H.VIEW H.264 Manual de usuario
2
Contents
Overview.........................................................................................................................3
Installation..................................................................................................................... 4
Log in & Log out.......................................................................................................... 7
Hard drive setup...........................................................................................................8
Motion detect................................................................................................................ 9
Privacy Mask...............................................................................................................10
Email setup..................................................................................................................10
Network Status........................................................................................................... 11
Record Setting............................................................................................................12
Video Playback...........................................................................................................14
Web viewer.................................................................................................................. 15
Mobile phone / IPAD viewer....................................................................................16
CMS Viewer................................................................................................................. 18
3
Overview
Before installation
Remove the power supply module before proceeding.
Check the input voltage to the power supply module before connecting it.
Keep the product away from humidity.
Ensure that all devices connected to the product should be properly earth-grounded.
Rear Panel
4channels
8 channels
Select one from VGA/HDMI before outputting the video
4
Since the cable quality may affect directly to the video quality depending on the distance
between the camera and DVR
Installation
Connecting to an external device
This product supports 1080p 60 Hz HDMI monitors and regular monitors that support DVI and VGA
inputs. Connect an HDMI cable to the port on the product ‘s rear bottom,Or use VGA cable to
connect the product with a VGA monitor.
Once the product is set for NTSC or PAL output, connect cameras of the corresponding
Video standard for proper operations.
Power Connection
For stable operation of the product, it is recommended to use the provided adapter.
Arrange up the cables and be careful not to peel off the cable coating.
Camera and DVR recorder Connection
2Cameras system
5
4cameras system (Include 8 Channels and 4 channels)
There is Label on Video cable ,”Only for DVR” & “Only for Camera”,please choose
right port when you connect cable
1-4 Splitter be used to power camera, connect one port of 30M Video cable with 1-4
Splitter
There are 2 adapter included in package,One is used to power DVR recorder ,one is
used to connect with 1-4 splitter to power 4 cameras you received.
You must connect Internet cable with DVR,then you can remotely view via Mobile
6
Phone and PC.
8channels & 8 cameras system
If you bought 8 channels & 8 cameras system ,you will receive :
* 1 x 8CH AHD DVR
* 8 x CCTV security Cameras
* 8 x 60ft Power Video Cable
* 2 x 1-4 splitter cable
* 3 x 12V DC Power Supply
* 1 x Remote Control
* 1 x Mouse
Connect the RJ45 port in the rear panel to the router
You can connect DVR to a PC or mobile device in the same remote network and
control or manipulate it on the monitor of the PC or mobile device
All connections
7
Log in & Log out
Log in
To manipulate or access the menus of DVR, you should have logged in.
1. When the system starts, the log in
screen appears
2. Select a user and provide the
password.The default User Name is
"admin" ,password is “blank”(leave it null)
3.Click <OK>. You will access the system
Log out
To prevent unauthorized access, it is recommended to log out when you leave the screen.
1.In the monitoring screen, click
<MENU> in the bottom left corner of the
screen to <LOG OUT>.
2.While logged out, Search / Backup /
System Settings/ Record Settings / Exit
menus are restricted to use.
8
General Setup
You can set time zone,Date and language storage in this page.
1.Time zone : specify the GMT standard time for your local area.
2.System time: Set the current time and date
3.Language: specify the language of your local area
4.Storage Full: Set<Overwrite> means system will continue recording video and will
cover the former data when hard drive is full
5.Auto Logout:If you set “0” which means you don’t set up any standby time
Hard drive setup
You can set to delete the recording automatically and set the overwrite options, and
you can also format the HDD recording data.
1.From--[Main menu]--[Advanced]--[Storage]
9
2.Choose <Format Storage> before you using hard drive
Before setting hard drive you need confirm if the hard drive has been connected
successfully.
System will automatically overwritten the former data when hard drive is full ,if you
need change model of recording ,please check 【General setting】
Motion detect
Set the motion sensor of the camera so that it can detect a motion event.
1.From <Main Menu> - <Alarm> - <Motion
Detect>
2.Use the mouse to specify the use of each
option item
>Channel : Choose channel you want set motion
detect
>Enable ：turn on the motion detect
>Sensitivity: Set the sensitivity level of the
motion sensor
>Region : Specify the motion detection area.
10
>MD interval : Specify the interval of motion detect
>Record channel:Specify the channel which will record when motion be detected
>Choose suitable push approach:Show message,Send email,Buzzer,Write Log,FTP
upload,Mobile reported
The motion detection sensitivity may differ depending on the characteristics of the connected
camera or the installation environment.
Motion area setup
From the motion detect window,click<Region>in the right corner to display the area setup screen
Click <Region> to move the motion detect area setup screen
Press and hold the left mouse button and
drag to select /deselect your desired area
Right-click any area to display the popup
window as in the right picture.
While the popup window is
displayed,Left-click area to mask color the
area you want set motion detect,area with no
color is where you set.
Click any area back to interface page.
Privacy Mask
You can edit privacy mask settings and privacy masking areas for video from each camera.
Enabling Privacy Mask
From <Main menu> -- <system> -- <display> ---< region cover>
Use the mouse to set channels enabled
Click Set,you will see a black box in the monitor screen,drag box to select your desired
area..
Right-click mouse ,windows will back to previous page
To apply the change,click<OK> in the bottom of the screen
When done, click <CLOSE> in the lower screen to return to the previous menu.
Recorder
Email setup
Tabla de contenidos
