Hall Research Technologies SC-VHD-HDMI Manual de usuario

SC-VHD-HDMI

VGA / YPbPr to HDMI™ Converter with Audio

Convert VGA video from PC or YPbPr from DVD to HDMI for display on

any digital HDTV with HDMI or DVI input

Order toll-free in the U.S. 800-959-6439

FREE technical support, Call 714-641-6607 or fax 714-641-6698

Mail order: Hall Research, 1163 Warner Ave. Tustin, CA 92780

Web site: www.hallresearch.com E-mail: info@hallresearch.com

CUSTOMER

SUPPORT

INFORMATION

UMA1170 Rev. A

PC (VGA) or YPbPr to HDMI™ Converter/Scaler

TRADEMARKS USED IN THIS MANUAL

Hall Research and its logo are trademarks of Hall

Research.

Any other trademarks mentioned in this manual are

acknowledged as the property of the trademark owners.

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used properly, that is,

in strict accordance with the manufacturer’s instructions, may

cause interference to radio communication. It has been

designed to comply with the limits for a Class A computing

device in accordance with the specifications in Subpart B of Part

15 of FCC rules, which are intended to provide reasonable

protection against such interference when the equipment is

operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in

which case the user at their own expense will be required to take

whatever measures may be necessary to correct the

interference.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

Model SC-VHD-HDMI

Contents

1. Introduction.......................................................... 3

1.1 General................................................................ 3

1.2 Features .............................................................. 3

2. Installation............................................................ 4

2.1 Connections......................................................... 4

2.2 Connection Block Diagram .................................. 4

2.3 Package Contents ............................................... 4

3. Configuration & Operation.................................. 4

3.1 Input and Output.................................................. 4

3.2 OSD Menu........................................................... 5

3.3 Setting the Output Resolution.............................. 6

4. Troubleshooting .................................................. 7

4.1 Contacting Hall Research .................................... 7

4.2 Shipping and Packaging ...................................... 7

5. Specifications ...................................................... 8

6. Supported Input and Output Resolutions ......... 8

PC (VGA) or YPbPr to HDMI™ Converter/Scaler

1. Introduction

1.1 General

Thank you for purchasing Hall Research’s Model SC-VHD-

HDMI™. This unit can convert and scale either Component

(YPbPr) or PC Analog video with audio into an HDMI™ or DVI

compatible signal. The unit takes advantage of the HDMI™

cable’s ability to embed the digital audio in the same cable with

video. For convenience, both line level analog and optical digital

audio outputs are also provided.

The SC-VHD-HDMI has the ability to output a wide range of

resolutions and refresh rates regardless of the input timing and

resolution. The output resolution setting can automatically match

the native resolution of display the unit is connected to or be

specified by the user.

The video processor combines the functions of a video scaler,

scan-converter, and format transformer. The SC-VHD-HDMI

also includes a horizontal mirroring feature, which is useful for

Teleprompters and rear projection systems. The unit encodes

the audio input signal from TOSLink (Optical) or Analog (L/R) to

both digital and analog formats and outputs it on HDMI™ along

with video. For convenience, the unit features mounting

brackets.

The SC-VHD-HDMI features an OSD menu for configuration,

picture setup, system information and many other advanced

options.

1.2 Features

•HDMI™, HDCP, and DVI Compliant

•Any PC or HDTV video signal can be scaled up or

scaled down to any other PC or HDTV resolution

•State-of-the-art video scaling for real-time frame rate

capture & conversion

•Signal format conversion between RGBHV and YPbPr.

•Automatically detects input mode and timing

parameters.

•OSD adjustment of contrast, brightness, color, size,

sampling clock, phase, position, audio source and delay

•Horizontal mirroring (X-axis flip)

•Supports stereo LPCM analog/digital audio input and

stereo LPCM analog/digital audio output

Model SC-VHD-HDMI

Figure 1 – Input View Figure 2 – Output View

2. Installation

2.1 Connections

The SC-VHD-HDMI™ accepts either analog PC or component

YPbPr inputs. The output is HDMI™, but can also connect to

DVI LCD’s using a HDMI-to-DVI Cable (HR part number CHDMI-DVI-

xM).

For YPbPr sources, use a 3-RCA to DB15 cable (included).

2.2 Connection Block Diagram

2.3 Package Contents

(1) Model SC-VHD-HDMI

(1) 5 vDC Universal Power Supply

(1) HD15 to 3-RCA Component video input cable

(1) Operations Manual

3. Configuration & Operation

3.1 Input and Output

PC (VGA) or YPbPr to HDMI™ Converter/Scaler

3.2 OSD Menu

Pressing the Menu button will bring up the OSD menu controls

on the screen. Use the up and down arrows to your desired item,

then press MENU to select and enter into sub menu. Select

EXIT from a submenu to go back to the main menu or from the

main menu to exit the OSD.

Top Menu Sub-Menu Value

CONTRAST 0 to 100% (DEFAULT=50)

BRIGHTNESS 0 to 100% (DEFAULT=43)

PHASE 0 to 100% (DEFAULT=0)

CLOCK 0 to 100% (DEFAULT=50)

H-POSITION 0 to 100% (DEFAULT=50)

FINETUNE

V-POSITION 0 to 100% (DEFAULT=50)

RED 0 to 100% (DEFAULT=47)

GREEN 0 to 100% (DEFAULT=47)

BLUE 0 to 100% (DEFAULT=47)

COLOR

EXIT

SIZE

FULL, OVERSCAN, UNDERSCAN, LETTERBOX, PANSCAN

(DEFAULT=FULL)

OUTPUT

NATIVE* , 640x480, 800x600, 1024x768, 1280x800,

1440x900, 1280x1024, 1400x1050, 1600x1200,

1680x1050, 1920x1200,

480i, 480p, 576i, 576p, 720p50, 720p60,

1080i50, 1080i60, 1080p50, 1080p60 (DEFAULT=NATIVE)

SOURCE L/R or OPTICAL

DELAY OFF, 40 MS, 110MS or 150MS

SOUND ON or MUTE

AUDIO

EXIT

H-POSITION 0 to 100% (DEFAULT=10)

V-POSITION 0 to 100% (DEFAULT=90)

TIMER 0 to 100% (DEFAULT=10)

OSD

BACKGROUND 0 to 100% (DEFAULT=63)

INFORMATION

SOURCE (Input Interface)

INPUT ( Input Resolution)

OUTPUT (Output Resolution)

VERSION (Firmware Version)

FACTORY RESET Reset unit parameters to default state

MIRROR OFF or ON (DEFAULT = OFF)

EXIT EXIT OSD

* The NATIVE output setting causes the scaler output to be the best

matched to the native resolution of the connected display.

Model SC-VHD-HDMI

3.3 Setting the Output Resolution

3.3.1 Obtaining an image on the screen

As shipped from the factory, or after a factory default reset, the

unit output resolution setting should be “NATIVE”. This means

that upon power up the device will read the EDID of your display

and output a compatible resolution resulting in a picture.

However, if the output setting is not at “NATIVE”, or if the unit

cannot ascertain the EDID of the display, then you may not get a

picture and since most settings are done by means of an on-

screen display (OSD), it is necessary to get an image on the

display first.

For this purpose, you can use one of two preset button

combinations to set a resolution that your display supports. Two

options are available (depending on the display device):

1. If the display is HDTV compatible (with an HDMI connection);

then a resolution of 480p should result in an image.

2. If the display is PC compatible (DVI), then XGA (1024x768)

should result an image.

Once you have an image, you can call up the OSD menu to

make further changes if necessary.

At any time, pressing the UP ARROW Ïand MENU button

together will change the output resolution to 1024x768 @ 60 Hz.

Pressing the MENU and DOWN ARROW Ðtogether will change

the output resolution to 480P @ 60 Hz.

3.3.2 Recalling Factory Defaults

Factory defaults may be recalled via (2) methods:

1. Press the MENU button to display the OSD. Using the ÐÏ

arrows buttons, move to highlight the ‘FACTORY RESET’

option and press the MENU button. The unit will reset all

parameters to the factory defaults. The output resolution will

be set at ‘NATIVE’, which should result in a picture being

displayed. The actual resolution of the display monitor in

this mode is dependant on the monitor and not the SC-VHD-

HDMI.

2. Unplug the DC jack from the unit. Press and hold the menu

button and simultaneously plug the DC jack. This causes all

parameters to revert to factory defaults.

PC (VGA) or YPbPr to HDMI™ Converter/Scaler

3.3.3 Setting the output resolution

Press the MENU button to open the OSD and use the arrow

buttons (ÏÐ)to select the OUTPUT option. Press the MENU

button.

Use arrows to scroll thru the available resolutions listed. See

Section 6 below for a list of all available resolutions.

The default output resolution after a factory reset of the SC-

VHD-HDMI is “Native”.

If connected to an HDTV via HDMI input, then use the highest

resolution your display supports from among 480i/p, 720p50/60

or 1080i/p. If a DVI LCD is used, you have a wide range of PC

resolutions available (see section 6 for a complete listing).

4. Troubleshooting

There are no field serviceable parts or circuits in the device. If

you think the device is malfunctioning (or you have no picture

output), please try to use the methods described in Section 3.3

to obtain a picture first.

4.1 Contacting Hall Research

If you determine that your SC-VHD-HDMI is malfunctioning, do

not attempt to repair the unit instead, contact Hall Research

Technical Support at 714-641-6607.

Before you do, make a record of the history of the problem.

We will be able to provide more efficient and accurate

assistance if you have a complete description.

4.2 Shipping and Packaging

If you need to transport or ship your unit:

•Package it carefully. We recommend that you use the

original container.

•Before you ship the units back to Hall Research for repair or

return, contact us to get a Return Authorization (RMA)

number.

Model SC-VHD-HDMI

5. Specifications

Input ports (1) HD15 (supports both VGA or YPbPr)

(1) 3.5mm AUDIO, (1) OPTICAL AUDIO

Output ports (1) HDMI™

(1) 3.5mm AUDIO, (1) OPTICAL AUDIO

Power Supply 5V/2.6A DC (CE/FCC/UL certified)

Dimensions 4” (W) x 6.5” (D) x 1” (H)

(101.6mm) x (165mm) x (25.4mm)

Weight 0.75 Lbs (340g)

Chassis Aluminum

Operating Temp 32 to 122 DegF (0 to 50 DegC)

6. Supported Input and Output Resolutions

Input Resolutions Supported Output Resolutions

640x480 (VGA) 60/72/75/85 Hz 640x480 (VGA) 60 Hz

800x600 (SVGA) 56/60/72/75/85 Hz 800x600 (SVGA) 60 Hz

1024x768 (XGA) 60/70/75/85 Hz 1024x768 (XGA) 60 Hz

1280x800 (WXGA) 60 Hz 1280x800 (WXGA) 60 Hz

1440x900 (WXGA+) 60 Hz 1440x900 (WXGA+) 60 Hz

1280x1024 (SXGA) 60/75/85 Hz 1280x1024 (SXGA) 60 Hz

1400x1050 (SXGA+) 60 Hz 1400x1050 (SXGA+) 60 Hz

1600x1200 (UXGA) 60 Hz 1600x1200 (UXGA) 60 Hz

1680x1050 (WSXGA) 60 Hz 1680x1050 (WSXGA) 60 Hz

1920x1200 (WUXGA) 60 Hz 1920x1200 (WUXGA) 60 Hz

480I 60 Hz 480I 60 Hz

480P 60 Hz 480P 60 Hz

576I 50 Hz 576I 50 Hz

576P 50 HZ 576P 50 HZ

720p 50/60 Hz 720p 50/60 Hz

1080i 50/60 Hz 1080i 50/60 Hz

1080p 50/60 Hz 1080p 50/60 Hz

Tabla de contenidos

Otros manuales de Convertidor de medios de Hall Research Technologies

Hall Research Technologies

Hall Research Technologies HHD264 Manual de usuario

Hall Research Technologies

Hall Research Technologies UV232-2 Manual de usuario

Hall Research Technologies

Hall Research Technologies CC-101 Manual de usuario

Hall Research Technologies

Hall Research Technologies VHD-180 Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-HD2SDI Manual de usuario

Hall Research Technologies

Hall Research Technologies VHD-PCTV Manual de usuario

Hall Research Technologies

Hall Research Technologies EX-HDU-WP Manual de usuario

Hall Research Technologies

Hall Research Technologies VHD-HD2CV Manual de usuario

Hall Research Technologies

Hall Research Technologies SP-HD-8A Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-HD-2B Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-1080H Manual de usuario

Hall Research Technologies

Hall Research Technologies HRT-EMX-HD-AUD Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-VGA-2B Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-SDI2HD Manual de usuario

Hall Research Technologies

Hall Research Technologies TVB-400 Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-HDMI-2A Manual de usuario

Hall Research Technologies

Hall Research Technologies SP-HD-4C Manual de usuario

Hall Research Technologies

Hall Research Technologies SP-HD-4A Manual de usuario

Hall Research Technologies

Hall Research Technologies SC-VD-2 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario