GW Security GW-NVR3208E Manual de usuario
Network Video Recorder User Manual
Welcome, and thank you for purchasing your GW Security product.
This user manual is a reference tool for installing and operating your NVR. Please read this
manual before installation and operation to ensure an optimal experience with your NVR.
Contents
1. Features and Safety 3
1.1 Features 3
1.2 Safeguards and Warnings 3
1.2.1 Packing List 3
2. Product Appearance 4
3. Device Installation 4
3.1 NVR Connections Diagram 4
3.2 Installing a HDD 5
4. Basic Operation 6
4.1 Powering On and Shutting Down the NVR 6
4.2 Start-up Wizard 6
4.3 Mouse Operation 7
4.4 Virtual Keyboard 7
4.5 Navigation Bar 7
5. The Main Menu 8
5.1 Main Menu Flowchart 9
5.2 Data Inquiry 10
5.2.1 Time Inquiry 10
5.2.1.1 Intel Play 10
5.2.2 Data Manager 12
5.3 Backup 13
5.3.1 Quick Backup and Manual Backup 13
5.3.2 Schedule Backup 14
5.4 Record 14
5.4.1 Recording Parameters 14
5.4.2 Manual Recording 16
5.4.3 Scheduled Recording 16
5.5 Alarm Settings 17
5.5.1 Motion Detection 17
5.5.2 Alarm Output 18
5.5.3 Other Alarms 18
5.6 IPC Management 19
5.6.1 Adding IP Cameras 19
5.6.1.1 Adding via Manual Add 20
5.6.1.2 Adding via the “Plus” Icon 20
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
5.6.1.3 Adding via Smart Access 20
5.6.2 Removing IP Cameras 20
5.6.3 Other Options 20
5.7 Settings Management 21
5.7.1 General Settings 21
5.7.2 Time Settings 22
5.7.2.1 Daylight Saving Time (DST) 22
5.7.2.2 NTP Settings (Internet Time) 23
5.7.3 Output 23
5.7.3.1 Channel Settings 23
5.7.3.2 Display Sequence 24
5.7.3.3 Output Mode 25
5.7.4 Network Sub-menu 25
5.7.4.1 Network Settings 26
5.7.4.2 DDNS Settings 26
5.7.4.3 PPPOE Settings 27
5.7.4.4 Email Settings 28
5.7.4.5 Advanced Settings 28
5.7.4.6 Cloud Service 29
5.7.4.7 Network Bridge 29
5.8 HDD Manager 30
5.8.1 Basic Information 30
5.8.2 HDD Group 31
5.8.3 Storage Settings 31
5.8.4 SMART 32
5.9 System Information 32
5.9.1 Device Information 32
5.9.2 Channel Status 33
5.9.3 Alarm Status 33
5.9.4 Online Status 33
5.9.5 Log Inquiry 33
5.10 System Maintenance 33
5.10.1 Quick Settings 33
5.10.2 Account Maintenance 33
5.10.3 Reset to Default 33
5.10.4 Upgrade 34
5.10.4.1 Upgrade via FTP 34
5.10.4.2 Upgrade via USB 34
5.10.4.3 Upgrade via Web Browser 34
5.10.5 Schedule Restart 34
5.10.6 System Shutdown 34
6. NVR Remote Access 35
6.1 Remote Access via LAN 35
6.2 Remote Access via WAN 35
7. Specifications 36
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
1. Features and Safety
1.1 Features
The GW SMART Series NVR is a high performance network video recorder. The NVR supports local preview, multi-window
display, local recording storage, mouse shortcut menu operations, remote management and control functions.
1.2 Safeguards and Warnings
1. Electrical Safety
Installation and operation should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for any fires or electric shock caused by improper handling or installation.
2. Handling
Avoid heavy stress, violent vibrations, and moisture during transportation, storage, or installation.
3. Warnings
Keep upright and handle with care.
Do not apply power to the NVR before completing the installation.
Do not place objects on the NVR.
Do not use near water; do not use the device with wet hands.
Do not remove any cable connectors while the device is powered on.
Do not open the NVR’s case while the power is on.
4. Qualified Technician
All examination and repair work should be done by qualified service technicians.
We are not liable for any problems caused by unauthorized modifications or attempted repairs.
5. Operating Environment
The NVR should be installed in a cool, dry place away from direct sunlight, flammable materials, explosive substances, etc.
Required temperature: 50°F ~ 122°F
Required humidity: 15% ~ 85%
6. Accessories
Before installing, check the package to ensure all the accessories are included. Contact our office immediately if something is
broken or missing from your package. Be sure to only use accessories recommended by the manufacturer.
1.2.1 Packing List
Item
Quantity
DVR/NVR
1x
Power Adapter
1x
NVR Quick Guide
1x
NVR Manual
1x
Software CD
1x
USB Mouse
1x
IR Remote Control (Optional)
1x
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
2. Product Appearance
(GW2208E-P shown)
3. Device Installation
3.1 NVR Connections Diagram
Follow the pictures below when connecting cables and components.
(GW2208E-P shown)
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
(GW3208E shown)
3.2 Installing a HDD
Open the front panel as pictured.
Install the HDD into the HDD placement bracket.
Step 1: Open the HDD bracket by unlatching the metal clip on back of the bracket. Place the bracket around the HDD and
ensure the SATA port connectors are aligned with the opening in the bracket and not covered.
Step 2: Close the metal clip to secure the HDD in the bracket.
Step3: Insert the HDD into the NVR and close the front panel as shown below.
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
4. Basic Operation
4.1 Powering On and Shutting Down the NVR
To power on the NVR, flip the power switch located on the rear of the unit after connecting the power cable, monitor, mouse,
and installing the HDD.
(GW2208E-P shown)
To shut down the NVR, press the Shutdown button on the front of the unit, or by right clicking and selecting [Shutdown] from
the menu in the NVR interface. After the NVR has shut down, the unit can be safely disconnected from the power supply.
4.2 Start-up Wizard
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
4.3 Mouse Operation
The NVR interface is operated by a mouse after connecting one to the unit’s USB port.
Mouse Part
Action
Command
Left Mouse Button
Single Click
In Preview: Select current screen and display context menu.
In Menu: Select/Confirm
Double Click
In Preview or Playback: Switch between single and multi-screen display.
In Data Inquiry or Backup: Play a selected segment of video.
Display calendar when inputting date.
Click and Drag
Select motion sensitive areas.
Adjust brightness, contrast, and saturation.
Select the digital zoom range.
Right Mouse Button
Single Click
In Preview: Show the pop-up menu.
In Menu: Exit the current menu, go back to the previous menu layer.
Scroll Wheel
Scroll Up
In Selection Box: Scroll up through options.
In Scrollbar: Scroll up the page.
Scroll Down
In Selection Box: Scroll down through options.
In Scrollbar: Scroll down the page.
4.4 Virtual Keyboard
Whenever text needs to be input into a field in the NVR interface a virtual keyboard will be displayed. The virtual keyboard can
be utilized through the mouse.
4.5 Navigation Bar
The Navigation Bar is displayed at the bottom of the screen in the NVR interface. It allows for access to [Main Menu] and quick
access to other common functions. It also displays used HDD space and the current time.
Left click to access the [Main Menu]
& Left click to Log in and out of the administrator account.
●Default username: admin
●Default password: 888888
●After three failed login attempts the interface will automatically lockout for 20 seconds.
●It is highly recommended that you change the default password after initial login.
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
Left click for quick access to the alarm status interface.
Left click for quick access to network diagnosis and repair.
Left click to adjust the live view screen.
& Left click to adjust the channel layout.
Left click to show or hide the Navigation Bar.
Left click for playback of the last five minutes.
Left click for quick access to the cloud services interface.
5. The Main Menu
After logging in, the [Main Menu] can be access either by left clicking the icon on the Navigation Bar, or right clicking the
live view and selecting [Main Menu] from the pop-up menu. The [Main Menu] will appear as below.
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
5.1 Main Menu Flowchart
Flowchart Part 1:
Flowchart Part 2:
Flowchart Part 3:
(Note: Different models may have slightly different menu options. This chart is from the 22XX series.)
Official Website: www.gwsecurityusa.com
Email: [email protected]
Business Hours: Mon-Fri 9am to 5:30pm PST/PDT
Tel: 626-350-0555
Otros manuales para GW-NVR3208E
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Hardware de red de GW Security
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
