Hangar 9 Tribute 4D 36 Plug-N-Play Manual de usuario

Wingspan: ............................... 44 5/8" (1133.4mm)

Fuselage length: ........................... 48" (1219.2mm)

Wing area: ........................ 690 sq. in. (44.5 sq dm)

ASSEMBLY MANUAL

Tribute 4D 36

Plug-N-Play™

Weight: ................................ 4–4.5 Lbs (1.8–2 kg)

Engine: .................... Evolution™ .36 NT (Included)

Radio: ................................. 4 channel w/ 5 servos

Specifications





Replacement Parts Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Additional Required Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Covering Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Additional Required Tools and Adhesives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Field Equipment Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Using the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Before Starting Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Section 1: Receiver Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Section 2: Installing the Stabilizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Section 3: Landing Gear Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Section 4: Propeller and Spinner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Section 5: Wing Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Adjusting the Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Control Throws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Flying Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Balancing the Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Range Testing the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Preflight at the Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

2005 Official AMA National Model Aircraft Safety Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Table of Contents

Recommended JR® Systems

• PCM10X

• XP9303

• XP8103

• X-378

• XP6102

• XF631

• XF421

• Quattro

Large Parts:

A. Fuselage HAN2926

B. Wing HAN2927

C. Side Force Generator HAN2928

D. Elevator/Stabilizer HAN2933

E. Rudder HAN2934

Items Not Shown:

Fuel Tank

Tail Wheel Assembly HAN2913

Decal Set HAN2932

Pushrod Set HAN2935

Landing Gear HAN2929

Wheels HAN2930

• White HANU870

• True Red HANU866

• Deep Blue HANU873

JR XP6102

JR XP9303

Covering Colors

Replacement Parts Layout

Additional Required Equipment

This manual is divided into sections to help make assembly easier to understand, and to provide breaks between each

major section. Remember to take your time and follow the directions.

Tools

• Flat blade screwdriver

• Phillips screwdriver (small)

• Crescent wrench

• Threadlock

Other Required Items

• Felt-tipped pen or pencil

• Measuring device (e.g. ruler, tape measure)

• Covering Iron (HAN101)

• Covering Glove (HAN150)

• Sealing Iron Sock (HAN141)

An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open areas,

preferably at AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included with your

radio and engine.

• Propeller APC 11x4 (APC11040)

• Fuel

• Glow Plug Wrench (HAN2510)

• Glow Plug Igniter with Charger (HAN7101)

• Glow Plug (HAN3001/3006)

• Manual Fuel Pump (HAN118)

Field Equipment Required

Using the Manual

Additional Required Tools and Adhesives

Warning

Before beginning the assembly of your Tribute™ 36, remove each part from its bag for inspection. Closely inspect the

fuselage, wing panels, rudder, stabilizer and side force generators for damage. If you find any damaged or missing parts,

contact the place of purchase.

If you find any wrinkles in the covering, use a heat gun or covering iron to remove them. Use caution while working

around areas where the colors overlap to prevent separating the colors.

Horizon Hobby, Inc. guarantees this kit to be free from defects in both material and workmanship at the date of purchase.

This warranty does not cover any component parts damaged by use or modification. In no case shall Horizon Hobby’s

liability exceed the original cost of the purchased kit. Further, Horizon Hobby reserves the right to change or modify this

warranty without notice.

In that Horizon Hobby has no control over the final assembly or material used for the final assembly, no liability shall

be assumed nor accepted for any damage resulting from the use of the final assembled product. By the act of using the

assembled product, the user accepts all resulting liability.

Please note that once assembly of the model has been started, you must contact Horizon Hobby, Inc. directly regarding

any warranty question. Please do not contact your local hobby shop regarding warranty issues, even if that is where you

purchased it. This will enable Horizon to better answer your questions and service you in the event that you may need any

assistance.

If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return

this kit immediately in new and unused condition to the place of purchase.

Horizon Hobby, Inc.

4105 Fieldstone Road

Champaign, Illinois 61822

(877) 504-0233

horizonhobby.com

HAN100 – Heat Gun

HAN150 – Covering Glove

HAN101 – Covering Iron

HAN141 – Sealing Iron

Sock

Before Starting Assembly

Warranty Information

Required Parts

• Wing assembly • Radio hatch

• 3mm x 12mm sheet metal screw (4)

Required Tools and Adhesives

• Phillips screwdriver (small)

 Step 1

Wrap your receiver in foam to protect it from vibration.

Place the receiver into the opening in the wing.

 Step 2

A tube has been installed in the wing for the receiver

antenna. Route the antenna through the tube, which exits

the right wing tip.

 Step 3

Secure the radio hatch using four 3mm x 12mm sheet

metal screws.

Note: The receiver and battery may be moved

when checking the Center of Gravity.

Section 1: Receiver Installation

Required Parts

• Stabilizer assembly • Fuselage

• Stabilizer fixing screw (2)

Required Tools and Adhesives

• Threadlock

 Step 1

Locate the stabilizer/elevator assembly. Position the

stabilizer/elevator assembly so the control horn will

face down, away from the fin. Carefully slide the

assembly into the fuselage.

 Step 2

Secure the stabilizer using the two stabilizer fixing screws.

It’s a good idea to use a drop of threadlock on the threads

to keep them from loosening during flight.

 Step 3

Attach the clevis to the elevator horn. With the radio on,

center the elevator servo. Thread the clevis in or out so the

elevator is in neutral.

Section 2: Installing the Stabilizer

Required Parts

• Fuselage assembly • 3mm x 40mm bolt

• 3mm wing nut • Landing gear (2)

Required Tools and Adhesives

• Phillips screwdriver (small) • Threadlock

 Step 1

Slide the three 3mm x 40mm bolts into one of the landing

gear halves. Slide the bolts into the fuselage.

 Step 2

Slide the remaining landing gear half onto the bolts.

Secure the gear using three 3mm wing nuts.

Note: Use threadlock on the wing nuts to

prevent them from loosening during flight.

Section 3: Landing Gear Installation

Required Parts

• Fuselage • Propeller

• Spinner

• #4 x 5/8" sheet metal screw (2)

Required Tools and Adhesives

• Crescent wrench

 Step 1

Remove the propeller nut and washer from the engine.

Position the drive washer so it is keyed onto the engine

shaft. Slide the spinner backplate onto the engine shaft,

and then slide the propeller into position.

 Step 2

Slide the washer and thread the nut onto the engine shaft.

Rotate the propeller clockwise so it is resting against the

lugs of the spinner backplate. Use a crescent wrench to

tighten the propeller nut. Do not use pliers, as the nut will

not be tight enough, and could come loose.

Note: It is suggested to read the engine

instructions at this time to learn more on the

care and operation of your engine.

 Step 3

Locate the two #4 x 5/8" sheet metal screws. Position the

spinner cone onto the spinner backplate, making sure

it keys into the backplate. Use the screws and a Phillips

screwdriver to secure the spinner cone to the backplate.

Section 4: Propeller and Spinner

Required Parts

• Wing • Fuselage

• 1/4-20 x 2" nylon bolt • Canopy hatch

• Side force generator • 3mm wing nut (2)

• #2 x 1/4" screw (8)

• 1/4-20 x 2" nylon winged bolt (2)

Required Tools and Adhesives

• Flat blade screwdriver • Threadlock

 Step 1

Place the wing onto the fuselage. Connect the servo leads

and guide them into the fuselage Secure the front of the

wing using the two 1/4-20 x 2" nylon winged bolts. Leave

the bolts slightly loose for now.

 Step 2

The final bolt goes into the hole at the rear of the

canopy hatch. Use a flat blade screwdriver to tighten

the bolt. Once tightened, go back and tighten the bolts

installed in Step 1.

 Step 3

Slide the side force generators into the wing. The one

with the threaded rod slides in from the top. Secure the

generators using the 3mm wing nuts. Do not over-tighten

the nuts and damage the generators.

 Step 4

If you are not planning on using the side force generators,

secure the side force generator plugs to the wing using

#2 x 1/4" screws.

Note: The SFG's can be easily removed in a

few seconds. Try your Tribue™ 36 with and

without to decide which setup suits your

flying style best.

 Step 5

Apply the decals to customize your Tribute 36.

Section 5: Wing Installation

Tabla de contenidos

Otros manuales de Juguete de Hangar 9

Hangar 9

Hangar 9 Clipped Wing Taylorcraft ARF Manual de usuario

Hangar 9

Hangar 9 F-22 Raptor PTS Manual de usuario

Hangar 9

Hangar 9 Ultra Stick 60 Manual de usuario

Hangar 9

Hangar 9 Ultra Stick 40 ARF Manual de usuario

Hangar 9

Hangar 9 RV-8 Manual de usuario

Hangar 9

Hangar 9 P-47D-40 Thunderbolt 30cc ARF Manual de usuario

Hangar 9

Hangar 9 Beast 100 Manual de usuario

Hangar 9

Hangar 9 Twin Otter ARF Manual de usuario

Hangar 9

Hangar 9 Alpha 40 ARF Manual de usuario

Hangar 9

Hangar 9 P-51 PTS Mustang Mk II Manual de usuario

Hangar 9

Hangar 9 Taylorcraft 20cc ARF Manual de usuario

Hangar 9

Hangar 9 P-47D-1 Thunderbolt 60 Manual de usuario

Hangar 9

Hangar 9 fokker D.VII Manual de usuario

Hangar 9

Hangar 9 Katana 50 ARF Manual de usuario

Hangar 9

Hangar 9 Cap232 Manual de usuario

Hangar 9

Hangar 9 Cessna 182 Skylane Manual de usuario

Hangar 9

Hangar 9 Model 12 Viking 120cc Manual de usuario

Hangar 9

Hangar 9 Pulse XT 60 ARF Manual de usuario

Hangar 9

Hangar 9 P-47 thunderbolt Manual de usuario

Hangar 9

Hangar 9 F4U Corsair .60 ARF Manual de usuario

Hangar 9

Hangar 9 Carden Aircraft Edition 89" Extra 300... Manual de usuario

Hangar 9

Hangar 9 Hangar 9 P-51 Mustang ARF Manual de usuario

Hangar 9

Hangar 9 Hangar 9 Solo Manual de usuario

Hangar 9

Hangar 9 toledo special 40 Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario