Hakko Electronics FR-410 Manual de usuario

Available in:

Desoldering tool with built-in vacuumpump

140 W high power enables perfect desoldering on multi-

layer PWB

New type nozzle can fit onto micro land patterns and

narrow space

Separate nozzle and heater ensure running cost

advantage for you

Desoldering / Rework/Desoldering tool

140 W high powers enable perfect desoldering for the components on multi-layer PWB

Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy

to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.

A wide selection of nozzle, with the addition of new types, is available for a variety of

desoldering works.

Applicable to even micro lands, components in a narrow space or flat type terminals on the PWB of

downsized devices like mobile phone.

Secure desoldering, valve function that suctions with high pressure

Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve

complete desoldering.

Reduction of solder clogging

・Improvement in heating core

Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter

pipe and avoid solder clogging.

・Featuring ACF (Anti Clogging Function)

ACF (Anti Clogging Function) ensures suctioned solder be carried to filter pipe by keeping the pump

running for a certain period of time (1 to 5 seconds) automatically after releasing trigger.

Improvement in maintainability

・Easy nozzle replacement

The dedicated wrench allows safe, easy and smooth nozzle replacement.

・Easy heater replacement

Easy heater replacement by removing 3 screws on the part of heating core.

・Larger filer and more transparency

Filter size has been increased to protect the pump fromcontaminants, and transparent filter cover allows

quick visual check of the filter condition.

・Tool box

FR-410 comes with a tool box that contains of maintenance tools to keep nozzles and heater in a good

condition.

Featuring a large LCD display

Very easy to see temperature on the large LCD display

Vacuumindicator to check clogging

Otros manuales para FR-410

3

Tabla de contenidos

Otros manuales de Equipo de prueba de Hakko Electronics

Hakko Electronics

Hakko Electronics FG101B-03 Manual de usuario

Hakko Electronics

Hakko Electronics 192 Manual de usuario

Hakko Electronics

Hakko Electronics FG-460 Manual de usuario

Hakko Electronics

Hakko Electronics FR-811 Manual de usuario

Hakko Electronics

Hakko Electronics FG101-16 Manual de usuario

Hakko Electronics

Hakko Electronics FG-101B Manual de usuario

Hakko Electronics

Hakko Electronics FG-465 Manual de usuario

Hakko Electronics

Hakko Electronics FG-101 Manual de usuario

Hakko Electronics

Hakko Electronics FG-470 Manual de usuario

Hakko Electronics

Hakko Electronics FG-470 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario