4
Artificial stone kit - ASKJA – Parts list
Article No. No. Quantity Designation Type Material
0621350000100 1 1 Base plate Artificial stone Artificial stone
0621350000200 2 1 Base element lateral Artificial stone Artificial stone
0621350000300 3 1 Base element front Artificial stone Artificial stone
0621350000400 4 1 Lateral cover right Artificial stone Artificial stone
0621350000500 5 1 Lateral cover left Artificial stone Artificial stone
0621350000600 6 1 Support side parts Steel Steel
0621350010100 7 1 Base plate great black Artificial stone
0621350010200 8 1 Base plate front black Artificial stone
0621350010300 9 1 Base plate small black Artificial stone
0621350010400 10 1 Side parts right black Artificial stone
0621350010500 11 1 Side parts left black Artificial stone
0621350030100 7 1 Base plate great cotto Artificial stone
0621350030200 8 1 Base plate front cotto Artificial stone
0621350030300 9 1 Base plate small cotto Artificial stone
0621350030400 10 1 Side parts right cotto Artificial stone
0621350030500 11 1 Side parts left cotto Artificial stone
0621800105000 12 1 Adhesive
0621800105050 13 1 Acryl
Assembly instructions artificial stone kit ASKJA
Note: Ensure that the insert is accurately positioned prior to the assembly. Always ensure that the
parts are assembled horizontally and plumb.
1. Assemble the fireplace kit in the dry condition. Check to see whether the elements are plumb
and level. Mark the correct position using the pencil.
After this, remove all elements and assemble one by one using the tile adhesive.
2. Mix the supplied adhesive (safety adhesive) with water until a consistency similar to toothpaste
is obtained. Bond all elements together and to the wall. The bonding surface should be clean
and slightly moistened to achieve optimum adhesive strength. Remove excess adhesive with
the spatula and a moist cloth.
3. Once the kit has been finish painted, finally glue the plates to the bases.
