GW Instek GUT-6000A Manual de usuario

GUT-6000A

Digital IC Tester

USER MANUAL

GUT-6000A USER MANUAL

INTRODUCTION...................................................3

FEATURES...........................................................4

SPECIFICATIONS.................................................5

CONTROLS & INDICATORS................................6

KEYS’ INSTRUCTION...........................................7

OPERATIONAL INSTRUCTIONS.........................8

1. OPERATIONAL PROCEDURES......................8

2. TESTING PROCEDURES................................9

3. AUTO LOOP TEST...........................................10

4. AUTO Search....................................................11

TROUBLE SHOOTING........................................12

MESSAGE DESCRIPTIO.....................................13

KEY CODE DESCRIPTION.................................15

TOTAL ASSEMBLY.............................................16

KEY CODE TABLES............................................17

GUT-6000A USER MANUAL

INTRODUCTION

GOOD WILL INSTRUMENT CO., LTD., accumulated over 30 years experiences in

electronic products’ research and development, is a pioneering manufacturer in IC

testers industry. The GUT-6000A, desktop design, is a newly launched and best

quality possible and multi-functions equipped product.

User’s friendly sets up by replacing another IC; the GUT-6000A continues to

undertake the task. The hard ware design of ''black-light'' function extends user’s

convenience for testing ICs in an inadequate light environment. The Buzzer key

built in various tones can easily identify the testing result. The unique capability

in identifying over 1800 CMOS/TTL digital ICs (up to 24 pins) surpasses the other

major digital IC testers.

The GUT-6000A feature such as built in ''auto search & test'' speeds to identify

and test IC. In addition, the ''loop'' design for continuously testing function is

intelligently applied to detect defective ICs and their stability. All these strengths

provide signicantly conveniences for digital IC testers.

All the GUT-6000A accumulated incalculable benets are to be discovered as

users utilize the value-added, multi-functions equipped tester. This is a best

choice for the factories, R&D sections, maintenance departments, laboratories as

well as academics because it really creates future with your business.

GUT-6000A USER MANUAL

FEATURES

● Reliable desktop design.

● User’s friendly set up and operates.

● 16*1 character 9*7 dot matrix LCD display.

● Built in 6 functions and 10 numerical keys.

● Identifier over 1800 CMOS/TTL digital ICs (up to 24 pins).

● High test speed at an average 0.8 second for one IC test.

● The following IC series can be tested under 5V.

■ Texas Instruments 54/74 TTL series.

■ Motorola 14000 and RCA CD4000 CMOS series.

■ Other compatible ICs with the above mentioned devices.

● ''AUTO'' function key supports ''auto search and test'' function. User only to put

the IC into the socket, no need to press any key, no need to process any other

movements, the ''auto search and test'' will continue processing.

● ''LOOP'' function key supports ''continue examining'', able to make sure

reliability of the IC.

● Various ''BUZZER'' sounds to presents the test results ''FAIL'', or ''PASS''.

GUT-6000A USER MANUAL

SPECIFICATIONS

DISPLAY 16*1 character dot matrix LCD display

TEST SOCKET One position for 28 Pin IC socket

OPERATIONAL KEY

( 1 ) TTL/CMOS, BUZZER, LOOP,

AUTO, GO, BACK SPACE

( 2 ) 10 numerical keys ( 0 – 9 )

TEST VOLTAGE 5 - 24VDC

ALARM Various tones for the test result

POWER SUPPLY 110/220VAC, 50/60 Hz(Auto range)

OPERARING

TEMPERATURE 10℃to 40 ℃

STORAGE TEMPERATURE 0℃ to 50 ℃

MEASURENENT 13”(W) x 11.8”(D) x 4.3”(H)

WEIGHT 3.3 LB ( 1.5Kg )

GUT-6000A USER MANUAL

CONTROLS & INDICATORS

(1) Liquid Crystal Display…..…....16*1 character 9*7 dot matrix LCD display

(2) 28Pin Test IC Socket

(3) Keyboard

(4) Fuse …………………………...1A, protects tester from damage

(5) Power Switch …………………Power on or off

(6) AC Receptacle ….…………...Plug in power cord

(7) GND…………………………...Ground

GUT-6000A USER MANUAL

KEYS’ INSTRUCTION

KEYS INSTRUCTION

Numerical Keys

Input IC numbers for test.

Execution key

● Executes testing work as inputting a device

number.

● Repeats test.

IC series selection key

● Switches selection TTL74, CMOS40 or

CMOS45 IC series

Auto search & test key

● Auto detects IC number

● Auto test IC

● If change into new IC, the ''auto search &

test'' will auto detect the IC, and continue to

test.

Loop Test key

● Tests IC's stability

● Stop and show errors as defective IC is found

● Press any key to stop running

● If take the IC away, the LCD will show

''EMPTY''. Then, if put any IC into socket, the

''LOOP'' function will continue.

● Use numerical key of 0 to 9, key in the IC's

number , and press ''LOOP'' key to process

loop test.

Back space Key

● Erases wrong number in the left side of ←

BUZZERING switching key

● Switches BUZZER on/off

AUTO

TTL/

CMOS

LOOP

BUZZER

GUT-6000A USER MANUAL

OPERATIONAL INSTRUCTIONS

1. OPERATIONAL PROCEDURES

STEP1. Plug in AC power cord, then switch power on.

The black light of LCD is on and presents software version.

It starts self-test.

STEP2. Auto search the IC number and test if an IC is on the socket.

STEP3. Use TTL/CMOS to switch the selection of ''TTL74'', ''CMOS40'' or

''CMOS45'' series ICs.

No system error found displays on the LCD

System error shows on the LCD if it is detected.

GUT-6000A USER MANUAL

2. TESTING PROCEDURES

STEP1. Put IC on the socket and IC’s bottom line up with socket. Pin 1 side

faces up.

STEP2. Input the IC number such as the TTL 74LS244, and user types in IC

number in order.

STEP4. Repeat test by replacing a new IC, then press .

STEP5. Re-type the IC’s numbers for other another test.

Note. ''Pass'' may also happen to some logic function compatible but

different number’s two ICs if their numbers are exchanged with each

other to test.

IC pin 1 side faces up

Pass test displays on the LCD

LCD display

Fail test displays on the LCD

Pull down pin-stabler.

324

STEP3. Press , then the test works. Follow-up test result is displayed

on the LCD.

GUT-6000A USER MANUAL

3. AUTO LOOP TEST

1. When an IC is tested, the test results appear unstable such as sometimes

good and sometimes not. The auto loop test is designed to detect this kind of

problem.

2. When a big quantity of same number of IC need to be test, the auto loop test

is speeding the process.

STEP1. Put IC into the socket and IC’s bottom line up with socket. Pin 1 side

faces up.

STEP2. Input the IC number such as the TTL 74LS244 device, and user

types in IC number in order.

STEP3. Press , then the test is running. Follow-up test result is

displayed on the LCD.

Error found was displayed on the LCD, ''Error in: nnnnn'', nnnnn means the

number of the error times.

STEP4. If take the IC away from the socket, the system will back to waiting

IC put in situation.

STEP5. Put IC into the socket, tight down the pin-stabler, the system will stat

the ''auto loop test''.

STEP6. Press any key to stop the ''auto loop test''.

IC pin 1 side faces up Pull down pin-stabler

244

LCD display

LOOP

Tabla de contenidos

Otros manuales de Equipo de prueba de GW Instek

GW Instek

GW Instek C-1200 Manual de usuario

GW Instek

GW Instek GCT-9040 Manual de usuario

GW Instek

GW Instek GDS-3000 Series Manual de usuario

GW Instek

GW Instek GLC-10000 Manual de usuario

GW Instek

GW Instek GPT-9500 Series Manual de usuario

GW Instek

GW Instek GOS-6103C Manual de usuario

GW Instek

GW Instek GDS-1000-U Series Manual de usuario

GW Instek

GW Instek GDS-1000B Series Manual del propietario

GW Instek

GW Instek GDS-2072A Manual de usuario

GW Instek

GW Instek GLC-9000 Manual de usuario

GW Instek

GW Instek GDS-1000A Series Manual del propietario

GW Instek

GW Instek GPT-9801 Manual de usuario

GW Instek

GW Instek GDS-3000 Series Manual del propietario

GW Instek

GW Instek GDS-1000B Series Manual del propietario

GW Instek

GW Instek GPT-9000 series Manual de usuario

GW Instek

GW Instek MDO-2000E Series Manual de usuario

GW Instek

GW Instek MSO-2000E Manual de usuario

GW Instek

GW Instek GDS-1000A-U Series Manual de usuario

GW Instek

GW Instek GPT-9801 Manual de usuario

GW Instek

GW Instek LCR-05A Manual de usuario

GW Instek

GW Instek PEL-3000AH Series Manual de usuario

GW Instek

GW Instek GDS-3352A Manual de usuario

GW Instek

GW Instek GRA-440 Manual de usuario

GW Instek

GW Instek GDS-3000 Series Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario