial “47” to access the direct IP call menu

Unicorn 3112 User Manual

3. Enter the IP address using format ex. 192*168*0*160 after the dial tone.

Using Star Code

1. Pick up the analog phone then dial “*47”

2. Enter the target IP address using same format as above.

Note: NO dial tone will be played between step 1 and 2.

Destination ports can be specified by using “*” (encoding for “:”) followed by the port

number.

Examples:

a) If the target IP address is 192.168.0.160, the dialing convention is

*47 or Voice Prompt with option 47, then 192*168*0*160.

followed by pressing the “#” key if it is configured as a send key or wait 4 seconds. In this

case,the default destination port 5060 is used if no port is specified.

b) If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be:

*47 or Voice Prompt with option 47, then 192*168*0*160*5062 followed by pressing the

“#” key, if it is configured as a send key or wait for 4 seconds.

NOTE: When completing direct IP call, the “Use Random Port” should set to “NO”.

5.2.6. Blind Transfer

Assuming that call party A and party B are talking to each other on the phone. Party A

wants to transfer party B to party C:

Party A presses FLASH (on the analog phone, or Hook Flash for old model phones) to

get a dial tone.

Then party A dials *87 then dials party C’s number, and then # (or wait for 4 seconds)

Party A can hangs up the phone.

Note: Call features have to be activated during web configuration by selecting YES to

“Enable Call Features”. These features need to be supported by your

SIP gatekeeper/proxy server in order to work.

Party A can hold on to the phone and wait for one of the three following events:

1. A quick confirmation tone (temporarily using the call waiting indication

tone) followed by a dial tone. This indicates the transfer is successful (transferee

has received a 200 OK signal from transfer target). At this point, party A can either

hang up or make another call.

2. A quick busy tone followed by a restored call (on supported SIP

gatekeeper platforms only). This means the transferee has received a 4xx

response signal for the INVITE and will try to recover the call. The busy tone is just to

indicate to the transferor that the transfer has failed.

3. Busy tone keeps playing. This means the Unicorn 3112 has failed to receive the

Tabla de contenidos

Otros manuales de Adaptador de Hanlong

Hanlong

Hanlong Unicorn 3101 Manual de usuario

Hanlong

Hanlong Unicorn 3101 Manual de usuario

Hanlong

Hanlong Unicorn 3001 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario