GYROZEN 1848R Manual de usuario

1848R

Max. RPM/RCF Fixed-angle 18,000 rpm / 30,536 xg

Swing-out 13,000 rpm / 16,438 xg, 5,750 rpm / 3,050 xg

Max. Capacity Fixed-angle 8 x 50 mL conical, 48 x 1.5/2.0 mL

Wind shield 24 x 2.0 mL, 4 MTPs

Temp. range -10℃ ~ 40℃

Time control Pulse, timed <10 hr or continuous (00:00)

ACC/DEC 9 (Max 9) / 10 (Natural 0)

Quick Guide

Display & Control

End Alarm

Sound volume

(level : 0 ~ 10,

0 : silent)

TEMP

Program SAVE / CALL

Touch once : CALL / Touch twice : SAVE (up to 100)

Setting ACC / DEC

Setting Time

Display

Status of RPM, RCF,

Time, Temperature,

ACC, DEC, Running,

Lid open/close

Setting Speed

Touch once : RPM

Touch twice : RCF

Operation

Setting Run Parameters

[RPM / RCF / Time / Temp. / ACC / DEC / Program save, call]

- Touch a parameter to be changed.

- Set the desired values by touching the numeric keys. - Press the Enter.

Pulse

Set the desired run speed.

- Touch the Start/Stop key more than 3 sec.

Start /

Stop

Lid Open

Temp / Fast Cool

Touch for more than 2 seconds to reach rapid refrigeration up to setting temp.

Pulse

At Set Speed

On : Counts the time at set speed / Off : Counts the time from starting

Touch more than 2 sec. : Repeat time of end alarm (time : 0 ~ 99, 0 : silent)

Key Lock

/ UnLock

Wait for the rotor to stop before activating

emergengy. Remove the Emergency cap on the

right side of the device. Insert the wrench into

the hole and turn it counter clockwise.

4. Emergency lid open

Precautions for Use

Common Error Codes

6. Keep the chamber dry

5. Lubrication

1. Level the device

Check the instru-

ment level by using

the bubble leveler.

Clean the centrifuge chamber and rotor with a cloth dampened in

mild detergent then dry completely. Keep the chamber dry and the lid

open when not in use.

Whenever there is stiff sensation, use the provided

lubricant to lubricate the bucket grooves, swing-

bucket rotor pivots and the angle rotor thread

If you continue to get below error

messages, contact technical support

team. For other error codes, refer to

the operating manual supplied with

the device.

Error code

Possible Causes

Actions

Error8 Imbalance error Check weight-balances of samples.

Error9 Rotor ID or RPM sensor error Check the rotor is firmly tightened.

Error12 Temperature sensor error Wipe the temperature sensor with a soft cloth.

(Temperature sensor is on the bottom of the chamber.)

Error16 Compressor temperature sensor error Leave a safety clearance of 30 cm around the device during operation and check

compressor fan is working properly.

Empty the condensate

regularly by removing the

drain cap on the left side of

the device.

7. Empty the condensate

2. Balance the rotor Load tubes symmetrically with identical weight.

Correct arrangement for Swing-out rotor Correct arrangement for Angle rotor

3. Tighten the lid with

the rotor

Fixed angle rotors must

always be centrifuged

with the rotor lid.

Grease (Lubricant)

Download corresponding user manual from www.gyrozen.com Doc.No. : UM-1848R(E)(Rev.0)

Order & Inquiry : +82-2-3452-7736ㅣinf[email protected]

Technical Support : +82-2-3452-8966 ㅣ [email protected]ㅣwww.gyrozen.com

Otros manuales para 1848R

Otros manuales de Equipo de laboratorio de GYROZEN

GYROZEN

GYROZEN 1248R Manual de usuario

GYROZEN

GYROZEN 1696R Manual de usuario

GYROZEN

GYROZEN 1580 Manual de usuario

GYROZEN

GYROZEN 406 Manual de usuario

GYROZEN

GYROZEN 1524 Manual de usuario

GYROZEN

GYROZEN MD406 Manual de usuario

GYROZEN

GYROZEN 1096R Manual de usuario

GYROZEN

GYROZEN 1580R Manual de usuario

GYROZEN

GYROZEN 1096R Manual de usuario

GYROZEN

GYROZEN 1730R Manual de usuario

GYROZEN

GYROZEN 416 Manual de usuario

GYROZEN

GYROZEN 624R Manual de usuario

GYROZEN

GYROZEN 1580 Manual de usuario

GYROZEN

GYROZEN 1236R Manual de usuario

GYROZEN

GYROZEN 1730R Manual de usuario

GYROZEN

GYROZEN 2236R Manual de usuario

GYROZEN

GYROZEN MicroCentrifuge mini Manual de usuario

GYROZEN

GYROZEN 1736R Manual de usuario

GYROZEN

GYROZEN 1248R Manual de usuario

GYROZEN

GYROZEN 416 Manual de usuario

GYROZEN

GYROZEN 2236R Manual de usuario

GYROZEN

GYROZEN 416 Manual de usuario

GYROZEN

GYROZEN 1848R Manual de usuario

GYROZEN

GYROZEN mini Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario