HAMPTON BAY 45071-050 Manual de usuario

Item #1008 624 851

Model #45071-050

USE AND CARE GUIDE

20-INCH INDOOR CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday,

9 a.m. - 6 p.m., EST, Saturday.

1-855-HD-HAMPTON

HAMPTONBAY.COM

THANK YOU

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

Item #1008 624 853

Model #45071-010

Item #1008 624 858

Model #45071-040

Table of Contents ................................................................ 2

Safety Information............................................................... 2

Warranty ............................................................................... 3

Pre-Installation .................................................................... 3

Installation............................................................................ 6

Operation ........................................................................... 9

Care and Cleaning............................................................. 11

Troubleshooting................................................................. 11

Safety Information

Table of Contents

READ AND SAVE THESE INSTRUCTIONS.

All wiring must be in accordance with the National Electrical

Code ANSI/NFPA 70 and local electrical codes. Electrical

installation should be performed by a qualiﬁed licensed

electrician.

To avoid personal injury or damage to the fan and other items,

use caution when working around or cleaning the fan.

All setscrews must be checked and retightened where

necessary before installation.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

Changes or modiﬁcations not expresslyCAUTION:

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

WARNING: To reduce the risk of personal injury, do not

WARNING:

bend the blade brackets when installing the brackets,

balancing the blades, or cleaning the fan. Do not insert

foreign objects in between rotating fan blades.

To reduce the risk of ﬁre, electric shock

or personal injury, mount to an outlet box marked

“acceptable for fan support of 15.9 kg (35 lbs) or less”

and use screws provided with the outlet box.

WARNING:

shock, do not use this fan with any solid-state speed

control device.

To reduce the risk of ﬁre or electric

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

FCC Statement

...................................................................12

Thefan must bemounted with a minimumCAUTION:

of 7 ft. (2.1m) of clearance from the trailing edge of the

blades to the ﬂoor.

□

Pre-Installation

Warranty

TOOLS REQUIRED

NOTE: These are approximate measures. They do not

include the amps and wattage used by the light kit.

Phillips

screwdriver

Electrical

tape

Wire

cutter

Step ladder

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of a lifetime

after the date of purchase by the original purchaser. We warrant that the light kit to be free from defects in workmanship and material at the time of

shipment from the factory for a period of three years after the date of purchase by the original purchaser. We also warrant that all other fan parts,

excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of

two years after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a

comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All

costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by

afﬁxing any accessories, are not covered by this warranty. Because of varying climatic conditions, this warranty does not cover any changes in brass

ﬁnish, including rusting, pitting, corroding, tarnishing or peeling. Brass ﬁnishes of this type give their longest useful life when protected from varying

weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons

shall render the warranty invalid. There is no other express warranty. We hereby disclaim any and all warranties, including but not limited to those

of merchantability and ﬁtness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be

disclaimed is limited to the time period as speciﬁed in the express warranty. Some states do not allow limitation on how long an implied warranty

lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in

connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or

consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives speciﬁc legal rights, and you may also have

other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of the product as part

of a claim on the warranty must be paid by the customer.

SPECIFICATIONS

136.43

88.87

78.19

689

911

1011

Size Speed Volts CFM

Fan Power

Consumption

(Without Lights)

WATT

(Higher Is Better)

CFM/WATT

Net

Weight

Gross

Weight Cubic Feet

20 in.

Low

120

12.93

1.98 cu. ft.

Medium 10.25

High

5.05

5.73 lbs

(2.6 kgs)

9.47 lbs

(4.3kgs)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Wire nut

Mounting screw 4

Remote control holder screw (Machine screws #6/32 )

Plastic anchor

Remote control holder screw (Wood screws ST3.0 )

Wood screw

Part Description Quantity

Machine screw

Metal washer

Spring washer

Remote control holder screw (Wood screws ST3.0 ) 2

PACKAGE CONTENTS

Receiver

Remote control holder

Mounting plate

Fan motor assembly

Remote control

Part Description Quantity

Pre-Installation (continued)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

FBattery AAA 1.5 V 2

BREEZE COLORTEMP.

ON/ OFF ON/ OFF

6 SPEED BRIGHTNESS

TIMER

ALL

2HR

4HR

G Lead wire with connector 1

Installation

MOUNTING OPTIONS

WARNING:

personal injury, mounttooutletbox marked “acceptable

for fan support of 15.9 Kg (35 lbs) or less” using the

screwsprovided with theoutlet box. An outlet box

not beacceptable for fan support and may need to be

If your ceiling fan does not have an existing UL-listed mounting

box, then install one using the following instructions:

□Disconnect the power by removing the fuses or turning off

the circuit breakers.

□Secure the outlet box directly to the building structure.

Use the appropriate fasteners and materials. The outlet box

and its bracing must be able to fully support the weight

of the moving fan (at least 15.9 kg). Do not use a plastic

outlet box.

Outlet Box

To reduce the risk of ﬁre, electric shock, or

commonly used for the support of lighting ﬁxtures may

replaced. If in doubt, consult a qualiﬁed electrician.

Option 1

Option 2

NOTE: The illustrations on the right show two

different ways to mount the outlet box.

7HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Hanging the fan-motor assembly

Making the electrical connections

Attaching the mounting plate to

the electrical box

□Secure the mounting plate (A) to the ceiling outlet box by using

the metal washers (II), spring washers (JJ) and the screws

provided with your outlet box.

□Carefully lift the fan-motor assembly (B) and engage the slot

in the motor bracket on the top of the fan motor assembly (B)

with the hook on the mounting plate (A) so that it is securely

suspended.

Installation - Hanging the Fan

WARNING:

the electricity is turned off at the circuit breaker or main

fuse box before wiring.

To avoid possible electrical shock, ensure

WARNING:

including the ground, and that no bare wire is visible at

the wire nuts, except for the ground wire.

Check to see that all connections are tight,

BB (x4)

Outlet box

in the ceiling

Green

White

Black

Green

□Spread the wires apart so that the green and white wires

are on one side of the outlet box and the black wire is on the

other side.

□Connect the green wire from receiver (D) to the household ground

wire using a wire nut (BB).

□Connect the receiver (D) black wire to the household black

(hot) wire using a wire nut (BB).

□Connect the receiver (D) white wire to the household white

(neutral) wire using a wire nut (BB).

□Secure each wire nut (BB) using electrical tape.

□Connect the green fan wires to the mounting plate ground wire

using a wire nut (BB).

□Connect the wires from the fan motor assembly (B) to the receiver (D)

by the wire connectors, push them together.

Motor wires

(red/gray/pink)

Light kit wires

(yellow/white/red)

□Connect the lead wires (G) to receiver (D) by the wire connectors.

Installation - Hanging the Fan (continued)

Completing the fan assembly

□Install the two mounting screws (AA) on two diagonal sides

of the top of the mounting plate (A).

Push the fan motor assembly (B) up and turn it counterclockwise

to lock in the mounting plate (A). Install the mounting screws (AA)

into the remaining two holes. Tighten the four mounting screws

(AA) ﬁrmly.

□

Operation

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

NOTE:

On start up, your ceiling fan will oscillate back and forth. This is NORMAL OPERATION for a DC ceiling fan as it goes through its

calibration cycle. The fan is NOT DEFECTIVE.

Light ON/ OFF: Press and release the button (C), the light will turn ON and OFF accordingly.

Speed functions:

Fan ON/ OFF: Press and release the button (B), the fan will turn ON and OFF accordingly.

Press and release the button (F) will activate the Comfort Breeze mode.

- Alternates through speeds 1-5.

- Press and hold the button (F) for 3 seconds to cancel the comfort Breeze mode.

All ON/ OFF: Press and release the button (A) to turn the fan and light ON or OFF.

Press and release the button (G) to change the light colour from warm light to white light.

Button (D): Increases the fan speed

Press and release the button (D) one time will increase the speed of the fan.

Button (D): Decreases fan speed

Press and release the button (D) one time will decrease the speed of the fan.

Timer function

Dimmer functions:

Button (E): Increases the brightness of the light

Press and release the button (E) one time will increase the brightness of the light.

Button (E): Decreases the brightness of the light

Press and release the button (E) one time will decrease the brightness of the light.

- The timer function is only available for fan, not for the light kit.

- The timer function can only be activated when the fan is ON.

- Press the (2H/4H/8H) button (H) to set the timer.

- Hold and press the (2H/4H/8H) button (H) for 3 seconds to cancel the timer.

- When the timer is activate, press the (2H/4H/8H) button (H) again will reset the timer.

Part Symbol Part Symbol

BREEZE COLOR TEMP.

ON / OFF ON / OFF

6 SPEED BRIGHTNESS

TIMER

ALL

2HR

4HR

LED light A

5Operating the Remote Control

Operation (continued)

□Install the plastic anchors (FF) onto the wall, install the remote control

holder spacer onto the wall using two longer remote control holder

screws (CC). Attach the remote control holder (E) onto the spacer,

ensure two parts ﬁt together and no gaps, install the two shorter

remote control holder screws (EE) to the wall and secure tightly.

Turn the main power source off to begin the learning process.

Return the power to the unit.

Within 3 seconds of turning the fan’s AC power ON, and then press

the button for 5 seconds to enter the learning function. A beeping

sound is emitted when pairing is complete.

Should you desire to use another remote control (C) unit with your

new fan, install one using the steps below:

NOTE: After the AC power is on, do not press any other button

on the remote control before pressing the (ON/OFF) button.

Doing so will cause the procedure to fail.

□

Install two 1.5V (F) batteries into the remote control (C). To prevent damage to

the remote control, remove the battery if not used for long periods of time.

Espacer

Back cover

EE FF

□

WARNING: Do not short-circuit, disassemble, heat up,

connect improperly, or dispose of used batteries in ﬁre. Do

not recharge or mix batteries with used or other battery

types. Immediately remove used batteries.

WARNING: The batteries shall be disposed of properly,

including keeping them away from children; and even used

may cause injury.

WARNING: Chemical Burn Hazard. Keep batteries away

from children. Always completely secure the battery

compartment. If the battery compartment does not close

securely, stop using the product, remove the batteries, and

keep it away from children. If you think batteries might have

been swallowed or placed inside any part of the body, seek

immediate medical attention.

6Learning Process

7Installing the Remote Control Holder

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de HAMPTON BAY

HAMPTON BAY

HAMPTON BAY 786-756 Manual de usuario

HAMPTON BAY

HAMPTON BAY Capella AM113-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY 51332 Manual de usuario

HAMPTON BAY

HAMPTON BAY Lodge 285 313 Manual de usuario

HAMPTON BAY

HAMPTON BAY 52139 Manual de usuario

HAMPTON BAY

HAMPTON BAY Windward II 523 342 Manual de usuario

HAMPTON BAY

HAMPTON BAY Andover 640-655 Manual de usuario

HAMPTON BAY

HAMPTON BAY AG524PR-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY WELLSTON 51360 Manual de usuario

HAMPTON BAY

HAMPTON BAY EDELWEISS Manual de usuario

HAMPTON BAY

HAMPTON BAY 285-962 Manual de usuario

HAMPTON BAY

HAMPTON BAY Gazebo II YG187-WH Manual de usuario

HAMPTON BAY

HAMPTON BAY VERANDA 499-493 Manual de usuario

HAMPTON BAY

HAMPTON BAY YG204CI-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY FANELEE Manual de usuario

HAMPTON BAY

HAMPTON BAY Burgess 640-657 Manual de usuario

HAMPTON BAY

HAMPTON BAY LK-52PN Manual de usuario

HAMPTON BAY

HAMPTON BAY DANETREE N243A-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY Bercello Estates II Manual de usuario

HAMPTON BAY

HAMPTON BAY Windward II Manual de usuario

HAMPTON BAY

HAMPTON BAY BPT13-14HD Manual de usuario

HAMPTON BAY

HAMPTON BAY N375A-BN Manual de usuario

HAMPTON BAY

HAMPTON BAY Antigua Plus Manual de usuario

HAMPTON BAY

HAMPTON BAY 132 cm Fan Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje