HAMPTON BAY Miramar Manual de usuario

Miramar

60 in Ceiling Fan

Owner’s Manual

Miramar

Ventilador de Techo de 1,52 m

Manual del Propietario

458 242

Miramar por Hampton Bay

60” Miramar

Ceiling Fan by Hampton Bay

Date Purchased

Store Purchased

UL Model No.

Serial No.

Vendor No.

UPC

Thank you for purchasing our ceiling fan. This product has been

manufactured with the highest standards of safety and quality.

Table of Contents

Safety Rules . . . . . . . . . . . . . . . . . . . . 1

Unpacking Your Fan . . . . . . . . . . . . . . 2

Installing Your Fan . . . . . . . . . . . . . . . 3

Installing the Light Kit . . . . . . . . . . . 10

Operating Your Transmitter . . . . . . . . . . . 11

Care of Your Fan . . . . . . . . . . . . . . . . 13

Troubleshooting . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . 14

Warranty Information . . . . . . . . . . . . 15

792145353928

219032

458-242

Safety Rules - Read and Save These Instructions

To reduce the risk of electric shock, insure electricity has been turned off

at the circuit breaker or fuse box before beginning.

All wiring must be in accordance with the National Electrical Code

“ANSI/NFPA 70-1999” and local electrical codes. Electrical installation

should be performed by a qualified licensed electrician.

WARNING: To reduce the risk of electrical shock or fire, do not use this

fan with any solid-state fan speed control device. It will permanently

damage the electronic circuitry.

CAUTION: To reduce the risk of personal injury, use only the screws

provided with the outlet box.

The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 50 pounds. Use only UL

Listed outlet boxes marked “FOR FAN SUPPORT”.

The fan must be mounted with a minimum of 7 feet clearance from the

trailing edge of the blades to the floor.

Avoid placing objects in path of the blades.

To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

Do not use water or detergents when cleaning the fan or fan blades. A dry

dust cloth or lightly dampened cloth will be suitable for most cleaning.

After making electrical connections, spliced conductors should be turned

upward and pushed carefully up into outlet box. The wires should be

spread apart with the grounded conductor and the equipment-grounding

conductor on one side of the outlet box and ungrounded conductor on the

other side of the outlet box.

All set screws must be checked and retightened where necessary before

installation.

10.

11.

WARNING

TO REDUCE THE RISK OF PERSONALL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS FLANGES), WHEN INSTALLING

THE BRACKETS, BALANCING THE BLADES OR CLEANING THE FAN.

DO NOT INSERT FOREIGN OBJECTS IN – BETWEEN ROTATING FAN

BLADES.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL

INJURY, MOUNT TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN

SUPPORT OF 22.7 KG (50 LBS.) OR LESS" AND USE MOUNTING SCREWS

PROVIDED WITH THE OUTLET BOX.

ATTENTION

FAN INCLUDES A 190W LIMITER TO COMPLY WITH THE

DEPARTMENT OF ENERGY 2009 REGULATION. LAMPING THIS

PRODUCT OVER 190W WILL CAUSE THIS FAN TO NOT LIGHT. PLEASE

USE BULBS WITH A TOTAL WATTAGE UNDER THE 190W

REGULATION.

Unpacking Your Fan Unpack your fan and check the contents. You should have the following items:

Set of blades (5)

Canopy assembly

Ball/downrod assembly

Decorative top coupling cover

Decorative scroll

Decorative bottom coupling cover

Fan motor assembly

Set of blade arms (5)

Top glass housing

Light plate

Bottom glass shade

Transmitter+holder+2 mounting screws

60Watt candelabra bulb

15Watt candelabra bulbs (4)

10.

11.

12.

13.

14.

Blade Attachment Hardware

(16 Screws with Fiber Washers)

Electrical Hardware

(3 Plastic Wire Nuts)

Decorative Scroll Mounting Hardware

(9 Screws)

Balance Kit

WARNING

DO NOT INSTALL OR USE FAN IF ANY

PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-877-902-5588.

Installing Your Fan

Tools Required

Mounting Options

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR PERSONAL INJURY, MOUNT TO OUTLET BOX

MARKED "ACCEPTABLE FOR FAN SUPPORT OF

22.7 KG (50 LBS.) OR LESS" AND USE MOUNTING

SCREWS PROVIDED WITH THE OUTLET BOX.

MOST OUTLET BOXES COMMONLY USED FOR

THE SUPPORT OF LIGHT FIXTURES ARE NOT

ACCEPTABLE FOR FAN SUPPORT AND MAY

NEED TO BE REPLACED. DUE TO THE

COMPLEXITY OF THE INSTALLATION OF THIS

FAN, A QUALIFIED LICENSED ELECTRICIAN IS

STRONGLY RECOMMENDED.

Figure 2

Figures 1~3 are examples of different ways to

mount the outlet box.

Outlet Box

Figure 1

To hang your fan where there is an existing fixture

but no ceiling joist, you may need an installation

heavy duty fan brace as shown in Figure 2

(available at any Home Depot store).

Figure 3

Heavy Duty Outlet Box for Fan

Heavy Duty Fan Brace

Provide Strong Support

Recessed

Outlet Box

Mounting bracket

opening must be

toward the top

If there isn't an existing UL listed mounting box,

then read the following instructions. Disconnect

the power by removing fuses or turning off circuit

breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and building

materials. The outlet box and its support must be

able to fully support the moving weight of the fan

(at least 50 lbs). Do not use plastic outlet boxes.

Note: You may need a longer downrod to

maintain proper blade clearance when installing

on a steep, sloped ceiling. The maximum angle

allowable is 25°. If the canopy touches downrod,

remove the decorative canopy bottom cover and

turn the canopy 180°before attaching the canopy

to the mounting plate.

Phillips screwdriver, straight slot screwdriver, step

ladder and wire cutters.

WARNING

FAILURE TO PROPERLY INSTALL COTTER

PIN AS NOTED IN STEP 5 COULD RESULT IN

FAN LOOSENING AND POSSIBLY FALLING.

Screws

Bottom

Decorative

Coupling

Cover

Screws

Scroll Coupling

Decorative Scroll

Figure 4

Remove the decorative canopy bottom cover

from the canopy by turning the cover counter

clockwise. (Figure 5)

Remove the mounting bracket from the canopy

by removing the 1 of 2 screws from the bottom

of the mounting bracket and loosening the

other one a half turn from the screw head.

Next, turn the canopy counter clockwise to

removing the mounting bracket from the

canopy. (Figure 5)

Remove the clevis pin, cotter pin and set

screws from the scroll coupling. (Figure 6)

Route the wires and safety cable exiting from

the decorative scroll through the upper

coupling cover, canopy cover, canopy and then

through the ball/downrod assembly. (Figure 6)

Align the holes at the bottom of the downrod

with the holes in the scroll coupling on top of

the decorative scroll (Figure 6). Carefully

insert the clevis pin through the holes in the

collar and downrod. Be careful not to jam the

clevis pin against the wiring inside the

downrod. Insert the cotter pin through the hole

near the end of the clevis pin until it snaps into

its locked position, as noted in the circle inset

of Fig. 6.

6. Tighten two set screws firmly on the coupling

located at top of the decorative scroll. Slip the

upper coupling cover onto the coupling, The

decorative scroll assembly is now completed.

Installing the Decorative

Scroll Assembly

Installing the Downrod

Secure the decorative scroll to the scroll

coupling with two screws provided, repeat the

procedure with the remaining decorative

scrolls. (Figure 4)

Remove the screw from the bottom of scroll

coupling, installing the bottom decorative

coupling cover onto the scroll coupling and

securing with the screw provided. (Figure 4)

For packaging purpose, the decorative scroll is

packed disassembled, proceed the following steps

for proper decorative scroll assembly:

Figure 5

Ceiling

Mounting

Bracket

Ceiling Canopy

Canopy Bottom

Cover

Remove the set screws, clevis pins and cotter

pins from the decorative scroll assembly,

place the decorative scroll in the top plate of

motor assembly, align the screw holes at the

bottom of decorative scroll with holes in the

top plate of fan motor assembly and then

secure with the set screws and clevis pins,

insert the cotter pin through the hole near the

end of the clevis pin until it snaps into its

locked position. Repeat the procedure for the

remaining decorative scrolls. NOTE: Make

sure the three rods are evenly set on the plate

of the motor assembly.

Snap together the wire connection plugs from

decorative scroll assembly and fan motor

assembly. (Figure 7)

Remove the nut and washers from the top plate

of motor assembly and then place the looped

end of the safety cable from the decorative

scroll between the two washers and secure with

nut provided. (Figure 7)

Connection

Plugs

Figure 7

Decorative

Scroll Cotter Pin

Clevis

Screws with

Washers

Safety Cable

Top Plate

Washer Nut

Motor Wires

Ball/Downrod

Assembly

Ceiling Canopy

Canopy Cover

Scroll Coupling

Upper Decorative

Coupling Cover

Cotter Pins

Tighten Screw

Firmly

Clevis Pin

Figure 6

Pin in Locked

Positioon

Attaching the Fan Motor

Assembly

Figure 9

Groove

Tab

WARNING

THE TAB IN THE RING MUST REST IN THE

GROOVE OF THE HANGER BALL AS FIGURE 9.

FAILURE TO PROPERLY SEAT THE TAB IN

THE GROOVE COULD CAUSE DAMAGE TO

WIRING.

Figure 8

Ceiling

Mounting

Bracket

120V

Wires

Washers

Tab

UL Listed

Outlet Box

Posts in the

Outlet Box

Mounting

Screws (Supplied

with Electrical Box)

Figure 10

Safety Cable

Ceiling

Mounting

Bracket

Installing Fan to the

Electrical Box

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR OTHER PERSONAL INJURY.

MOUNT FAN ONLY TO AN OUTLET BOX OR

SUPPORTING SYSTEM MARKED ACCEPTABLE

FOR FAN SUPPORT AND USE THE MOUNTING

SCREWS PROVIDED WITH THE OUTLET BOX.

WARNING

Pass the 120-volt supply wires through the

center hole in the ceiling mounting bracket as

shown in Figure 8.

Install the ceiling mounting bracket to the

outlet box; be sure to align the holes in the

hanger bracket with the post holes in the outlet

box and secure with screws and washers

provided by the outlet box. (Fig. 8)

Security tighten the two mounting screws.

Carefully lift the fan assembly up to the ceiling

mounting bracket and seat the hanger ball in

the mounting bracket socket. Make sure the tab

on the mounting bracket socket is properly

seated in the groove in the hanger ball (Figure

9). This will help to balance the ceiling fan.

Secure the safety cable to the building structure

as shown in Figure 10.

Making the Electrical

Connections

Connect the fan supply (black) wire to the

black household supply wire as shown in

Figure 11.

Connect the neutral fan (white) wire to the

white neutral household wire.

Connect the fan ground wire (green) to the

household ground wire.

After connecting the wires, spread them apart

so that the green and white wires are on one

side of the outlet box and the black wires are on

the other side.

Turn the connecting nuts upward and push the

wiring into the outlet box.

REMEMBER to disconnect the power.

If you feel you do not have enough electrical

wiring knowledge or experience, have your fan

installed by a licensed electrician.

Follow the steps below to connect the fan to your

household wiring. Use the wire nuts supplied with

your fan. Secure the wire nuts with electrical tape.

Make sure there are no loose strands or

connections.

Figure 11

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green Ground

Lead

Ground to

Downrod

BLACK

WHITEWHITE

BLACK

GREEN

WARNING

CHECK TO SEE THAT ALL CONNECTIONS ARE

TIGHT, INCLUDING GROUND, AND THAT NO

BARE WIRE IS VISIBLE AT THE WIRE NUTS.

EXCEPT FOR THE GROUND WIRE.

WARNING

ELECTRICAL DIAGRAMS ARE FOR REFER-

ENCE ONLY. OPTIONAL USE OF ANY LIGHT

KIT SHALL BE UL LISTED AND MARKED

SUITABLE FOR USE WITH THIS FAN.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK. DO NOT USE THIS FAN WITH ANY

SOLID-STATE SPEED CONTROL DEVICE.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de HAMPTON BAY

HAMPTON BAY

HAMPTON BAY ASHBURTON YG593-WH Manual de usuario

HAMPTON BAY

HAMPTON BAY Sabitini Manual de usuario

HAMPTON BAY

HAMPTON BAY CEDAR LAKE 52109 Manual de usuario

HAMPTON BAY

HAMPTON BAY SOUTHWIND 52371 Manual de usuario

HAMPTON BAY

HAMPTON BAY 1002 275 335 Manual de usuario

HAMPTON BAY

HAMPTON BAY Moonlight Manual de usuario

HAMPTON BAY

HAMPTON BAY GAZEBO II YG188-WH Manual de usuario

HAMPTON BAY

HAMPTON BAY 803-548 Manual de usuario

HAMPTON BAY

HAMPTON BAY Copperhead Manual de usuario

HAMPTON BAY

HAMPTON BAY TUCSON 51548 Manual de usuario

HAMPTON BAY

HAMPTON BAY CAPRICE SW19151R MWH Manual de usuario

HAMPTON BAY

HAMPTON BAY 9100 Manual de usuario

HAMPTON BAY

HAMPTON BAY BPT18-34A-1 Manual de usuario

HAMPTON BAY

HAMPTON BAY 52101 Manual de usuario

HAMPTON BAY

HAMPTON BAY GAZEBO YG188-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY YG763-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY TIPTON II 52 INCH Manual de usuario

HAMPTON BAY

HAMPTON BAY OSCW-24M BK Manual de usuario

HAMPTON BAY

HAMPTON BAY 32711 Manual de usuario

HAMPTON BAY

HAMPTON BAY 52-PM Manual de usuario

HAMPTON BAY

HAMPTON BAY AK404-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY SINCLAIR Manual de usuario

HAMPTON BAY

HAMPTON BAY 582-052 Manual de usuario

HAMPTON BAY

HAMPTON BAY Rocio Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje