Haier D34FV6 Manual de usuario
Side AV terminal
S-video input terminal: Special video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track R
AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track R
AV2 input terminals MONITOR : VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
Av1 input terminals MONITOR :VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
DVD component terminals:
Interleaved signal Y CbCrAUDIO L/MONO Track L/MONO ,R Track R
Progressive signal YPbPrAUDIO L/MONO Track L/MONO ,R Track R
HDTV input terminals: YPbPrterminal AUDIO L/MONO Track L/MONO ,R Track R
D29FV6 , D34FV6 Model
VGA input terminal
D29FV6 Model
Position of Buttons and Plug-ins
Front and Side panel
MENU
Volume up/ down
Channel position up/down
TV/Video
(input selector
Infrared receiver
Power indicator
Power switch
Back panel
D34FV6 Model
Antenna input
AV output terminals
AV2 input terminals
AV1 input terminals
DVD component terminals
HDTV input terminals
S-video input terminal
VGA input terminal Antenna input
AV output terminals
AV2 input terminals
AV1 input terminals
DVD component terminals
HDTV input terminals
S-video input terminal
1.When the S-video terminal and the Video 1 terminals are connected
at the same time, the S-video terminal is preferential.
2.When the side AV is connected, please select the Video 2 terminal.
DVI IN
DVI input terminal
DVI IN
DVI input terminal
CH+
CH-
VOL- VOL+
MENU
SCAN
SWAP
18
B/G
144MHz
NORMAL
8
B/G
144MHz
NORMAL
18
B/G
144MHz
NORMAL
Program swap
1. Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2. If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3. If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1. Press the SCAN button to
scan through all the memorized
TV channels. The TV set screen
displays 12 pictures at the same
time. Press the S.STD button to
scan next page, and press the
P.STD to scan last page.
2.Press the CH+/- buttons and
VOL-/+ buttons to select the
program that you desired, and
press the MENU button to
confirm.
Watching TV Programs (continued)
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of the programs in memory
with (There are 12 pictures display on the screen at the same time)."OFF" skip status
Program swap and auto scan functions
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
TUN.
Search 001
125.00MHz
CALL
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
TUNE
Tuning (Continued)
Search
Search
1
B/G
144MHz
NORMAL
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number.
2. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
. Press the CH+/- buttons to
move the indicator to "Search". Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
TUN.
4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue
to search until it has searched the TV
signal you need.
Note:
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL button once.
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
SOUND
SOUND
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to "Sound Effect".
. Press the VOL+ button to
sub-menu.
. Press the CH+/- buttons to select
the desired option, then the sound effect of the TV set turn to the
sound effect selected. Press MENU button to exit the sub-menu.
Convenient Picture and Sound Controls (Continued)
Surround effect chip has been employed to form a vivid and real space surroundsound
effect.
Sound Effect, Surround and Mute functions
SOU.
Treble 50
Bass 50
Balance 50
Sound Effect
Surround ON
Stereo
V.SRS
Mono
Sound Effect function
There are Stereo, V.SRS and MONO sound effect for the
TV set. You may select the desired option.
SOU.
Treble 50
Bass 50
Balance 50
Sound Effect
Surround ON
Surround Function
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Surround ".
. Press the VOL-/+ buttons to turn
the " Surround " function ON.
How to use the Mute function
When you want to listen to the sound nearby, or when you are
answering the telephone, or talking with your friends, you may use
the mute function.
1. Press the MUTE button once, a
sign of mute will appear on the
screen, and then the sound will be
eliminated to half; press the MUTE
button again the sound will be
eliminated completely .
2. Press thevolume button or
press the MUTEbutton again,
and the soundwill be recovered.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Receptor de TV de Haier
Haier
Haier LET26C430 Manual de usuario
Haier
Haier LE46D10F Manual de usuario
Haier
Haier L3D42D25N Manual de usuario
Haier
Haier LEY19T1000H Manual de usuario
Haier
Haier LT15T1WW Manual de usuario
Haier
Haier 29F9K Manual de usuario
Haier
Haier 21NT1 Manual de usuario
Haier
Haier L1509A-A Manual de usuario
Haier
Haier 21F9D Manual de usuario
Haier
Haier 15F6B Manual de usuario
Haier
Haier LET19C600F Manual de usuario
Haier
Haier LET32T1000HFM Manual de usuario
Haier
Haier WL19T1 Manual de usuario
Haier
Haier LET19C430 Manual de usuario
Haier
Haier 21FA10-AM Manual de usuario
Haier
Haier 1509-A Manual de usuario
Haier
Haier 21F3A Manual de usuario
Haier
Haier D29FA9 Manual de usuario
Haier
Haier L22A11W Manual de usuario
Haier
Haier 21F6B-T Manual de usuario
