Hama Duo Manual de usuario

176936

Mobile Speaker

Radio Controlled Alarm Clock“Duo”

Funkwecker

RUS

Instrucciones de uso

Руководство по эксплуатации

Istruzioni per l‘uso

Gebruiksaanwijzing

Οδηγίες χρήσης

Instrukcja obsługi

Használati útmutató

Návod kpoužití

Návod na použitie

Manual de instruções

Manual de utilizare

Bruksanvisning

Käyttöohje

Работна инструкция

GB Operating Instructions

Bedienungsanleitung

Mode d‘emploi

FIN

Technical data/Technische Daten

Power supply /Stromversorgung/Alimentation

électrique /Alimentación de corriente/ Питание

/Alimentazione elettrica /Stroomvoorziening /

Ηλεκτρική τροφοδοσία /Zasilanie elektryczne /

Tápellátás /Napájení /Napájanie /Alimentação

elétrica /Alimentarecucurent /Strömförsörjning

/Virransyöttö / Електрозахранване

3,0 V

2xAAA

Battery /Batterie/ pile /pila / батарея /

batteria/batterijen / μπαταρίες/bateria

/elem /baterie/batéria /pilha /baterie/

batteri /paristo / батерия

Frequenz/Frequenz /fréquences /frecuencia

/частот /frequenza /Frequentie / συχνοτήτων/

Częstotliwość/frekvencia /Frekvence /Frekvencia

/frequências /frecvențe/frekvensband /

Radiotaajuudet / Радиочестотни

77,5 kHz

Temperaturemeasuring range/ Messbereich

Temperatur/ Plage de mesuredelatempérature/

Rango de medición de temperatura/

Диапазон измерения температуры/Campo

di misurazione temperatura/ Meetbereik

temperatuur/ Εύρος μέτρησης θερμοκρασίας/

Zakres pomiaru temperatur/ Hőmérséklet mérési

tartomány/ Rozsah měření teploty/ Rozsah

merania teploty/ Amplitude de medição da

temperatura/ Domeniu măsuraretemperatură/

Mätområde temperatur/ Lämpötilan mittausalue/

Диапазон на измерване на температурата

0°C -50°C

GOperating instruction

1. Controls and Displays

1. Time

2. Alarm time/date

3. Temperature/weekday display/seconds display

4. DCF radio signal

5. -button =switch between the date and alarm time

6. +/DCF button =switch between the seconds display,degrees Celsius and weekday display

7. ALARM ON/OFF SETTINGS button =manual settings (press for approx. 3seconds)

8. SET ALARM TIME =alarm time/alarm mode display (press for approx. 3seconds)

9. SNOOZE LIGHT BUTTON =activates the backlight/interrupts the alarm for approximately

8minutes

10. Battery compartment

2. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specic

hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

3. Package Contents

•radio-controlled alarm clock „Duo“

•2AA battery

•These operating instructions

4. Safety Notes

•The product is intended for private, non-commercial use only.

•Protect the product from dirt, moistureand overheating, and

only use it in adry environment.

•Donot use the product in areas wherethe use of electronic devices is not permitted.

•Donot put the product near interference elds, metal frames, computers, TVs, etc. Electronic

devices and window frames can negatively affect the product’sfunctionality.

•Donot drop the product and do not expose it to any major shocks.

•Donot attempt to service or repair the product yourself.Leave any

and all service work to qualied experts.

•Donot modify the product in any way.Doing so voids the warranty.

•Dispose of packaging material immediately according to locally applicable regulations.

Warning –battery

•Immediately remove and dispose of dead batteries from the product.

•Only use batteries (or rechargeable batteries) that match the specied type.

•Donot mix old and new batteries or batteries of adifferent type or make.

•When inserting batteries, note the correct polarity (+ and -markings) and insert the

batteries accordingly.Failure to do so could result in the batteries leaking or exploding.

•Donot overcharge batteries.

•Keepbatteries out of the reach of children.

•Donot short circuit the batteries/rechargeable batteries and keep them away from

uncoated metal objects.

5. Getting Started

5.1 Inserting the battery

Remove the battery that was already inserted into the clock, remove the protective lm if

necessary as well as the contact interrupter and the re-insert the battery with the correct polarity.

The clock is ready for operation.

5.2 Replacing the battery

•Remove and dispose of any used batteries. Insert the new battery (AAA). Ensurethat the

polarity of the battery corresponds to the symbols in the battery compartment (10).

6. Operation

Note

Hold down the -button (5) or the +/DCF button (6) to select the values faster.

6.1. Automatic date/time setting using the DCF radio signal

•Once you have inserted the batteries, the display is switched on, an acoustic signal sounds

and the alarm clock automatically starts searching for aDCF radio signal. During the search,

the radio symbol ashes. This process can take 2to5minutes.

•When the wireless signal is received, the date and time areautomatically set.

Display Searching for the DCF signal

Display ashing Active

Display steady Successful -signal reception

Not displayed Inactive –nosignal reception

Note –Time settings

•If,during initial setup of the device, no DCF radio signal is received within the rst few

minutes, the search is aborted. The radio icon (4) will go out.

•If thereare reception problems, we recommend leaving the clock to sit overnight, since

interference is generally less at night.

•In the meantime, you can start amanual search for the DCF radio signal at another location

or you can manually set the time and date.

•The clock automatically continues to search for the DCF signal on adaily basis (at 1amand

5am). If the signal is received successfully,the manually set time and date areoverwritten.

•Ifthe station still does not receive asignal, press the +/DCF button (6) for approx. 3seconds

to start the manual search for the DCF signal. The radio symbol starts to ash.

•Press the +/DCF button (6) to cancel the search.

6.2. Manually setting the date/time

Press and hold the ALARM ON/OFF SETTINGS button (7) for approx. 3seconds until the

weekday language blinks.

Set the following information in the order listed:

•Language, 12 or 24-hour format, year,month, day,hours, minutes, time zone (+12/-12).

•Toselect the individual values, press the +/DCF button (6) or the –button (5) and conrm

your selection by pressing the ALARM ON/OFF SETTINGS button (7) to apply the displayed

setting values and move on.

Note –Day of the week

Youcan choose from German (GE), English (EN), Dutch (DU), Italian (IT)orFrench (FR)for

the weekday display.Press the +/DCF button

(6) several times until the weekday display appears.

Note –Selecting 12 or 24-hour format

Use the +/DCF button (6) or –button (5) to switch between the

12 and 24-hour formats. With the 12-hour format, “PM” (12:00

to 0:00) is displayed to the left of the time.

Note –Time zone

•The DCF signal can be received over long distances, but always transmits the current

Central European Time in Germany.Make sureyou account for the time difference in

countries in other time zones.

•Ifyou areinMoscow,the time is 3hours later than in Germany.This means that you

should set +3 for the time zone. The clock then sets the time automatically to 3hours

ahead after receiving the DCF signal or according to the manually set time.

•Brieypress the ALARM ON/OFF SETTINGS button (7) to switch between the time at the

location and the time in the set timezone.

Youcan identify that the time for the set timezone is displayed by

the ZONE symbol on the left.

6.3. Alarm clock

Note –Alarm clock

The radio-controlled alarm clock has two congurable alarm times, aweekday alarm (1 to 5)

and aweekend alarm (6 to 7). The date is displayed in the top right display eld (2) immediately

after you insert the batteries. To go to the alarm time display,press the –button (5).

Setting the alarm time

•Press and hold the SET ALARM TIME button (8) for approx. 3seconds to go to alarm

mode. The display for the weekday alarm (1 to 5=MOtoFR) and the hours for the weekday

alarm begin to ash.

•Press the +/DCF button (6) or the –button (5) to select the hours for the alarm time, and

conrm your selection by pressing the SET ALARM TIME button (8). The minutes display

begins to ash.

•Repeat the process to set the minutes for the alarm time.

•Ifyou press the SET ALARM TIME button (8), the display for the weekend alarm (6 to 7=

SA to SU) and the hours for the weekend alarm begin to ash.

•Repeat the process used for the weekday alarm to set the alarm time.

•This alarm is automatically activated by setting the alarm time indicated by the bell symbol.

•The set alarm time for weekdays and the weekend can be accessed by pressing the SET

ALARM TIME button (8). Press it once for the weekday alarm (1 to 5appears), twice for the

weekend alarm (6 to 7appears) and once moretoreturn to theprevious display.

Activating/deactivating the alarm clock

•Press the ALARM ON/OFF SETTINGS-button (7) repeatedly to activate/deactivate the

alarm time.

•Press the SET ALARM TIME button (8) twice and then press the ALARM ON/OFF

SETTINGS button (7) to activate or deactivate

the weekend alarm. If the alarm is activated, the corresponding

symbol is displayed.

Stopping the alarm clock/snooze function

•Ifthe alarm is triggered, an alarm signal will sound for 5minutes. The frequency of the alarm

signal increases the longer the alarm continues. The alarm switches off automatically after 5

minutes. Alternatively,itcan be stopped by pressing the SET ALARM TIME button (7), +/

DCF button (6), -button (5) or ALARM ON/OFF SETTINGS button (7).

Note –Snooze function

•While the alarm signal is sounding, press the SNOOZE/LIGHT button (12) to activate the

snooze function. begins to ash on the display.The alarm signal will be stopped for 8

minutes, after which it will sound again.

6.4. Backlight

•Ifyou press the LIGHT/SNOOZE button (9), the display lights up for approx. 3seconds.

7. Temperature indicator

Press the +/DCF button (6) several times until the temperatureappears. Press the –button (5)

for approx. 5seconds to switch between Celsius and Fahrenheit.

8. Care and Maintenance

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning

agents. Make surethat water does not get into the product.

9. Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from

improper installation/mounting, improper use of the product or from failuretoobserve the

operating instructions and/or safety notes.

10. Declaration of Conformity

Hereby,Hama GmbH &CoKG declares that the radio equipment type [00176936]

is in compliance with Directive 2014/53/EU.The full text of the EU declaration of

conformity is available at the following internet address:

www.hama.com->00176936-> Downloads.

Frequency band(s) 77.5 kHz

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Despertador de Hama

Manuales populares de Despertador de otras marcas

Steren

Steren CLK-210 Manual de usuario

COP-USA

COP-USA ALCDVR32-SL Manual de usuario

Philips

Philips HF3505/70 Manual técnico

Casio

Casio PQ-70 Manual de usuario

iHome

iHome IA63 Manual de usuario

Coopers

Coopers 9765 Manual de usuario

ANJANK

ANJANK AC-190 Guía

TFA

TFA 98.1075 Manual de usuario

Sharper Image

Sharper Image 204050 Manual de usuario

Lumie

Lumie Zest Manual de usuario

Dexford

Dexford RCT200 Manual de usuario

Philips

Philips AJL303/37B Manual de usuario

RST

RST Q754 Manual de usuario

iHome

iHome iKT50 Manual de usuario

Sony

Sony dash HID-B7 Manual de usuario

SVINZ

SVINZ SCC009 Manual de usuario

Clas Ohlson

Clas Ohlson 918863 Manual de usuario

IKEA

IKEA FNURRA Manual de usuario