H2O Audio SV-iP4G Manual de usuario
Step 1: Use a small Phillips screwdriver in a counterclockwise
direction to remove the three (3) screws from the rail.
Be very careful not to damage the T-seal with the screwdriver.
Step 3: Repeat Steps 1 and 2 for the other rail.
Rail Removal for 30Gb or 40Gb iPod®
SV-iP4G for 4TH Generation iPod® with Click Wheel
- Leave rails in place for the 20Gb iPod®
- Remove rails for the 40Gb iPod®
Step 2: Once all the screws are removed, gently lift the rail out of
the housing. Do not leave any screws in the housing as they may
interfere with the accurate closure of the housing.
iPod is a Registered Trademark of Apple Computer, Inc.
SV-iP3G for 3RD Generation iPod® with Touch Wheel
- Leave rails in place for the 10Gb/15Gb/20Gb iPod
- Remove rails for the 30Gb and 40Gb iPod®
RailRemoval_0305
Otros manuales de Estuche de transporte de H2O Audio
H2O Audio
H2O Audio Capture iN5-70 Manual de usuario
H2O Audio
H2O Audio Waterproof Armband AMPHIBX Manual de usuario
H2O Audio
H2O Audio Amphibx WSB-5A1 Manual de usuario
H2O Audio
H2O Audio Armor Series iFR-5A3 Manual de usuario
H2O Audio
H2O Audio Oceanic DV Series D2-1C1 Manual del operador
H2O Audio
H2O Audio AMPHIBX WA-E Manual de usuario
H2O Audio
H2O Audio SV-iMini S2-1A2 Manual de usuario
